D-Link DI-524 - AirPlus G Wireless Router Bedienungsanleitung

This product can be set up using

any current web browser:

Internet Explorer 6 or Netscape

Navigator 7

DI-524

AirPlus G

802.11g/2.4GHz

Wireless Router

7.5V 1.5A DC Power Adapter

holders. Software and speciﬁcations subject to change without notice.

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with

other computers, you must have either an Ethernet-based Cable or DSL modem

with an established Internet account from an Internet Service Provider (ISP).

2. It’s best to use the same computer that is connected to your modem for conﬁguring

the DI-524 AirPlus G Wireless Router. The DI-524 acts as a DHCP server and will

assign all the necessary IP address information on your network. See Appendix

at the end of this Quick Installation Guide or the Manual on the CD-ROM for

setting each network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-524 AirPlus G

802.11g/2.4GHz Wireless

Router

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight Through) Cable

Using a power

supply with a different

voltage rating will

damage and void the

warranty of this product.

If any of the above items are missing, please contact your reseller.

Connecting The DI-524 Wireless

Router To Your Network

A. Receptor for

Power Adapter.

Reset Button

Pressing this button restores the Router to its original

factory default settings.

First, connect the power adapter to the receptor at the back panel of the

DI-524 and then plug the other end of the power adapter to a wall outlet or power strip.

The Power LED lights up indicating proper operation.

B. 1. Power off your Cable or DSL modem; devices that do not have a on/off switch and

will require you to unplug the power adapter. Now, the DI-524 should be powered on

and the Cable / DSL modem should be turned off.

Cable / DSL modem (Power Off) – DI-524 (Power On)

2. Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL modem.

After the Ethernet cable is securely connected, power on the Cable / DSL modem by

turning on the unit or plugging in the power adapter.

Cable / DSL modem (Power On) – DI-524 (Power On)

3. Insert the other end of the Ethernet cable to the WAN PORT on the back panel of

the DI-524. The WAN LED light will illuminate to indicate proper connection. If the WAN

LED is not illuminated, please go back to step B1 and repeat the steps.

C. Insert an Ethernet cable to LAN Port 1 on the back panel of the DI-524 and an

available Ethernet port on the network adapter in the computer you are using to

conﬁgure the DI-524. The LED light for LAN Port 1 illuminates to indicate proper

connection. (Note: The LAN Ports on the DI-524 are Auto-MDI/MDI-X. Meaning you

can use a straight-through or crossover-Ethernet cable in the LAN Ports.)

D. Computers equipped with 802.11g wireless adapters will be able to connect to the DI-

524. The DWL-630 AirPlus G Wireless Cardbus Adapter and the DWL-510 AirPlus G

Wireless PCI Adapter will be able to connect out of the box with the router using their

default wireless settings.

B. WAN PORT

This is for the connection

of an Ethernet cable to the

Cable or DSL modem.

D. Antenna

Used to

wirelessly

connect to

802.11g or

802.11b

adapters.

C. LAN PORTS

These are the

connections for Ethernet

cables to Ethernet

enabled computers.

Restart Your Computer

Connecting Additional Computers

To The DI-524

LOCAL NETWORK LEDs – a

solid light on the port indicates

a connection to an Ethernet

enabled computer on ports 1-4.

This LED blinks during data

transmission.

Power LED – a solid

light indicates a proper

connection to the power

supply.

Status LED – a blinking light

indicates that the DI-524 is

functioning properly.

When you have completed the steps in this Quick Installation Guide, your connected

network should look similar to this:

Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped

computers to the remaining Ethernet LAN ports on the back panel of the DI-524.

WAN LED – a solid light

indicates connection

on the WAN port. This

LED blinks during data

transmission.

WLAN LED – a solid light

indicates that the wireless

segment is ready. This LED

blinks during wireless data

transmission.

Once you have logged in, the

Home screen will appear.

Click Run Wizard

Using The Setup Wizard

The logon pop-up screen will appear.

Open your Web browser and

type “http://192.168.0.1” into the

URL address box. Then press the

Enter or Return key.

Type “admin” for the username and

leave the password ﬁeld blank.

Click OK

The Setup Wizard (continued)

You will see the following screens:

Set up your new password.

You have the option to establish

a password.

Click Next

Choose your time zone from

the drop down list.

Click Next

If you selected Dynamic IP

Address, this screen will appear:

(Used mainly for Cable Internet

service.)

Click the “Clone MAC Address”

button to automatically copy the

MAC address of the network

adapter in your computer. You

can also manually type in the

MAC address.

The Setup Wizard (continued)

Select your Internet Connection.

You will be prompted to select the

type of Internet connection for your

router.

If you are unsure of which setting

to select, please contact your Internet

Service Provider.

Click Next

This setup should be done on

the computer that is registered

on the ISP’s network.

Please continue to Wireless Setup.

A this point, the setup wizard will try to

auto-detect your Internet connection

type. If you have a Dynamic or

PPPoE connection, you will be

brought to the corresponding page.

Otherwise, you will see the following screen:

The Setup Wizard (continued)

If your ISP requires a Static IP

Address, and this option is selected,

then this screen will appear:

Enter the IP address information

originally provided to you by your

ISP. You will need to complete all

the required ﬁelds.

Click Next

Please continue to Wireless Setup.

If your ISP uses PPPoE (Point-to-

Point Protocol over Ethernet), and

this option is selected, then this

screen will appear: (Used mainly

for DSL Internet service.)

Please be sure to remove any

existing PPPoE client software

installed on your computers.

Enter in the username and password

provided to you by your ISP.

Please continue to Wireless Setup.

Click Next

If you wish to use encryption for

your 802.11g network, the DI-524

is capable of two levels of wireless

encryption - 64-bit and 128-bit.

By default the encryption is

disabled. You can change the

encryption settings for more secure

wireless communication.

The Setup Wizard (continued)

The default wireless settings for

your 802.11g wireless network are:

SSID = default

Channel = 6

You can change these settings to

match an existing wireless network.

Click Next

Wireless Setup

Your Setup is Complete!

Click Continue

Test Internet Connection

You will be returned to the Home tab.

For additional settings or information,

refer to the Advanced, Tools, or

Status tabs on the web-management

interface; or to the Manual located on

the CD.

Then relaunch your Web browser

(i.e., Internet Explorer or Netscape

Navigator), to link to your favorite Web

site to test your Internet connection.

Click to Exit

Click Restart

To connect to the network, make sure the

network adapter in your computer is conﬁgured

properly. Here’s how to conﬁgure the network

adapter to obtain an IP address automatically

for the DI-524 Wireless Broadband Router.

APPENDIX

Restart your computer (if necessary)

Click OK

Select Obtain an IP address

automatically

Click Internet Protocol (TCP/IP)

Click Properties

For Microsoft Windows XP:

right click on My Network Places icon

on the desktop > select Properties >

Double-click on the Network Connection

associated with the Ethernet adapter (i.e.,

D-Link DFE-530TX+).

Andere Handbücher für DI-524 - AirPlus G Wireless Router

Inhaltsverzeichnis

Andere D-Link WLAN-Router Handbücher

D-Link

D-Link Ethernet Broadband Router DIR-100 Bedienungsanleitung

D-Link

D-Link COVR-2202 Bedienungsanleitung

D-Link

D-Link E15 Bedienungsanleitung

D-Link

D-Link DI-804HV - Express ENwork Router Bedienungsanleitung

D-Link

D-Link DI-724GU - Wireless 108G QoS Gigabit Office... Bedienungsanleitung

D-Link

D-Link DWR-932C Bedienungsanleitung

D-Link

D-Link Q.NET-WLAN655 Bedienungsanleitung

D-Link

D-Link DIR-895L Gebrauchsanweisung

D-Link

D-Link DSL-2750E Handbuch

D-Link

D-Link DSP-W115 Bedienungsanleitung

D-Link

D-Link DSL-2642B Installations- und Benutzerhandbuch

D-Link

D-Link DSL-2750U Bedienungsanleitung

D-Link

D-Link DIR-652 Bedienungsanleitung

D-Link

D-Link DIR-815 Bedienungsanleitung

D-Link

D-Link AirPlus DI-614+ Bedienungsanleitung

D-Link

D-Link AC3200 Ultra Bedienungsanleitung

D-Link

D-Link DIR-330 - Wireless G VPN Router Bedienungsanleitung

D-Link

D-Link DWM-321D Bedienungsanleitung

D-Link

D-Link DSL-2740B Bedienungsanleitung

D-Link

D-Link Verizon DSL-2750B Bedienungsanleitung

D-Link

D-Link DAS-3248 Bedienungsanleitung

D-Link

D-Link DIR-605L Bedienungsanleitung

D-Link

D-Link DIR-665 Bedienungsanleitung

D-Link

D-Link DSL-2750E Einrichtungshandbuch

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung

BlueBOLT

BlueBOLT BB-ZB1 Bedienungsanleitung