D-Link DES-3225G Series Service-Handbuch

D-Link(Europe) Ltd.

D-Link House

6 Garland Road

Stanmore

London HA7 1DP

U.K.

Web server: http://www.dlink.co.uk Tel: +44-(0)20-82355555

FTP server: ftp://ftp.dlink.co.uk/pub Fax: +44-(0)20-82355500

All trademarks acknowledged Page: 1

TECHNICAL BULLETIN

How to update the DES-3225G firmware

The firmware consists of the PROM code and the runtime code. PROM code is

necessary for device boot up, self test. The runtime code takes over for normal

operations of the switch. You have to update the files one at a time. Normally, the

PROM code first followed by the runtime code.

Other things you would need:

•TFTP server

•Console cable – included with the DES-3225G

•PC running terminal software

Using the D-Link TFTP utility

The switch would need a TFTP server for the firmware upgrade process. To simplify things, this is just a PC

running a TFTP server utility where the switch can get the files from. If you have D-View software, there is a

TFTP server feature that you can use. Otherwise, you can obtain a TFTP server utility from your local D-Link

support office. You must be able to ping the switch from this PC before proceeding.

Just run the TFTPSRV.EXE program and the TFTP server window will come up as below. You don’t have to do

anything else. Just make sure that you can ping the switch from the PC running TFTP server and you have

nothing else to configure.

When the switch starts the upgrade process, you will see the file being transferred in one of the lines in the

TFTPSRV window.

D-Link(Europe) Ltd.

D-Link House

6 Garland Road

Stanmore

London HA7 1DP

U.K.

Web server: http://www.dlink.co.uk Tel: +44-(0)20-82355555

FTP server: ftp://ftp.dlink.co.uk/pub Fax: +44-(0)20-82355500

All trademarks acknowledged Page: 2

TECHNICAL BULLETIN

Updating the PROM code

•You would need a CFG file that specifies the physical location of the firmware files on the PC running TFTP

server. There is a provided sample CFG file. Modify the CFG file to match the actual locations of the

firmware files on your PC. You need to specify the complete directory path and image file name.

•The most important lines are highlighted in bold blue color above. You can also specify the TCPIP settings

of the switch after resetting it just to make sure you will be able to communicate with it using TCPIP. The

switch will retain the current IP settings after the upgrade.

•Enable your TFTP server following the instructions from the first page.

•Enter the console of menu of the switch (manual describes how). Select Update Firmware and

Configuration Filesfrom the main menu. Set the options as follows:

•Make sure you put in the correct TFTP server address and the location of the CFG file. Select the option

RESET SWITCH TO START UPDATE. Follow the instructions.

Code_type=PROM

Image_file="d:\des3225g\3225prom.219"

#Code_type=RUNTIME

#Image_file="d:\des3225g\3225_run.218"

#Code_type=CONFIG

#Image_file="g:\d-link\des-32~1\basic_25.bc"

#specify IP address

#Ip_addr = 10.9.68.25

# specify subnet mask

#Subnet_mask = 255.0.0.0

#specify default gateway

#Default_gateway = 10.254.254.254

D-Link(Europe) Ltd.

D-Link House

6 Garland Road

Stanmore

London HA7 1DP

U.K.

Web server: http://www.dlink.co.uk Tel: +44-(0)20-82355555

FTP server: ftp://ftp.dlink.co.uk/pub Fax: +44-(0)20-82355500

All trademarks acknowledged Page: 3

TECHNICAL BULLETIN

Updating the Runtime code

•Same as with updating the PROM code, you would need the CFG file again but this time make sure that

you put a # symbol to comment out the PROM lines and remove the # symbol from the RUNTIME lines as

shown below.

•Enable the TFTP server, exactly the same as the procedure for updating the PROM.

~ End of document ~

#Code_type=PROM

#Image_file="d:\des3225g\3225prom.219"

Code_type=RUNTIME

Image_file="d:\des3225g\3225_run.218"

#Code_type=CONFIG

#Image_file="g:\d-link\des-32~1\basic_25.bc"

#specify IP address

#Ip_addr = 10.9.68.25

# specify subnet mask

#Subnet_mask = 255.0.0.0

#specify default gateway

#Default_gateway = 10.254.254.254

Andere Handbücher für DES-3225G Series

Inhaltsverzeichnis

Andere D-Link Schalten Handbücher

D-Link

D-Link DGS-3100-24 Bedienungsanleitung

D-Link

D-Link DGS-1008P Bedienungsanleitung

D-Link

D-Link DES-1005P Bedienungsanleitung

D-Link

D-Link KVM-222 Bedienungsanleitung

D-Link

D-Link DGS-3024 Bedienungsanleitung

D-Link

D-Link DGS-F1018P-E Bedienungsanleitung

D-Link

D-Link DKVM-2U Bedienungsanleitung

D-Link

D-Link EasySmart DGS-1100-08 Bedienungsanleitung

D-Link

D-Link DES-3624i Bedienungsanleitung

D-Link

D-Link DIS-100G-5SW Bedienungsanleitung

D-Link

D-Link GO-SW-5GE Bedienungsanleitung

D-Link

D-Link DU-H3ETX Bedienungsanleitung

D-Link

D-Link DES-1108 - Switch Bedienungsanleitung

D-Link

D-Link DES-1008E Bedienungsanleitung

D-Link

D-Link DES-1008E Bedienungsanleitung

D-Link

D-Link xStack Bedienungsanleitung

D-Link

D-Link DES-7200 Handbuch

D-Link

D-Link xStack DGS-3200 Series Bedienungsanleitung

D-Link

D-Link DES-1252 - Web Smart Switch Bedienungsanleitung

D-Link

D-Link DGS-3420-28TC Bedienungsanleitung

D-Link

D-Link DKVM-8E Bedienungsanleitung

D-Link

D-Link DGS-1224T - Web Smart Switch Bedienungsanleitung

D-Link

D-Link DES-1016D - Switch Bedienungsanleitung

D-Link

D-Link xStack DGS-3620 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung