D-Link AC5300 Bedienungsanleitung

If any of the above items are missing, please contact your reseller.

DIR-895L AC5300 Ultra Wi-Fi Router

Power Adapter

Ethernet Cable

Network Requirements:

Web-based Conguration Requirements

mydlink Requirements

• For mydlink and mydlink app requirements refer to: http://www.mydlink.com

Package Contents

Minimum Requirements

• An Ethernet-based broadband modem

Computer with the following:

• Windows® or Mac OS® X operating system

• An installed Ethernet adapter or wireless adapter

• Internet Explorer® 9 or higher, Safari® 5.1 or higher, Firefox® or Chrome™

Wi-Fi Conguration Card

Quick Install Guide

45°

The DIR-895L is designed to give you the fastest, most stable network connection

possible. In order to maximize performance, orient the antennas at an angle, point-

ing outward and away from the base unit.

Antenna Orientation

Hardware Overview

1USB 3.0 Port Connect a USB 3.0 ash drive or external hard drive to share content

throughout your network.

2USB 2.0 Port Connect a USB 2.0 ash drive or external hard drive to share content

throughout your network.

3Reset Button Press and hold the reset button with a paper clip for six seconds to reset the

router to the factory default settings.

4WPS Button Press to start the WPS process. Both wireless LEDs will start to blink.

5LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and game consoles.

6Internet Port Connect your broadband modem to this port using an Ethernet cable.

7Power Button Press to power the router on and o.

8Power Port Connect the supplied power adapter.

9Mode Switch

Select Router (left) or Extender mode (right). To change modes, move

the switch to the desired position and after ve seconds the router

will reboot into the desired mode. Router is the default mode. For

information on how to use the router in Extender mode, refer to the

user manual located at http://support.dlink.com.

123 4 5 6 7 8

1Power LED

A solid white light indicates a proper connection

to the power supply. The light will be solid orange

during boot-up.

2Internet LED

A solid white light indicates a connection to the

Internet port. If the LED is orange, the connection is

good but the router cannot connect to the Internet.

32.4GHz Wireless

LED

A solid light indicates the 2.4GHz wireless function is

working properly. During the WPS process, this light

will blink.

45GHz Wireless

LED

A solid light indicates the 5GHz wireless function is

working properly. During the WPS process, this light

will blink.

5USB 2.0 A solid light indicates a USB 2.0 device is connected.

6USB 3.0 A solid light indicates a USB 3.0 device is connected.

LED Behavior

• Users with DSL providers - If you are using a PPPoE connection, you will need

your PPPoE user name and password. If you do not have this information, contact

your Internet provider. Do not proceed until you have this information.

• Users with Cable providers - Make sure you unplug the power to your modem.

In some cases, you may need to turn it o for up to ve minutes.

•Advanced Users - If your ISP provided you with a modem/router combo, you will

need to set it to “bridge” mode so the DIR-895L router can work properly. Please

contact your ISP or refer to the user manual for your modem/router device.

Before You Start

1Attach the eight antennas to the router by twisting them on clockwise.

Connect your Router

Note: If you experience issues registering this device with your mydlink account, or if you

purchased an open box or resold unit, perform a hard reset by pressing and holding the reset

button on the device for 10 seconds while the device is powered on. If you are returning the

device, please perform the hard reset procedure to clear the device of any personal data.

2Unplug the power to your DSL or Cable modem.

Modem

1 2 3 4 EthernetUSB 3.0 USB2.0 RESET WPS POWER DCIN

Router

Extender

4Connect another Ethernet cable from the Ethernet port on your computer

to one of the LAN ports on the router.You can also connect wirelessly to the

router with your computer. Use the supplied Wi-Fi Conguration Card for

the Wi-Fi network name (SSID) and Wi-Fi password of the router. Complete

steps 5 and 6 before attempting to connect.

3Unplug the power to your DSL or Cable modem. Connect an Ethernet

cable from the Internet port of the router to the Ethernet port on your

DSL or Cable modem.

1 2 3 4 EthernetUSB 3.0 USB2.0 RESET WPS POWER DC IN

Router

Extender

Modem

DIR-895L

Ethernet Port

Ethernet Cable Internet Port (yellow)

DIR-895L

Computer

Ethernet Cable

1 2 3 4 EthernetUSB 3.0 USB2.0 RESET WPS POWER DCIN

Router

Extender

5Plug the power back into your DSL or cable modem. Please wait about one

minute before continuing.

Modem

DIR-895L

Computer

Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari)

and enter http://dlinkrouter.local./ or enter the IP address of the router

(192.168.0.1).

Conguration

There are two ways to congure your router:

A. Web Browser - Use a web browser from your computer.

B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app.

Refer to the QRS Mobile Setup section for more information.

A. Web Browser Conguration

7After the router has powered up, verify that the Power (white) and Internet

(orange or white) LEDs are both lit. Proceed with router conguration.

6Plug the power adapter into your router and connect to an available power

outlet or surge protector. If the Power LED does not light up, press the

Power button on the back of the router.

1 2 3 4 INTERNET 12V --1.5A POWER WPS

Wireless

Computer*

* If you are connecting wirelessly, you may now connect to the router using the supplied

Wi-Fi Conguration Card for the Wi-Fi network name (SSID) and Wi-Fi password.

1 2 3 4 EthernetUSB 3.0 USB2.0 RESET WPS POWER DCIN

Router

Extender

12V

POWER

USB

Modem

Computer

DIR-895L

Select a language and click Next to continue.

