D-Link DGS-2208 - Desktop Switch Bedienungsanleitung

2D-Link DGS-2208 User Manual

Table of Contents

Safety Instructions ......................................................3

Safety Cautions .......................................................3

Protecting Against Electrostatic Discharge ..............6

Product Overview ........................................................7

Package Contents ...................................................7

Setup .......................................................................7

Introduction ..............................................................8

Features .................................................................11

Hardware Overview ............................................... 12

Front Panel (LEDs) .......................................... 12

Rear Panel (Connections) ................................15

Installation ..................................................................16

Before You Connect to the Network ....................... 16

Mounting the Switch on the Wall ............................ 17

Mounting on a cement wall .............................. 17

Mounting on a wood wall .................................17

Connecting the Switch ...........................................18

DGS-2208 to End Node ...................................18

Hub/Switch to DGS-2208 ................................. 18

Connecting To Network Backbone or Server ... 18

Troubleshooting .........................................................19

Glossary ..................................................................... 20

Networking Basics .................................................... 27

Check your IP address ..........................................27

Statically Assign an IP address ............................. 28

Technical Speciﬁcations ........................................... 29

DGS-2208 Speciﬁcations ......................................29

Contacting Technical Support .................................. 31

Warranty .....................................................................32

Registration ................................................................ 37

Table of Contents

3D-Link DGS-2208 User Manual

Section 1 - Safety Instructions

Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential

damage.

Safety Cautions

To reduce the risk of bodily injury, electrical shock, ﬁre, and damage to the equipment, observe the following

precautions.

Observe and follow service markings. Do not service any product except as explained in your system documentation.

Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to an

electrical shock. Only a trained service technician should service components inside these compartments.

If any of the following conditions occur, unplug the product from the electrical outlet and replace the part or contact

your trained service provider:

– The power cable, extension cable, or plug is damaged.

– An object has fallen into the product.

– The product has been exposed to water.

– The product has been dropped or damaged.

– The product does not operate correctly when you follow the operating instructions.

• Keep your system away from radiators and heat sources. Also, do not block cooling vents.

• Do not spill food or liquids on your system components, and never operate the product in a wet environment. If

the system gets wet, see the appropriate section in your troubleshooting guide or contact your trained service

provider.

Safety Instructions

4D-Link DGS-2208 User Manual

Section 1 - Safety Instructions

• Do not push any objects into the openings of your system. Doing so can cause a ﬁre or an electric shock by

shorting out interior components.

• Use the product only with approved equipment.

• Allow the product to cool before removing covers or touching internal components.

• Operate the product only from the type of external power source indicated on the electrical ratings label. If you

are not sure of the type of power source required, consult your service provider or local power company.

• To help avoid damaging your system, be sure the voltage selection switch (if provided) on the power supply is

set to match the power available at your location:

– 115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such

as South Korea and Taiwan.

– 100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan.

– 230 V/50 Hz in most of Europe, the Middle East, and the Far East.

• Also be sure that attached devices are electrically rated to operate with the power available in your location.

• Use only approved power cable(s). If you have not been provided with a power cable for your system or for any

AC-powered option intended for your system, purchase a power cable that is approved for use in your country.

The power cable must be rated for the product and for the voltage and current marked on the product’s electrical

ratings label. The voltage and current rating of the cable should be greater than the ratings marked on the

product.

• To help prevent an electric shock, plug the system and peripheral power cables into properly grounded electrical

outlets. These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter

plugs or remove the grounding prong from a cable. If you must use an extension cable, use a 3-wire cable with

properly grounded plugs.

5D-Link DGS-2208 User Manual

Section 1 - Safety Instructions

• Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged

into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension

cable or power strip.

• To help protect your system from sudden, transient increases and decreases in electrical power, use a surge

suppressor, line conditioner, or uninterruptible power supply (UPS).

• Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped

over. Be sure that nothing rests on any cables.

• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modiﬁcations.

Always follow your local/national wiring rules.

• When connecting or disconnecting power to hot-pluggable power supplies, if offered with your system, observe

the following guidelines:

– Install the power supply before connecting the power cable to the power supply.

– Unplug the power cable before removing the power supply.

– If the system has multiple sources of power, disconnect power from the system by unplugging all power

cables from the power supplies.

• Move products with care; ensure that all casters and/or stabilizers are ﬁrmly connected to the system. Avoid

sudden stops and uneven surfaces.

6D-Link DGS-2208 User Manual

Section 1 - Safety Instructions

Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity

from your body before you touch any of the electronic components, such as the microprocessor. You can do so by

periodically touching an unpainted metal surface on the chassis.

You can also take the following steps to prevent damage from electrostatic discharge (ESD):

1. When unpacking a static-sensitive component from its shipping carton, do not remove the component

from the antistatic packing material until you are ready to install the component in your system. Just

before unwrapping the antistatic packaging, be sure to discharge static electricity from your body.

2. When transporting a sensitive component, ﬁrst place it in an antistatic container or packaging.

3. Handle all sensitive components in a static-safe area. If possible, use antistatic ﬂoor pads, workbench

pads, and an antistatic grounding strap.

Protecting Against Electrostatic Discharge

7D-Link DGS-2208 User Manual

Section 2 - Product Overview

• D-Link DGS-2208 8-port Switch

• Manual and Warranty on CD

• Four (4) Rubber Feet

• Wall Mount Kit

• Power Adapter

Setup

The setup of the DGS-2208 can be performed using the following steps:

• The power outlet should be within 1.82 meters (6 feet) of the Switch.

• Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.

• Do not cover the ventilation holes on the sides of the Switch, and make sure there is adequate ventilation

around it.

• Do not place heavy objects on the switch.

Product Overview

Package Contents

8D-Link DGS-2208 User Manual

Section 2 - Product Overview

Introduction

Fast Ethernet Technology

The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need

for high performance networks. 100BASE-TX (Fast Ethernet) provides a cost-effective and high-performance solution for

small workgroups, SMBs (Small to Medium Businesses), and any network supporting bandwidth-intensive applications.

Fast Ethernet technology operates at 10 times the speed of traditional Ethernet, offering maximum performance and

enhanced capability for existing Ethernet-based networks.

100Mbps Fast Ethernet is a standard speciﬁed by the IEEE 802.3 LAN committee. It is an extension of the 10Mbps

Ethernet standard with the ability to transmit and receive data at 100Mbps, while maintaining the CSMA/CD Ethernet

protocol. Since the 100Mbps Fast Ethernet is compatible with all other 10Mbps Ethernet environments, it provides

a straightforward upgrade and takes advantage of the existing investment in hardware, software, and personnel

training.

Gigabit Ethernet Technology

Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support

for CSMA/CD protocol, full duplex, ﬂow control, and management objects, but with a tenfold increase in theoretical

throughput over 100Mbps Fast Ethernet and a one hundred-fold increase over 10Mbps Ethernet. Since it is compatible

with all 10Mbps and 100Mbps Ethernet environments, Gigabit Ethernet provides a straightforward upgrade without

wasting a company’s existing investment in hardware, software, and trained personnel.

The increased speed and extra bandwidth offered by Gigabit Ethernet are essential to coping with the network bottlenecks

that frequently develop as computers and their busses get faster and more users use applications that generate more

trafﬁc. Upgrading key components, such as your backbone and servers to Gigabit Ethernet can greatly improve network

response times as well as signiﬁcantly speed up the trafﬁc between your subnetworks.

Gigabit Ethernet enables fast optical ﬁber connections to support video conferencing, complex imaging, and similar

data-intensive applications. Likewise, since data transfers occur 10 times faster than Fast Ethernet, servers outﬁtted

with Gigabit Ethernet NIC’s are able to perform 10 times the number of operations in the same amount of time.

In addition, the phenomenal bandwidth delivered by Gigabit Ethernet is the most cost-effective method to take advantage

of today and tomorrow’s rapidly improving switching and routing internetworking technologies.

9D-Link DGS-2208 User Manual

Section 2 - Product Overview

Switching Technology

Switching is a cost-effective way of increasing the total network capacity available to users on a LAN. If an Ethernet

network begins to display symptoms of congestion, low throughput, slow response times, and high rates of collision,

installing a switch to a network can preserve much or all of the existing network’s cabling and workstation interface card

infrastructure, while still greatly enhancing the throughput for users. A switch is a viable solution even if demanding

applications, such as multimedia production and video conferencing, are on the horizon. The most promising techniques,

as well as the best return on investment, could well consist of installing the right mixture of Ethernet switches.

A switch increases capacity and decreases network loading by dividing a local area network into different LAN

segments. Dividing a LAN into multiple segments is one of the most common ways of increasing available bandwidth.

If segmented correctly, most network trafﬁc will remain within a single segment, enjoying the full-line speed bandwidth

of that segment.

Switches provide full-line speed and dedicated bandwidth for all connections. This is in contrast to hubs, which use the

traditional shared networking topology, where the connected nodes contend for the same network bandwidth. When

two switching nodes are communicating, they are connected with a dedicated channel between them, so there is no

contention for network bandwidth with other nodes. As a result, the switch reduces considerably, the likelihood of trafﬁc

congestion.

For Ethernet networks, a switch is an effective way of eliminating the problem of chaining hubs beyond the “two-repeater

limit.” A switch can be used to split parts of the network into different collision domains, making it possible to expand

your Ethernet network beyond the 205-meter network diameter limit for 100BASE-TX networks. Switches supporting

both 10Mbps Ethernet and 100Mbps Fast Ethernet are also ideal for bridging between existing 10Mbps networks and

newer 100Mbps networks.

Switching LAN technology is a marked improvement over the previous generation of network hubs and bridges, which

were characterized by higher latencies. Routers have also been used to segment local area networks, but the cost of

a router, the setup and maintenance required, make routers relatively impractical. Today switches are an ideal solution

to most kinds of local area network congestion problems.

10D-Link DGS-2208 User Manual

Section 2 - Product Overview

802.1p Priority Tagging

802.1p places a tag in a frame to indicate the priority of the frame. A tag will represent a priority of 0-7 and an 802.1p

compliant switch can read this tag and prioritize trafﬁc accordingly. In 802.1p a port can receive frames with varying

priority tags and classify them based on these tags. A VoIP phone that supports 802.1p can assign a priority to its

VoIP trafﬁc and when it enters the switch the switch can give it a higher priority so that voice trafﬁc is always clear and

jitter free. The DGS-2208 supports the 802.1p feature with 4 preconﬁgured priority queues. When a frame tagged with

an 802.1p priority bit is received by the switch it places the frame into one of 4 queues prioritized according to its tag

number. For example, trafﬁc tagged with a priority bit of 7 will have a higher priority then trafﬁc tagged with a priority

bit of 6 and so forth.

Jumbo Frame Support

The DGS-2208 switch supports Jumbo Frames up to (9K) in size. Jumbo Frame support is designed to improve network

throughput and signiﬁcantly reduce the CPU utilization of large ﬁle transfers such as multimedia ﬁles or large data ﬁles

by enabling more efﬁcient larger payloads per packet.

Andere Handbücher für DGS-2208 - Desktop Switch

Inhaltsverzeichnis

Andere D-Link Schalten Handbücher

D-Link

D-Link DES-3224 - Switch Bedienungsanleitung

D-Link

D-Link DGS-3000-28L Bedienungsanleitung

D-Link

D-Link DES-3028 Bedienungsanleitung

D-Link

D-Link DFE-904 Bedienungsanleitung

D-Link

D-Link xStack DGS-3427 Bedienungsanleitung

D-Link

D-Link DGS-3000-28XMP Bedienungsanleitung

D-Link

D-Link DWS-3160-24TC Bedienungsanleitung

D-Link

D-Link DGS-1024TG Bedienungsanleitung

D-Link

D-Link DES-3028 Bedienungsanleitung

D-Link

D-Link DGS-105 - Switch Bedienungsanleitung

D-Link

D-Link DGS-1100-06/ME Bedienungsanleitung

D-Link

D-Link DWS-1008 Bedienungsanleitung

D-Link

D-Link xStack DES-3200-28 Bedienungsanleitung

D-Link

D-Link DES-3252P - Web Smart Switch Bedienungsanleitung

D-Link

D-Link DUB-H4 - Hub - USB Bedienungsanleitung

D-Link

D-Link Web Smart DES-1210-28P Bedienungsanleitung

D-Link

D-Link DES-1218 Bedienungsanleitung

D-Link

D-Link DES-1005E Bedienungsanleitung

D-Link

D-Link DGS-1100-26MP Bedienungsanleitung

D-Link

D-Link DGS-1216T - Switch Bedienungsanleitung

D-Link

D-Link DGS-1005G Bedienungsanleitung

D-Link

D-Link xStack Handbuch

D-Link

D-Link DGS-3100 SERIES Bedienungsanleitung

D-Link

D-Link DES-7200 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung