Daewoo DWB-122CH Bedienungsanleitung

TABLE OF CONTENTS

1. PRECAUTION...............................................................................2

2. GENERAL SPECIFICATIONS ................................................................3

3. NAMES OF MAJOR COMPONENTS .........................................................4

4. FUNCTION OF MAIN COMPONENTS ........................................................5

5. GENERAL INFORMATIONS .................................................................7

6. CARE AND MAINTENANCE .................................................................9

7. ELECTRICAL REQUIREMENTS ............................................................10

8. DESCRIPTION OF FUNCTIONS ............................................................11

9. WIRING DIAGRAM.........................................................................12

10. REFRIGERANT CYCLE ...................................................................13

11. PCB DRIVING DESCRIPTION .............................................................14

12. TROUBLE SHOOTING GUIDE.............................................................16

13. HOW TO DISASSEMBLE..................................................................19

14. EXPLODED DIAGRAM AND PARTS LIST ..................................................20

1. PRECAUTION

Please observe the following instructions.

1. Turn off unit.

Make sure the unit is OFF and the AC cord is unplugged before repairing or servicing.

2. In case of checking the circuit unavoidably while the unit is connected with power source, be careful

not to connect with the part of electric charge.

You may cause electric shock.

3. Use of proper part if you need to replace the part, be sure to use genuine part of servicing model.

Do not repair or replace the electric contact part.

Consumer must not repair the unit, because it is dangerous.

4. Use of proper tool.

You must use the proper tool to repair the unit, and use the measuring appliance adjusted accurately.

5. Damage of electric wire and power cord when servicing.

Check electric wire and a surely replace a damage electric wire and a damage power cord.

6. Never use connecting the middle of wire, after cutting the middle of wire.

It may cause a fire and trouble.

7. Checking the insulation resistance.

After you complete the assembly of unit, surely check the insulation resistance.

Confirm that the insulation resistance of the power line and the ground terminal is over 30MΩby measuring insulation

resistance.

8. Checking the ground.

After checking the ground, servicing it completely.

9. Checking the installation.

After checking the installation, servicing it completely.

10. Care children.

When servicing, do not make the children approach the air-conditioner.

3.NAMES OF MAJOR COMPONENTS

NO PART NAME

1 AIR FILTER

2 GRILLE FRONT

3 CABINET

4 BLADE VERTICAL

5 KNOB THERMOSTAT

6 KNOB SELECTOR

NO PART NAME

7 BLADE HORIZONTAL

8 AIR VENT

9 AIR INTAKE

10 AIR DISCHARGE

11 HEATER LAMP

12 CABINET DRAIN (Attached inside of Grille Front)

4. FUNCTION OF MAIN COMPONENTS

• FAN & COOLING CONTROL

The Fan Control Selector Switch has six positions.

Choose one of the speed settings by rotating the fan control Selector Switch to the appropriate position

OFF Select this setting for stop all operation of air conditioner

FAN Select this setting for low speed air circulation without cooling and

heating.

LOW COOL Select this setting for cooling operation with LOW FAN.

HIGH COOL Select this setting for cooling operation with HIGH FAN.

LOW HEAT Select this setting for Heating operation with LOW FAN.

HIGH HEAT Select this setting for Heating operation with HIGH FAN.

• TEMPERATURE CONTROL

Choose a temperature settings by rotating the knob of thermostat to the appropriate position

• The Thermostat automatically starts and stops operation in order to keep the room

temperature at a proper level, and this results in efficient use of power and economical

cooling.

• Turn clockwise for a cooler room temperature.

• Turn counter-clockwise for a warmer room temperature.

• HEATER LAMP

When the unit sets heating operation condition, the red lamp is lighted.

When the frost settles on the heat exchanger of the outside, defrosting is made automatically and the red lamp is turned

off.

The unit may give a hiss and the fan motor stops for 1 to 10 minutes.

This should not be regarded as a problem.

After defrosting, the heating operation begins again.

NOTE

• ECONOMICAL AND COMFORTABLE USE

1. Properly control the room temperature.

2. Avoid being exposed to direct sunlight.

3. Prevent the wind from entering the room.

WARMER COOLER

HIGH

COOL

LOW

COOL

HIGH

HEAT

LOW

HEAT

FANFAN OFF

SELECTOR

WARMER COOLER

THERMOSTAT

CAUTION

When the air conditioner has been performing its cooling operation and is turned “OFF”or set to the ‘FAN”

position, wait at least 3 minutes before resetting to the cooling operation.

