D-MAX DCC-500D Bedienungsanleitung

High Resolution / Day&Night

COLOR DOME TYPE CAMERA

680 TVL, 960H

MANUAL

The lightning flash with an arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of uninsulated

dangerous voltage within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

INFORMATION - This equipment has been tested and found to comply with limits for

a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

WARNING - Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should

conform to all local codes

The camera needs periodic inspection.

Contact an authorized technician for inspection.

Stop using your camera when you find a malfunction.

If you use your camera around smoke or unusual heat for a long time,

fire may be caused.

Do not Install the camera on a surface that can not support it.

Unless the surface is suitable, it could cause falling or other hazards.

Do not hold plug with wet hands.

It could cause an electric shock.

Do not disassemble the camera.

It may result in fire, electric shock or other hazards.

Do not use the camera close to a gas or oil leak.

It may result in fire or other hazards.

■Warning

Only use the camera under conditions

where temperatures are between

-10°C and +50°C. Be especially

careful to provide ventilation when

operating under high temperatures.

It can cause the image quality to be

poor.

Severe lighting change or flicker can

cause the camera to work improperly.

It is one of the most important parts of

the camera. Be careful not to be stained

by fingerprint.

If it gets wet, wipe it dry immediately.

Liquids can contain minerals that

corrode the electronic components.

If it is exposed to radioactivity,

For heated CCD, it will be out of order.

It can damage the CCD.

It can cause malfunctions to occur.

■Precautions

1.Features

---------------------------------

2. Cable Connection & OSD Control

---------------------------------

3. Setup Menu Operation

---------------------------------

4. Troubleshooting

---------------------------------

5. Dimensions

---------------------------------

6. Specifications

---------------------------------

■Contents

☺Ultra High Resolution 680 TV Lines

Clear image quality has been achieved by employing a double-speed SONY CCD

with 960H, which provides a horizontal resolution of 680 TV lines.

☺Excellent Sensitivity

The built-in high sensitivity COLOR CCD enable a clear image even in 0.1Lux (color),

0.00001Lux (Sens-Up) or lower illumination.

☺Electrical Day & Night

The camera identifies whether it is day or night and automatically switches to the

appropriate mode, depending on its environment. By day, the camera switches to

color mode in order to maintain optimal color. At night, it switches to B/W mode so as

to obtain better picture definition.

☺F-DNR(Defog)

This camera supports Defog function which does a process of clearing blurred image

caused by fog and snow by analyzing the brightness of input image and

compensating Color of the image.

☺Coaxial cable communication(UTC)

This is a remote control function that uses the coaxial cable with the control signal.

And this helps you control the camera’s condition what you want without additional

cabling in installation or repair.

☺White Defect restoration

When the camera has white defect in the CCD with ages, User can restore it.

☺D-WDR Built-in Digital WDR

☺SMART 3D-DNR

The high performance New DSP chip dramatically reduces the gain noise in digital

image processing, producing clear, sharp images in low lighting environment.

Especially It will be operate 3D DNR mode before happening motion, but if there is

motion, it will be change smart 3D DNR mode.

☺Controlled by OSD Menu

The camera can be controlled by selecting text displayed on the monitor screen.

☺Additional Functions

HSBLC, DIS, OSD, FREEZE, Mirror(H,V-FLIP,ROTATE), D-ZOOM, Negative Image,

Sharpness, Motion Detection, Privacy functions.

IN CASE IR CAMERA

☺Smart IR

If IR indicator turns on, this camera switches to IR mode for preventing an object

1. Features

from being too bright, which helps you identity the object in near distance.

☺Visibility: 30m

In B/W mode , the IR indicator turns on with the effective visibility of 30m at 0 Lux

Cable Connection

2. Cable Connection

•Menu Structure

LENS

DC / VIDEO / MANUAL

EXPOSURE

SHUTTER

AUTO / FLK / MANUAL / 1/60

AGC

LOW / MIDDLE / HIGH / OFF

SENSE-UP

AUTO / OFF

RETURN

BACK LIGHT

OFF / DWDR / BLC / HSBLC

WHITE BAL

ATW / AWB / AWC-SET / MANUAL

DAY & NIGHT

AUTO / EXT / NIGHT / COLOR

SMART 3DNR

OFF / ON

F-DNR

OFF / MANUAL / AUTO

FUNCTION

MOTION

OFF / ON

PRIVACY

OFF / ON

D-EFFECT

D-ZOOM / SAMART ZOOM / DIS / PIP /

FREEZE / MIRROR / NEG. IMAGE

IMAGE ADJ

SHARPNESS / MONITOR / LENS

SHADING

/ DEFECT

COMM ADJ

CAM TITLE

SYNC

LANGUAGE

RETURN

EXIT

SAVE / CANCEL / RESET

①Please press the SETUP button Settings can now be made. The SETUP menu is

displayed on the monitor.

