Fitting the Processor Bowl & Attachments
Note: All attachments must be securely attached to the blade adaptor.
WARNING! The Blades are sharp so great care should be taken, always
handle blades by the central plastic section.
•Place the Blade Adaptor (C) onto the Drive Shaft (9). See Fig 1 below.
•Grating and slicing blade - Use to grate or slice cheese, vegetables, fruit for
example. Insert either the Grating Blade (B) or the Slicing Blade (D) into the
Blade Holder (E). Fit the Blade Holder (E) onto the top of the Blade Adaptor
(C). The Blade Holder (E) is secured in place when the lid is locked into place.
See Fig 2 below.
•Chopper blade - Use to chop meat, nuts, vegetables, bread crumbs, puree
foods and so on. Place the Chopper Blade (F) onto the Blade Adaptor (C) and
push down until the blade is securely in place at the base of the Blade Adaptor
(C). See Fig 3 below.
Using Your Food Processor
Grating and slicing blade
1. Carefully insert the required blade into the blade holder and fit the Blade
Holder (E) as detailed in Fig 1 and Fig 2 above.
WARNING! The Blades are sharp so great care should be taken.
2. Place the Lid (6) onto the Processing Bowl (5) and insert the Pusher (8), turn
clockwise until its locks into place.
3. Put the Processing Bowl (5) onto the Housing Unit (10), and turn clockwise
until it clicks into place.
4. Connect the mains plug to the power socket and switch the socket on.
5. Turn the Control Dial (12) to choose a processing speed.
6. Feed the ingredients to be grated or sliced down the Funnel (7) using the
Pusher (8).
IMPORTANT: Always use the pusher when feeding food into the funnel, never
push with your fingers.
7. When processing is complete, turn the Control Dial (12) to ‘0’.
8. Hold the Housing Unit (10) and grasp the bowl handle, turn anti-clockwise and
lift to release it.