•MOTOR

The motor is used to rotate the indoor and outdoor fan so that the room air can be recirculated.

•FAN MOTOR

–BLOWER FAN : The Blower draws hot air from the room through the Evaporator and then discharges it back into the

cool air. It circulates the room air.

–PROPELLER FAN: The Propeller draws outdoor air through louvering and cools Condenser, and then blows the hot air out.

* Heating condition is in opposition.

•CAPACITOR

The Capacitor enlarges the difference of phase between main coil so that the Compressor and Fan Motor starts well.

•ACCUMULATOR

The Accumulator blocks the unflow of liquid refrigerant and impurities into the Compressor.

CAUTION

In order to After Service convenience that the motor is common parts with Cooling only model, (This part is not

use of medium speed function so that the lead wire’s receptacle is taping)

Because of the motor supplies of having a lead wire’s receptacle when Heat Pump model’s After Service that it

is necessary to taping of lead-wire.

5. GENERAL INFORMATIONS

•CHANGING AIR FLOW DIRECTION

Air flow deflectors divert air from center flow to left or right and up or down.

Adjust deflectors for desired air flow pattern.

•AIR FLOW AROUND UNIT

Check indoor grille and outdoor louvers for air flow obstructions. Do not block air flow to and from unit. The outdoor coil

should be checked and periodically cleaned for debris that may collect and block unit air flow. If air flow is obstructed or

deflected back into unit, the compressor may cycle on and off rapidly, causing early compressor failure.

•DRAIN HOLE AND WATER DRIPPING OUTSIDE

Locate drain hole at the rear or on the bottom of unit. Water in base pan is picked up by the fan blade and thrown onto the

warm outdoor coil where it evaporates. The air conditioner must be installed level or tilted slightly to the outside for proper

water disposal. On exceptionally hot and humid days the air conditioner may permit excess water to pass thru rear drain hole

or overflow. This should be considered normal.

•HOW TO INSTALL THE DRAIN CAP

This drain cap is not attached the rear the unit at the factory.

If you want to install the drain cap, please install the drain

cap like Fig. of the drain cap.

There are two kinds of method to install the drain cap.

The first method is that the shape of hole like

It is good for the household.

The second method is that the shape of hole is like

It is good for the shop.

•DOOR VENT

The door vent for the room air ventilation is lever type.

If the door vent lever moves to the left, then close the

vent and moves to the rght, then open the vent.

Door Vent

CLOSE VENT → OPEN

→

The rear side of the unit

Drain Cap

SEAL DRAIN

M4x8 SCREW: Use Screw(M4x8) only.

•HOW TO ATTACH CABINET DRAIN

The air conditioner employs a proper drain method whereby the condensed water (moisture removed from the air) is

drained to the outside.

In very humid weather, excessive condensate water removed from the air may cause some water to collect. To remove

this excess water you can install the cabinet drain as detailed below.

1. Take the cabinet drain which is located in the upper styrofoam pad.

2. Remove the hole rubber from the base pan bottom hole.

3. Install the cabinet drain to the left corner of the cabinet with 3 screws.

4. Connect the drain hose to the outlet located at the bottom of the cabinet drain.

You can purchase the drain hose or tubing locally to satisfy your particular needs.

(Drain hose is not supplied)

CABINET

SCREW

CABINET

DRAIN

DRAIN HOSE

CAUTION

1. Remove “the Grille Front”from the unit.

2. Find “the Cabinet Drain”which is attached on rear side of “the Grille Front”.

- If you don’t remove it. the unit cannot be operated normally.

3. Assemble “the Cabinet Drain”according to the instruction of page 5

- “How to attach cabinet drain”

Inside of Grille Front

Remove the Cabinet Drain

6. CARE AND MAINTENANCE

•AIR FILTER

Clean the air filter, which removes dust inside the room.

It should be washed at least once every week during operation.

1. Remove the Air Filter from the front grille by pulling to right.

2. Clean Air Filter with a vacuum cleaner or lukewarm, soapy water.

3. Shake it when clean to remove moisture completely. Reinstall.

•CLEANING THE AIR CONDITIONER

1. At least once a year, remove cabinet and thoroughly clean air conditioner.

Have the unit inspected by an authorized service man to ensure unit is

functioning properly.

2. Wash air conditioner with lukewarm, soapy water as needed.

Rinse and dry thoroghly.

3. If using concentrated liquid detergent, dilute in warm water first.

4. Front grille may be wiped off with a cloth dampened in a mild detergent

solution.

5. Cabinet may be washed with mild soap or detergent and lukewarm water,

then polished with liquid wax for appliances.

6. Condenser and Evaporator coils should be cleaned at the beginning of each cooling season. Use a soft brush or

vacuum cleaner to clean them, making sure that the Condenser and Evaporator coils are not damaged.

7. Do not use abrasive cleaners. These items scrach, crack and discolor surfaces.

CAUTION

To avoid death of personal injury due to electrical shock, turn fan control OFF and unplug

power cord before cleaning or performing maintenance. After cleaning or performing

maintenance, reconnect power.

NOTE

A dirty Air Filter reduces air flow and the cooling capacity.

Do not operate unit without Air Filter.

NOTE

To assure continued peak efficiency, condenser coils (weather side of unit) should be checked periodically and

cleaned if clogged with soot or dirt from the atmosphere.

7. ELECTRICAL REQUIREMENTS

•ELECTRICAL GROUNDING INSTRUCTIONS

This appliance is equipped with a three-prong(grounding) plug for protection against possible shock hazards. If a two-prong

wall receptacle is encountered, the customer is required to contact a qualified electrician and have the two-prong wall

receptacle replaced with a properly grounded three-prong wall receptacle in accordance with the National Electrical Code.

•USE OF EXTENSION CORD

Because of potential safety hazards under a certain condition we strongly recommend against the use of an extension

cord. However, if you still elect to use an extension cord, it is absolutely necessary that it is earthed and the marked

rating of the extension cord should be 250V, 10A (MIN.)

The socket-outlet shall be installed near the equipment and shall be easily accessible.

•REPLACEMENT OF SUPPLY FLEXIBLE CORD.

It the supply flexible cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified

person in order to avoid a hazard.

WARNING :

To avoid death, personal injury or properly damage due to electrical shock, this unit must be

grounded.

Do not under any circumstances cut or remove the round grounding prong from the plug.

Do not use a two prong adapter.

WARNING :

To avoid death, personal injury or properly damage due to electrical shock, do not use an

extension cord or pinch the power cord.

Do not remove the warning tag from the power cord.

CAUTION :

The appliance shall be installed in accordance with national wiring regulations.

Andere Handbücher für DWB-122CH

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Daewoo Klimaanlage Handbücher

Daewoo

Daewoo DSB-F154LH Bedienungsanleitung

Daewoo

Daewoo COL1317 Bedienungsanleitung

Daewoo

Daewoo COL1316 Bedienungsanleitung

Daewoo

Daewoo Dhome DA9KWE Bedienungsanleitung

Daewoo

Daewoo DOB-092RH Bedienungsanleitung

Daewoo

Daewoo DSB-181LH Bedienungsanleitung

Daewoo

Daewoo DWC-056CL Bauanleitung

Daewoo

Daewoo COL1579 Bedienungsanleitung

Daewoo

Daewoo DSC-1245FL Bedienungsanleitung

Daewoo

Daewoo DSC-097L Installations- und Benutzerhandbuch

Daewoo

Daewoo DWC-055RL Bedienungsanleitung

Daewoo

Daewoo DA6LWE Bedienungsanleitung

Daewoo

Daewoo DWB-122CH Bedienungsanleitung

Daewoo

Daewoo DSA-099L Bedienungsanleitung

Daewoo

Daewoo DWB-121R Bedienungsanleitung

Daewoo

Daewoo DSB-075L Bedienungsanleitung

Daewoo

Daewoo DSB-F183L Bedienungsanleitung

Daewoo

Daewoo DSB-090L Bedienungsanleitung

Daewoo

Daewoo DSB-070L Bedienungsanleitung

Daewoo

Daewoo DWC-052CAL Bedienungsanleitung

Daewoo

Daewoo DWA-182R Bedienungsanleitung

Daewoo

Daewoo DWA-182RH Bedienungsanleitung

Daewoo

Daewoo DSB-F0969GLH-V Bedienungsanleitung

Daewoo

Daewoo DTB-F071LH-DVI Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Spheros

Spheros CC 355 Bedienungsanleitung

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Bedienungsanleitung

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Samsung

Samsung AR KV Series Leitfaden

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

Hitachi

Hitachi RAS-E24CAK Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Hisense

Hisense 7K Technisches Handbuch

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung