D-Link DGS-F1210 Series Bedienungsanleitung

PRODUCT QUICK INSTALLATION GUIDE

DGS-F1210-10PS-E

DGS-F1210-18PS-E

DGS-F1210-26PS-E

DGS-F1210-26MPS-E

1.1 Package Contents

The package contains the following items:

•PoE Switch

•Power Cord

•19” Rack Mounting Kit

•Quick Installation Guide

1.2 Safety Instructions

Use the following safety guidelines to ensure your own personal safety and to help

protect your equipment from potential damage.

•The power cable should be disconnected from the mains during the installation process;

•Wear a grounded anti-static wrist band to avoid the build-up of static electricity;

•Power the product only from the type of external power source indicated on the electrical

ratings label;

•Observe extension cable and power strip ratings. Make sure that the total ampere rating of all

products plugged into the extension cable or power strip does not exceed 80 percent of the

ampere ratings limit for the extension cable or power strip;

To avoid the risk of electric shock, do not open the Switch housing.

•Do not use damaged power cords. Do not modify power cables or plugs.

1.3 Connecting Power

Connect one end of the power cord to the rear of the Switch, and the other end to the mains power

outlet.

1.4 Product Connection Diagram

Front Panel

(The number of RJ45 ports varies depending on model)

1 –Shortcut buttons (DIP Switches)

2 –LEDs

3 –Console port

4 –Reset button

5 –RJ45 PoE ports with Long Reach option (up to 250m)

6 –RJ45 PoE ports

7 –SFP ports

1.5 Product Installation

The Switch can be installed on a desktop, shelf or mounted in a standard 19-inch Rack.

To install the Switch in a rack, attach the supplied mounting brackets to the side of the Switch and

fasten the brackets to the sides of the Switch using the screws from the Switch mounting kit.

Align the brackets and rack holes. Fasten each bracket to the rack.

1.6 Shortcut Buttons (DIP Switches)

Some Switch settings can be applied using the Shortcut Buttons (DIP Switches), without the need to

log into the Switch interface.

DIP Switch

Function when in ON position

AI QOS

Improve video data processing capabilities and improve the monitoring of

Caton and Mosaic phenomena on the network.

AI Extend

Set ports 1 to 8 rate to 10Mbps, but the transmission distance increases

up to 250 meters.

AI VLAN

Isolate RJ45 ports (1-8), (1-16), (1-24) from each other, suppress network

storms and improve network performance. Uplink ports (9-10), (17-18),

(25-26) continue to communicate with all ports.

AI PoE

Automatically restart a remote device by disabling and re-enabling PoE on

the port if it detects the remote device has locked up (no incoming traffic).

1.7 Web-based Management Interface

In order to login and configure the Switch via an Ethernet connection, the PC must have an IP address

in the same range as the Switch. For example, if the Switch has an IP address of 192.168.254.1, the PC

should have an IP address of 192.168.254.x (where x is a number between 2 and 254), with subnet

mask of 255.255.255.0.

The default IP address of the Switch is 192.168.254.1

Open your web browser and enter http://192.168.254.1 in the address bar. Then press <Enter>.

The default username is “admin”, the default password is “admin”.

It is recommended to apply a secure strong password to “admin” account under System Settings >>

User Management.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere D-Link Schalten Handbücher

D-Link

D-Link DGS-1224T - Web Smart Switch Bedienungsanleitung

D-Link

D-Link 1016T - DGS Switch Bedienungsanleitung

D-Link

D-Link DSS-100E-6P Bedienungsanleitung

D-Link

D-Link GO-SW-5G Bedienungsanleitung

D-Link

D-Link 55443 Bedienungsanleitung

D-Link

D-Link DGS-1005D - Switch Bedienungsanleitung

D-Link

D-Link DGS-3130 Series Handbuch

D-Link

D-Link DUB-H4 - Hub - USB Bedienungsanleitung

D-Link

D-Link DMS-107/E Bedienungsanleitung

D-Link

D-Link EasySmart DGS-1100-05 Bedienungsanleitung

D-Link

D-Link DKVM-2K Bedienungsanleitung

D-Link

D-Link TM DES-6500 Bedienungsanleitung

D-Link

D-Link DES-3226SM - 1000Mbps Ethernet Switch Bedienungsanleitung

D-Link

D-Link DUB-M530 Bedienungsanleitung

D-Link

D-Link DGS-1210-52MP Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

D-Link

D-Link DHP-342 Bedienungsanleitung

D-Link

D-Link DES-1016A/C1A Bedienungsanleitung

D-Link

D-Link DES-1008PA Bedienungsanleitung

D-Link

D-Link DXS-3227 - xStack Switch - Stackable Bedienungsanleitung

D-Link

D-Link DES-3550 Bedienungsanleitung

D-Link

D-Link EasySmart DGS-1100-08 Bedienungsanleitung

D-Link

D-Link xStack DGS-3620 Series Bedienungsanleitung

D-Link

D-Link xStack DGS-3612G series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung