D-Link KVM-121 Bedienungsanleitung

KVM SWITCH

Quick Installation Guide+

Руководство по быстрой установке+

Guía de Instalación Rápida+

Guia de Instalação Rápida+

快速安裝指南+

Petunjuk Pemasangan Cepat+

WIRED

KVM-121

Install Guide

KVM-121

KVM Switch

System Requirements

• PS/2 keyboard

• PS/2 Mouse

• Speakers or Headphones

• VGA or Higher Monitor

2 Sets of KVM Cables

Package Contents

D-Link KVM-121

KVM Switch

System Requirements

If any of the above items are missing, please contact your reseller.

Quick Install Guide

Hardware Overview

Audio Jack

VGA Port

Keyboard Port

Mouse Port

KVM Cables

Plug the cables from your keyboard, monitor, sound card, and mouse into the KVM

switch, and plug the supplied cables from your KVM switch into your computers.

Select Button

Press the select button to switch quickly and easily between both computers.

Hardware Overview

The KVM-121 is assembled with the supplied KVM cables fastened

to the PC 1 and PC 2 ports. Plug the cable from PC 1 into your rst

computer (Computer 1), and plug the cable from PC 2 into your second

computer (Computer 2).

PC1

Connect the audio and VGA cable to your rst

computer (Computer 1).

PC2

Connect your audio or VGA cable to your second

computer (Computer 2).

Hardware Installation

Attach your headphone or speakers

to the green audio jack located on

the KVM-121.

Attach your monitor’s 15-pin VGA

connector to the blue VGA port

located on the KVM-121.

Attach your computer’s 6-pin PS/2

male keyboard connector to the

purple keyboard port located on the

KVM-121.

Hardware Installation

Attach your computer’s 6-pin PS/2

male mouse connector to the green

mouse port located on the KVM-121.

Note: Make sure that all your computers are turned OFF before

installing the KVM-121 to avoid mouse and keyboard errors when

booting up your computers.

Hardware Installation

The following steps apply to both computers that will be used with

the KVM-121. Start by attaching the cables connected from the PC

1 port of the KVM-121 to Computer 1.

Connect the KVM-121’s included

monitor cable (blue coated) to the

VGA port located on the back of your

computer case.

Plug the KVM-121’s included

keyboard cable (purple coated) to

the PS/2 keyboard port located on

the back of your computer case.

Plug the KVM-121’s included mouse

cable (green coated) to the PS/2

mouse port located on the back of

your computer case.

Hardware Installation

Plug the KVM-121’s included audio

cable to the audio jack located on the

back of your computer case.

Note: Repeat these steps to attach

the cables connected from the PC 2

port of the KVM-121 to Computer 2.

Power ON both of your attached computers after you have completed

the KVM-121 installation.

Once you’ve completed your KVM-121 installation, your connections

may appear similar to the diagram below.

Switching the KVM-121

You can use your keyboard to switch between your computers. Press

and hold the Scroll Lock key twice to enter the Hot Key switching mode.

A beep conrms that the Hot Key switching mode is activated.

Switching the KVM-121

Hot Key Menu

Scroll Lock + Scroll Lock + 1 : Switches to PC1 only.

Scroll Lock + Scroll Lock + 2 : Switches to PC2 only.

Scroll Lock + Scroll Lock + F1 : Switches to PC1 with audio

signal synchronously.

Scroll Lock + Scroll Lock + F2 : Switches to PC2 with audio

signal synchronously.

Scroll Lock + Scroll Lock + → : Switches to the next PC

with audio signal synchronously.

Scroll Lock + Scroll Lock + ← : Switches to the previous PC

with audio signal synchronously.

Scroll Lock + Scroll Lock + B : Enable/Disable Beep.

Scroll Lock + Scroll Lock + M : Resets the mouse and keyboard.

Scroll Lock + Scroll Lock + S : Auto-Scan Mode automatically

switches between computers

every 10 seconds (Monitor Only).

Spacebar : Exits Auto Scan Mode.

Andere Handbücher für KVM-121

Inhaltsverzeichnis

Sprachen:

Andere D-Link Schalten Handbücher

D-Link

D-Link DGS-3630 SERIES Bedienungsanleitung

D-Link

D-Link DES-3326SR Bedienungsanleitung

D-Link

D-Link DGS-3000-28XMP Bedienungsanleitung

D-Link

D-Link DUB-1370 Bedienungsanleitung

D-Link

D-Link DGS-1210-20/FL Bedienungsanleitung

D-Link

D-Link DSS-8+ Bedienungsanleitung

D-Link

D-Link DAS-3324 Bedienungsanleitung

D-Link

D-Link DGS-1248T - Switch Bedienungsanleitung

D-Link

D-Link DGS-1100-10MPP Bedienungsanleitung

D-Link

D-Link DCH-G020X Bedienungsanleitung

D-Link

D-Link DE-81 6TP Bedienungsanleitung

D-Link

D-Link DGS-3100 SERIES Handbuch

D-Link

D-Link DGS-1210-28FL Bedienungsanleitung

D-Link

D-Link DWS-3160 Series Bedienungsanleitung

D-Link

D-Link DES-3828 - xStack Switch - Stackable Bedienungsanleitung

D-Link

D-Link DGS-3024 Bedienungsanleitung

D-Link

D-Link DGS-1008T Bedienungsanleitung

D-Link

D-Link DES-3208 Bedienungsanleitung

D-Link

D-Link DSS-100E-9P Bedienungsanleitung

D-Link

D-Link DIS-100G-5PSW Bedienungsanleitung

D-Link

D-Link xStack DGS-3120-48PC Bedienungsanleitung

D-Link

D-Link mydlink DCH-G022 Bedienungsanleitung

D-Link

D-Link xStack DGS-3200 Series Handbuch

D-Link

D-Link DGS-1024C Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung