Philips 21PT9469 Bedienungsanleitung

www.philips.com/welcome

EN User manual

21PT9469/94

Before you connect the TV to the power

outlet, ensure that the power voltage

matches the value printed on the back

of the TV. Never connect the TV to the

power outlet if the voltage is different.

Risk of injury to children! Follow these

precautions to prevent the TV from toppling

over and causing injury to children:

Never place the TV on a surface covered

by a cloth or other material that can be

pulled away.

Ensure that no part of the TV hangs over

the edge of the surface.

Never place the TV on tall furniture (such

as a bookcase) without anchoring both

the furniture and TV to the wall or a

suitable support.

Educate children about the dangers of

climbing on furniture to reach the TV.

Risk of overheating!

Never install the TV in a conﬁned space.

Always leave a space of at least 4 inches

or 10 cm around the TV for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the TV.

Risk of injury, ﬁre or power cord damage!

Never place the TV or any objects on the

power cord.

To easily disconnect the TV power cord

from the power outlet, ensure that you

have full access to the power cord at all

times.

When you disconnect the power cord,

always pull the plug, never the cable.

Disconnect the TV from the power

outlet and antenna before lightning

storms. During lightning storms, never

touch any part of the TV, power cord or

antenna cable.

•

1 Important

Read and understand all instructions before you

use yourTV. If damage is caused by failure to

follow instructions, the warranty does not apply.

Safety

Risk of electric shock or ﬁre!

Never expose the TV to rain or water.

Never place liquid containers, such as

vases, near the TV. If liquids are spilt on

or into the TV, disconnect the TV from

the power outlet immediately. Contact

Philips Consumer Care to have the TV

checked before use.

Never place the TV, remote control or

batteries near naked ﬂames or other heat

sources, including direct sunlight.

To prevent the spread of ﬁre, keep

candles or other ﬂames away from the

TV, remote control and batteries at all

times.

Never insert objects into the ventilation

slots or other openings on the TV.

Risk of short circuit or ﬁre!

Never expose the remote control or

batteries to rain, water or excessive heat.

Avoid force coming onto power plugs.

Loose power plugs can cause arcing or

ﬁre.

Risk of injury or damage to the TV!

Two people are required to lift and carry

a TV that weighs more than 55 lbs.

If the TV is transported in temperatures

below 5°C, unpack the TV and wait

until the TV temperature matches room

temperature before connecting the TV to

the power outlet.

•

Your product contains batteries covered by

the European Directive 2006/66/EC, which

cannot be disposed with normal household

waste.

Please inform yourself about the local rules

on separate collection of batteries because

correct disposal helps to prevent negative

consequences for the environmental and

human health.

Screen care

Avoid stationary images as much as

possible. Stationary images are images

that remain on-screen for extended

periods of time. Examples include:

on-screen menus, black bars and time

displays. If you must use stationary

images, reduce screen contrast and

brightness to avoid screen damage.

Unplug the TV before cleaning.

Clean the TV and frame with a soft,

damp cloth. Never use substances such as

alcohol, chemicals or household cleaners

on the TV.

Risk of damage to the TV screen! Never

touch, push, rub or strike the screen with

any object.

To avoid deformations and colour fading,

wipe off water drops as soon as possible.

Disposal of your old product and

batteries

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

When this crossed-out wheeled bin symbol

is attached to a product it means that the

product is covered by the European Directive

2002/96/EC. Please inform yourself about the

local separate collection system for electrical

and electronic products.

Please act according to your local rules and

do not dispose of your old products with your

normal household waste.

Correct disposal of your old product helps to

prevent potential negative consequences for

the environment and human health.

•

a (Standby-On)

Switches the TV to standby if it is on.

Switches on the TV if it is in standby.

b Not used.

c INFO

Displays program information, if available.

d Not used.

e INCR. SURR

Enables Incredible Surround for stereo sources.

Enables spatial mode for mono sources.

f Not used.

g (Navigation buttons)

Navigates through the menus.

h SMART (Smart picture)

Cycles through pre-deﬁned picture

settings.

i (Mute)

Mutes or restores audio output.

j CH +/- (Channel +/-)

Switches to the next or previous channel.

k 0-9 (Numeric buttons)

Selects a channel or setting.

l A/CH (Alternate channel)

Toggles between the current channel and

the last viewed channel.

m AV

Selects connected devices.

n DUAL

Switches from Stereo to Mono.

o VOL +/- (Volume +/-)

Increases or decreases volume.

SMART (Smart Sound)

Cycles through pre-deﬁned sound

settings.

q MENU

Toggles the main menu on or off.

r Not used.

s TIMER

Sets the timers.

•

2 Your product

Congratulations on your purchase, and

welcome to Philips! To fully beneﬁt from the

support that Philips offers, register your product

at www.philips.com/welcome.

Product overview

This section gives you an overview of

commonly used controls and functions.

Remote control

Controls and indicators

a : Switches the product on or off.

b Standby indicator

c Remote control sensor

d -/+ : Increases or decreases volume.

e / : Switches to the next or previous

channel.

Back connectors

a TV ANTENNA

Signal input from an antenna, cable or

satellite.

b MONITOR OUT

Audio and video output to analog devices

such as another TV or a recording device.

VOLUME

CHANNEL

POWER

abc d e

VOLUME

CHANNEL

POWER

abc d e

c AV IN (VIDEO and AUDIO L/R)

Analog audio and video input from

analog or digital devices such as DVD

players, satellite receivers and VCRs.

d Component Video Input (YPbPr)

Video input from analog devices such

as DVD, receiver, game console, etc.This

connector is used with audio input.

Side connectors

a VIDEO IN

Composite video input from analog

devices such as VCRs.

b AUDIO IN L/R

Audio input from analog devices

connected to VIDEO IN.

Connect a video player:

Insert remote control batteries

3 Get started

This section describes how to connect various

devices with different connectors.

Connect devices

Note

Different types of connectors may be used to

connect a device to your TV, depending on

availability and your needs.

•

Connect a video recorder:

Connect a video recorder and a set-top box:

4 Install channels

Automatically install channels.

Note

Make sure the TV is in TV mode. Press AV

repeatedly until the channel number appears.

•

1Press MENU.

2 Select [INSTALL] > [AUTO STORE].

3 Press to start auto search.

4Press MENU to exit.

Manually install channels

Note

Make sure the TV is in TV mode. Press AV

repeatedly until the channel number appears.

•

1 Press MENU.

2 Select [INSTALL] > [MANUAL STORE]

> [CHANNEL].

3 Press the numeric buttons to key in the

channel number.

4Press to select [SEARCH].

5Press to start manual search.

6Press MENU to exit.

Select the colour and sound

system

1 Press MENU.

2 Select [INSTALL] > [MANUAL STORE]

> [COLOUR SYS].

3 Press to select your desired colour

system.

4Press to select [SOUND SYS].

5Press to select your desired sound

system.

6Press to exit.

Fine tune channels

1 Press MENU.

2 Select [INSTALL] > [MANUAL STORE]

> [FINE TUNE].

3 Press to adjust.

4Press to exit.

Skip or edit channels

1 Press MENU.

2 Select [INSTALL] > [MANUAL STORE]

> [SKIP].

3 Select [ON] to skip channel.

4Press to exit.

Swap channels

1 Press MENU.

2 Select [INSTALL] >[CH SWAP] >

[FROM].

3 Press or the numeric buttons to key

in the channel number.

4Press to select [TO].

5Press or the numeric buttons to key

in the channel number.

6Press to select [EXCHANGE].

7Press to exchange the progams of

the two channels.

8Press to exit.

Switch channels

Press CH +/- on the remote control or

/at the front of the TV.

Enter a channel number using the

Numeric buttons.

Watch connected devices

Use the source button

Press AV repeatedly to cycle through the

various sources.

Adjust TV volume

To increase or decrease volume

Press VOL +/-.

Press +/- at the front of the TV.

To mute or unmute sound

Press to mute the sound.

Press again to restore the sound.

•

5 Use your

product

This section helps you perform basic operations

(see ‘Use more of your product’).

Switch your TV on/off or to

standby

To switch on

If the standby indicator is off, press at

the front of the TV.

If the standby indicator is red, press on

the remote control.

To switch to standby

Press on the remote control.

The standby indicator switches to red.

To switch off

Press at the front of the TV.

The standby indicator switches off.

Tip

Though your TV consumes very little power

when in standby, energy continues to be

consumed. When not in use for an extended

period of time, disconnect the TV power cable

from the power outlet.

•

Use smart picture

Use smart picture to apply pre-deﬁned

picture settings.

1 Press SMART repeatedly to cycle

through the four settings.

[PERSONAL] Settings are set to

your preference.

[SOFT] Emphasises warm colours.

This setting is suitable for dimly lit

rooms.

[NATURAL] Emphasises original

colours.

[RICH] Emphasises very vibrant

colours. This setting is the optimal

setting when you are viewing TV

programs in brightly lit rooms.

2 Press to exit.

Manually adjust picture settings

1 Press MENU.

2 Press the navigation buttons to enter the

[PICTURE] menu.

3 Press to select from the following

settings and adjust:

[BRIGHTNESS] Adjusts the intensity

and details of dark areas.

[COLOUR] Adjusts colour

saturation.

[CONTRAST] Adjusts the intensity

of bright areas, keeping dark areas

unchanged.

[SHARPNESS] Adjusts the level of

sharpness in image details.

[COLOUR TEMP] Introduces more

orange tones or blue tones to the

picture.

[CONTRAST +] Select ON to

optimise the total contrast for

improved picture quality.

•

6 Use more of

your product

Access TV menus

Menus help you to install channels, change

picture and sound settings and access other

features.

1 Press MENU.

The menu screen appears.

2 Press the to select and navigate

through one of the following menus.

[PICTURE] Adjusts the picture

setting for optimal viewing.

[SOUND] Adjusts the sound setting.

[FEATURES] Accesses features.

[INSTALL] Selects the channel

installation menu.

3 Press MENU to return to the previous

menu.

Change picture and sound

settings

Change picture and sound settings to suit your

preferences.You can apply pre-deﬁned settings

or change settings manually.

•

CONTRAST +

BRIGHTNESS

MAIN

INSTALL

PICTURE

FEATURES

SOUND COLOUR

CONTRAST

SHARPNESS

COLOUR TEMP

CONTRAST +

BRIGHTNESS

MAIN

INSTALL

PICTURE

FEATURES

SOUND COLOUR

CONTRAST

SHARPNESS

COLOUR TEMP

3 Press to set the hour and press to

conﬁrm.

4 Press to set the minutes and press

to conﬁrm.

5 Press MENU to exit.

Set timer options

1 Press MENU.

2 Select [FEATURES] > [TIMER].

3 Press to select from the following

options and adjust:

[ON TIME] Sets the time for the TV

to turn on from standby.

[ON CHANNEL] Sets the channel

when the TV is turned on from

standby.

[OFF TIME] Sets a time for the TV

to switch off.

[SLEEP TIME] Sets a delay in

minutes after which the TV is

switched to standby.

[CH SWITCH] Sets a time for the

TV to switch to another channel.

[SWITCH TO] Sets a channel

to switch to when the TV is

programmed to switch to another

channel.

4 Press MENU to exit.

•

Use smart sound

Use smart sound to apply pre-deﬁned sound

settings.

1 Press SMART repeatedly to cycle

through the four settings.

[PERSONAL] Settings are set to

your preference.

[VOICE] Emphasises high tones

(treble boosted).

[THEATRE] Emphasises sensation to

action (bass and treble boosted).

[MUSIC] Emphasises low tones (bass

boosted).

2 Press to exit.

Adjust sound settings

1 Press MENU

2 Press the navigation buttons to enter the

[SOUND] menu.

3 Press to select from the following

settings and adjust:

[TREBLE] Adjusts the treble level.

[BASS] Adjusts the bass level.

[BALANCE] Adjusts the balance of

the right and left speakers to best

suit your listening position.

[SURROUND] Enables spatial

sound.

Use timers

You can set timers to switch the TV on or

switch to standby at a speciﬁed time.

Set the time

1 Press MENU.

2 Select [FEATURES] > [TIMER] >

[CLOCK].

•

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Röhrenfernseher Handbücher

Philips

Philips TP2781, TP3281, TP3681 Bedienungsanleitung

Philips

Philips COLOR TV 25 INCH TABLE TR2517C Bedienungsanleitung

Philips

Philips 21PT5525 Bedienungsanleitung

Philips

Philips 25PT 5106 Bedienungsanleitung

Philips

Philips 21PT3323 Bedienungsanleitung

Philips

Philips 21PT1320 Bedienungsanleitung

Philips

Philips 28PT4404/30 Bedienungsanleitung

Philips

Philips Mono FSQ 20PT1346 Bedienungsanleitung

Philips

Philips PR1309B Bedienungsanleitung

Philips

Philips HD2717C Bedienungsanleitung

Philips

Philips 25PT632A/05 Bedienungsanleitung

Philips

Philips TP3285C1 Bedienungsanleitung

Philips

Philips Matchline 32PW9515 Bedienungsanleitung

Philips

Philips PPC927C Bedienungsanleitung

Philips

Philips COLOR TV 36 INCH TABLE TS3658C Bedienungsanleitung

Philips

Philips TS2546C Bedienungsanleitung

Philips

Philips 21PT1653/58P Bedienungsanleitung

Philips

Philips 14PT2115 Bedienungsanleitung

Philips

Philips 29PT2204 Bedienungsanleitung

Philips

Philips 28PW9513 - annexe 1 Bedienungsanleitung

Philips

Philips 29PT9221/93R Bedienungsanleitung

Philips

Philips 28CL6776/33 Bedienungsanleitung

Philips

Philips 28PT7007/12 Bedienungsanleitung

Philips

Philips TA 7216 Bedienungsanleitung

Beliebte Röhrenfernseher Handbücher anderer Marken

JVC

JVC AV-21QS5SP Bedienungsanleitung

Hitachi

Hitachi 27CX01B Bedienungsanleitung

LG 30FZ1DC Bedienungsanleitung

Sony

Sony FD TRINITON WEGA KV-24FS120 Bedienungsanleitung

RCA

RCA F19442 Bedienungsanleitung

Samsung

Samsung CS761 Bedienungsanleitung

Panasonic

Panasonic TC-29P100 Series Bedienungsanleitung

RCA

RCA F19422 Bedienungsanleitung

Sony

Sony WEGA KV 32HS20 Bedienungsanleitung

Samsung

Samsung SlimFit TX R3079WH Bedienungsanleitung

Palsonic

Palsonic MODEL 5179G Bedienungsanleitung

Toshiba

Toshiba CF13H22 Bedienungsanleitung

Magnavox

Magnavox MS3650C - 36" Smart Ctv Handbuch

Toshiba

Toshiba 14AF41 Bedienungsanleitung

Mitsubishi

Mitsubishi CS-35305 Bedienungsanleitung

Hitachi

Hitachi 35UX60B, 35TX10B Bedienungsanleitung

Sony

Sony KD-34XBR970 - 34" Hdtv 16x9 Format Bedienungsanleitung

Toshiba

Toshiba 27A34 - 27" CRT TV Bedienungsanleitung