②Please select any function you wish to activate by using the UP and DOWN

buttons.

- The arrow can be moved up or down by using the UP and DOWN buttons.

- Please position the arrow to point to the function you wish to operate.

3. Setup Menu Operation

③Please press the LEFT or RIGHT button if you wish to change mode.

When the LEFT or RIGHT button is pressed, available values and modes are

displayed in order. Please keep pressing the button until you get to the mode you

wish to operate.

④Please select 'EXIT' and then press the SETUP button to finish the setting.

Note)

• If arrow appears at the mode you wish to operate, it means that there is a sub-

menu which can be selected by pressing the SETUP button.

• If arrow appears at the mode item, it means that there is no mode available to be

selected.

1. LENS

This function is used to select the type of lens.

DC: Select this mode in case of using DC type lens and control brightness value at

the sub-menu.

▶BRIGHTNESS: Adjust the screen brightness

▶IRIS SPEED: Adjust iris speed

MANUAL: Select this mode in case of using manual lens and control brightness

value at the submenu.

▶BRIGHTNESS: Adjust the screen brightness

VIDEO: Select this mode in case of using Video lens.

2. EXPOSURE

This function is used to adjust EXPOSURE

Select any function you

wish to operate by using

the UP and DOWN

buttons.

Modes can be changed

using the LEFT and

RIGHT buttons.

MAIN MENU

1. LENS DC↙

2. EXPOSURE ↙

3. BACK LIGHT OFF

4. WHITE BAL ATW

5. DAY NIGHT AUTO

6. SMART 3DNR OFF

7. F-DNR OFF

8. FUNCTION ↙

9. EXIT ↙

DC LENS

▶1. BRIGHTNESS IIIIIIIIIII 1~100

2. IRIS SPEED IIIIIIIIIIIII 1~5

RETURN RET↙

DC LENS

▶1. BRIGHTNESS IIIIIIIIIII 1~100

RETURN RET↙

Andere Handbücher für DCC-500D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere D-MAX Sicherheitskamera Handbücher

D-MAX

D-MAX DMS-200 Bedienungsanleitung

D-MAX

D-MAX DSC-737SE Bedienungsanleitung

D-MAX

D-MAX DCC-500DV Bedienungsanleitung

D-MAX

D-MAX Superior Speed Dome Betriebsanleitung

D-MAX

D-MAX DMC Series Bedienungsanleitung

D-MAX

D-MAX DCC-500F Bedienungsanleitung

D-MAX

D-MAX DCC-601DV Bedienungsanleitung

D-MAX

D-MAX DCC-700d Series Bedienungsanleitung

D-MAX

D-MAX DCC 600d Series Bedienungsanleitung

D-MAX

D-MAX DCC-500D Bedienungsanleitung

D-MAX

D-MAX DCC-520DV Bedienungsanleitung

D-MAX

D-MAX DCC-520D series Bedienungsanleitung

D-MAX

D-MAX 650 TVL Bedienungsanleitung

D-MAX

D-MAX DWC-540PV Bedienungsanleitung

D-MAX

D-MAX DIC-7030DV Bedienungsanleitung

D-MAX

D-MAX DWC-548DV Bedienungsanleitung

D-MAX

D-MAX DSC-300SE Bedienungsanleitung

D-MAX

D-MAX 600 TVL Bedienungsanleitung

D-MAX

D-MAX DCC-520DV Bedienungsanleitung

D-MAX

D-MAX DCC-708DV Bedienungsanleitung

D-MAX

D-MAX Pixim Seawolf DSP Bedienungsanleitung

D-MAX

D-MAX DSC-230SI Bedienungsanleitung

D-MAX

D-MAX DCC-501DV Bedienungsanleitung

D-MAX

D-MAX DHC-10SITA Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung