Daewoo DWP-28W2D, DWP-28W2KD, DWP-28W2GBD, DWP-28W2FD, DWP-28W2SD, DWP-28W2, DWP-28W2K, DWP-28W2GB, DWP-28W2F,... Bedienungsanleitung

MODEL NO. : DWP-28W2D, DWP-28W2KD, DWP-28W2GBD

DWP-28W2FD, DWP-28W2SD

DWP-28W2, DWP-28W2K, DWP-28W2GB

DWP-28W2F, DWP-28W2S

Colour Television

Instruction Manual

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

ADDITIONAL INFORMATION FOR THE SET SOLD IN GREAT BRITAIN

The appliance is supplied with a moulded three pin mains plug fitted with 5Amp fuse.

Should the fuse require replacement, it must be replaced with a fuse rated at 5 amp

and approved by ASTA or BSI to BS1362.

The plug contains a removable fuse cover that must be refitted when the fuse is

replaced.In the event of the fuse cover being lost or damaged, the plug must not be

used until a replacement cover has been obtained.Replacement fuse covers can be

purchased from your nearest electrical dealer and must be the same colour as the

original.

If the moulded mains plug is unsuitable for the socket outlet in your home or is

removed for any other reasons, then the fuse should be removed and the cut off plug

disposed of safely to prevent the hazard of electric shock.

There is a danger of electric shock if the cut off plug is inserted into any socket outlet.

If a replacement plug is to be fitted, please observe the wiring code shown below.The

wires in the mains lead are coloured in the accordance with the following code:

Blue-neutral Brown-live

As the colours of the wires in the main lead of this appliance may not correspond with

the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked

with the letter N or coloured black.The wire which is coloured brown must be connected

to the terminal which is marked with the letter L or coloured red.

Do not make any connections to the terminal in the plug which is marked by the letter

E or by the safety earth symbol or coloured green or green and yellow.

CONTENT

Important safeguards...............................................3

Before Powering up..................................................4

Connecting external equipment...............................7

Daily use..................................................................9

Menu........................................................................11

Teletext....................................................................19

Identity of features on local and remote control.......5

IMPORTANT SAFEGUARDS

If the set is moved in a different direction, the MAIN POWER button must

be switched off for at least 15 minutes in order to take out colour patches

on the screen.

AFTER MOVING THE SET

Do not insert foreign objects, such as needles

and coins, in the air vents.

OBJECT ENTRY

WATER AND MOISTURE

Never install the set in the following places: In a wet basement,

bathroom. Do not place any container with liquid on the set.

HEAT

Never place the set near heat sources.

VENTILATION

Do not cover the air vents in the cabinet and never place

the set in a confined space such as bookcase or built-in furniture

unless proper ventilation is provided.

Leave a minimum 10 cm gap all around the unit.

LIGHTNING STRIKING

You should disconnect the set from the mains

and the aerial system during thunderstorms.

CLEANING

Unplug the set from the mains during cleaning.

SWITCHING ON AND OFF

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT

Insert the batteries (two 1,5V, type AAA)

Plug the mains cable into the power socket

with 240v / 50Hz AC.

When using an outdoor aerial, it is usually

connected to the set by means of 75 ohm

lead, terminated with a coaxial plug.

Switching on

Switch the set on with the MAIN POWER button, ( ON/OFF ),

and then PR UP or DOWN button on the front of the set.

Or POWER button or the UP/DOWN button

or one of the NUMBER buttons on the remote control unit.

MAINS CONNECTION

AERIAL CONNECTION

Press POWER button, ( ), on the remote control unit

to return the set to its stand by mode.

If you don’t use the set for an extended period of time,

turn it off with the MAIN POWER button on the set.

Switching off

123

456

789

0NORMAL

MADE IN KOREA

Batteries

BEFORE POWERING UP

AV1 AV2

IDENTITY OF FEATURES ON LOCALAND REMOTE CONTROL

SCART SOCKET1

AERIAL TERMINAL

Front

Back

LOCAL CONTROL

SCART SOCKET2

VIDEO LAUDIO R

VIDEO

INPUT HEAD

PHONE

AUDIO

INPUT

ON/OFF

MAIN

POWER

BUTTON

REMOTE

SENSOR STAND-BY

INDICATOR

PROGRAMME

DOWN/UP

BUTTONS

VOLUME

DOWN/UP

BUTTONS

TV / AV

BUTTON

REMOTE CONTROL UNIT

1 POWER

2 NUMBER 0-9

3 NORMAL / OK

4 TV / AV

5 PR UP (CURSOR UP)

6 VOLUME UP (CURSOR RIGHT)

7 MENU

8 PR DOWN (CURSOR DOWN)

9 VOLUME DOWN (CURSOR LEFT)

10 MUTE

11 RECALL

12 SLEEP

13 not used

14 MOVE (Edit mode only)

/ (Smart Sound Change)

15 SKIP (Edit mode only)

16 TV / TEXT

17 DELETE (Edit mode only)/ZOOM

18 MODE (Sound Mode Change)

TV mode TELETEXT mode

1 POWER

2 NUMBER 0-9

3 INDEX

4 MIX

5 PAGE UP

6 SUBPAGE

7 MENU

8 PAGE DOWN

9 HOLD

10 MUTE

11 REVEAL

12 SIZE

13 CANCEL

14 GREEN KEY

15 RED KEY

16 TEXT / TV

17 YELLOW KEY

18 CYAN KEY

123

456

789

NORMAL/OK

SLEEP RECALL

DELETE/ZOOM

SKIP MOVE/

MODE

R-40A13

SCART JACK 1 (AV1) :

This is used to connect a VCR,

a PERI-TV decoder,a Camcorder or a video

game console . In most cases, the set changes

automatically to AV when the VCR connected is

in display mode . If not, press the TVAV button ( )

on the remote control unit or on the front of the set .

You must turn the external equipment off or press

the TV /AV button to return to the TV mode .

CONNECTING THE EXTERNAL EQUIPMENT

TV and AV

Use the TV /AV button ( ) on the remote control unit or on the front of the set to select one of the

three options. Whenever the TV /AV button ( ) is pressed, the on-screen display will be

changed as shown: AV1 AV2 S-VHS TV

SCART JACK 2 (AV2) :

This is used to connect a VCR,

a Camcoder or a S-VHS VCR .

You can also receive the S-VHS

signal with SCART JACK2 by selecting

S-VHS mode with AV button ( ) .

VCR

AV1

FRONTAV JACK

Connect the AV (Audio/Video) socket with an appropriate

cable to the corresponding socket of the external equipment .

Select AV mode by pressing the TV / AV button.

Press the TV /AV button to return to the TV mode .

NOTE : If two pieces of equipment are connected, one to the front AV JACK and

a second to the SCART JACK 2, you can play only one apparatus, the

second one must be switched off.

VIDEO GAME

CAMCORDER

HEADPHONE JACK

Insert the headphone plug (3,5 mm)

into the headphone socket.

The sound from the speaker will be cut off.

DAILY USE

Direct selection

PICTURE CONTROLASPECT MENU

You can choose between three picture settings,

using repeatedly the remote control NORMAL button :

- Normal I (standard hard picture)

- Normal II (standard soft picture)

- Favourite (you can adjust picture setting to your own

Preference, using the Picture menu)

For other adjustments : Brightness, contrast, colour,

sharpness, see Picture menu. (page )

The sleep function will switch

the television to stand-by

after a set period of time.

Pressing the remote control SLEEP

button repeatedely, you can enter

one of the following settings :

OFF >30 min > 60 min >

90 min >120 min >OFF

PROGRAMME SELECTION

SLEEP FUNCTION

SOUND CONTROL

Mono forcing

If you are unable to get good sound on a channel due to a poor stereo broadcasting signal,

you can change from stereo to mono transmission by pressing the remote control MODE button.

Then the programme status concerning this programme indicates "Mono" (in red colour)

For other adjustments (bass, treble, balance and sound effect) see sound menu page .

Use remote control NUMBER buttons.

For two digit programme numbers,

press the button for the second digit

within 2.5 seconds.

Up/Down moves

Use PR UP/DOWN buttons on the

remote control unit or on the front of the set.

Whenever the "ZOOM" button is pressed, the screen will be changed as shown;

Auto->16:9->Zoom->Panorama->Auto...

Inhaltsverzeichnis

Andere Daewoo Röhrenfernseher Handbücher

Daewoo

Daewoo Super Vision 14Q1 Bedienungsanleitung

Daewoo

Daewoo DUX-21U7DT Bedienungsanleitung

Daewoo

Daewoo DTQ-14V1FCN/20V1FCN Bedienungsanleitung

Daewoo

Daewoo DSC-3210EGB Benutzerhandbuch

Daewoo

Daewoo DTC-20, DTC-21, DTY-21, DTY-25 Benutzerhandbuch

Daewoo

Daewoo DTQ-20U4SC Bedienungsanleitung

Daewoo

Daewoo Super Vision 14A5 Bedienungsanleitung

Daewoo

Daewoo DTQ-26S2 FC Bedienungsanleitung

Daewoo

Daewoo D W X -28W, D W F -28W, D T F -29, D T P -25, D T P... Benutzerhandbuch

Daewoo

Daewoo DTQ-14P2/P3FCG Bedienungsanleitung

Daewoo

Daewoo DTQ 20U6SC Bedienungsanleitung

Daewoo

Daewoo GB14F8T1 Bedienungsanleitung

Beliebte Röhrenfernseher Handbücher anderer Marken

JVC

JVC AV-21QS5SP Bedienungsanleitung

Philips

Philips COLOR TV 25 INCH TABLE TR2517C Bedienungsanleitung

Hitachi

Hitachi 27CX01B Bedienungsanleitung

LG 30FZ1DC Bedienungsanleitung

Sony

Sony FD TRINITON WEGA KV-24FS120 Bedienungsanleitung

RCA

RCA F19442 Bedienungsanleitung

Samsung

Samsung CS761 Bedienungsanleitung

Philips

Philips 29PT4973 Bedienungsanleitung

Panasonic

Panasonic TC-29P100 Series Bedienungsanleitung

RCA

RCA F19422 Bedienungsanleitung

Sony

Sony WEGA KV 32HS20 Bedienungsanleitung

Samsung

Samsung SlimFit TX R3079WH Bedienungsanleitung

Palsonic

Palsonic MODEL 5179G Bedienungsanleitung

Toshiba

Toshiba CF13H22 Bedienungsanleitung

Magnavox

Magnavox MS3650C - 36" Smart Ctv Handbuch

Toshiba

Toshiba 14AF41 Bedienungsanleitung

Philips

Philips 21PT9469 Bedienungsanleitung

Mitsubishi

Mitsubishi CS-35305 Bedienungsanleitung