The router may automatically detect your Internet connection type. If this

happens, skip to step 6. If not, then select your Internet connection type and

click Next to continue.

DSL (PPPoE) users enter your PPPoE user name and password supplied by

your ISP (Internet Service Provider). Click Next and skip to step 6.

For both the 2.4GHz and 5GHz bands, create a name for your Wi-Fi Network

and a password. Your wireless devices (i.e., tablets, smartphones, and

laptops) will need to have this information entered to be able to connect to

your wireless network. Click Next to continue.

Continue with the Setup Wizard to nish conguring your DIR-895L router.

When you see the summary screen, make a note of your settings.

Note: Setting up “mydlink” is optional and not required for the router to function.

Congratulations! You have completed the router installation.

5If you have a Static IP connection, enter the IP information and DNS settings

supplied by your ISP. Click Next to continue.

After you complete the conguration process, the Internet LED will turn

white indicating that your router is connected to the Internet.

1Scan the code below or search “QRS Mobile” (App Store or Google Play) to

download the QRS Mobile App to your iPhone, iPad, or Android device.

Once your app is installed, you may now congure your router. Connect to

the router wirelessly by going to your wireless utility on your device. Scan

for the wireless network name as listed on the suppliedWi-Fi Conguration

card/sticker. Select the network and then enter the Wi-Fi Password.

Once you connect to the router, tap on the QRS Mobile icon from your

mobile device, then tap Start to continue. Follow the on-screen instructions

to complete the setup.

B. QRS Mobile Setup

After the Setup Complete screen appears, click Save and write down the

new Wi-Fi Network name and password on your companion card for future

reference.

Note: To reconnect to your router, launch your wireless utility, select the new

Wi-Fi Network you created, and then enter your new Wi-Fi password.

iOS Android QRS Mobile App

Wi-Fi Name(SSID) 2.4Ghz:

dlink-xxxx

Wi-Fi Name(SSID) 5GHz:

dlink-xxxx-5GHz

Password: xxxxxxxx

To congure your router, go to:

http://dlinkrouter.local.

Or http://192.168.0.1

Username: “Admin”

Password:”“ (leave the eld blank)

How do I connect my wireless devices to the DIR-895L router?

1. Open your wireless network utility that displays available wireless networks.

2. Select the Wi-Fi Network name you assigned in the wizard and connect.

Note: If you did not run the setup wizard or you reset the router to its default

settings, refer to the Wi-Fi Conguration Card included for the default Wi-Fi

Network Name and Wi-Fi Password.

You can also connect wireless devices to the DIR-895L router using WPS:

1. Press the WPS button on the DIR-895L for a minimum of three seconds.

2. Within one minute press the WPS button on your wireless device.

3. Allow up to two minutes to connect.

Note: Some devices may require you to log in to a utility to start the WPS process.

Refer to the user manual of the device you want to connect to the router if you do

not know how to start the WPS process.

How do I change the wireless settings on the DIR-895L router?

1. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and

enter http://dlinkrouter.local./. You can also enter the IP address of the

router (192.168.0.1).

2. At the login screen, enter the router password you created in the wizard (the

password is blank by default).

3. From the navigation bar at the top of the Home page, go to Settings >

Wireless to create a new Wi-Fi network name (SSID) and Wi-Fi password.

Troubleshooting

What can I do if I forget my password?

If you forget your password, you must reset your router. Unfortunately, this

process will change all your settings back to factory default.

To reset the router, locate the reset button (hole) on the bottom of the unit.

With the router powered on, use an unfolded paper clip to press and hold the

button down for about 10 seconds. Release the button and the router will go

through its reboot process. Wait about 30 seconds to access the router.

Documentation available at http://www.dlink.com/DIR-895L.

Inhaltsverzeichnis

Andere D-Link WLAN-Router Handbücher

D-Link

D-Link DSR-1000AC Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

D-Link

D-Link DIR-280 Bedienungsanleitung

D-Link

D-Link DIR-818LW Bedienungsanleitung

D-Link

D-Link DIR-632 Bedienungsanleitung

D-Link

D-Link DIR-1750 Bedienungsanleitung

D-Link

D-Link DSL-G624T Bedienungsanleitung

D-Link

D-Link 515337 Bedienungsanleitung

D-Link

D-Link DIR-816L Bedienungsanleitung

D-Link

D-Link DWR-720 Bedienungsanleitung

D-Link

D-Link PowerLine AV2 1000 Bedienungsanleitung

D-Link

D-Link DWR-921 Bedienungsanleitung

D-Link

D-Link DIR-836L Bedienungsanleitung

D-Link

D-Link DWR-932 Bedienungsanleitung

D-Link

D-Link AC750 Bedienungsanleitung

D-Link

D-Link EXO DIR-X6060 Bedienungsanleitung

D-Link

D-Link DVA-G3671B Bedienungsanleitung

D-Link

D-Link Ethernet Broadband Router DIR-100 Bedienungsanleitung

D-Link

D-Link DGL-4100 - GamerLounge Broadband Gigabit Gaming... Bedienungsanleitung

D-Link

D-Link DSL-2750U Bedienungsanleitung

D-Link

D-Link DIR-X1860 Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

D-Link

D-Link WBR-1310 - Wireless G Router Bedienungsanleitung

D-Link

D-Link DIR-905L Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung