Daewoo GAE 50 Bedienungsanleitung

Manufactured under license of Daewoo International Corporation, Korea

USER´S MANUAL

GAE 50-80-100

WATER PUMPS

TABLE OF CONTENTS

1.0 - OPERATION SAFETY

1.1 - Operation Safety

2.0 - COMPONENTS

3.0 - PRE-OPERATION INSPECTION

3.1 - Engine Oil Check 4

3.2 - Fuel Level Check 5

3.3 - Air Filter Check 6

3.4 - Hose Connections 7

4.0 - OPERATION

4.1 - Pump Placement 8

4.2 - Priming Water 9

4.3 - Starting Trash Pump 9

4.4 - Stopping the Engine 10

5.0 - MAINTENANCE

5.1 - Importance of Maintenance 11

5.2 - Maintenance Schedule 11

5.3 - Oil Maintenance 12

5.4 - Air Filter Service 13

5.5 - Spark Plug Service 14

5.6 - Fuel Sediment Cup 15

5.7 - Fuel Drainage 15

5.8 - Impeller Cleaning 16

5.9 - Transportation 17

5.10 - Storage 17

5.11 - External Parts Cleaning 18

6.0 - TROUBLESHOOTING 18

7.0 - SPECIFICATIONS 19

English

1.0 - SAFETY PRECAUTIONS

1.1 - Operation Safety

• Always perform a pre-operation check before starting the engine.

• Properly clean and maintain the equipment.

• Operate the Trash Pump according to instructions for safe and

dependable service.

• Read user manual carefully before operating this product! Failure to do

so may result in serious harm to the user and to the equipment.

• This product emits poisonous carbon monoxode gas. Do not operate in

an enclosed area.

• Be careful not to touch the exhaust system during operation due to risk

of burns.

• Pay attention to the warning labels. The engine exhaust system will

become heated during operation and remains hot immediately after the

engine is stopped.

•

ventilated area with the engine stopped.

• When refueling the Trash Pump, keep it away from cigarettes, open

• Place at least 5ft away from buildings or other equipment during

operation.

• Run on a level surface to avoid fuel spills

• Know how to stop the engine quickly and understand operation of all

the controls. Never permit anyone to operate this equipment without

proper training.

• Keep children, pets and machinery with rotating parts away during

operation.

• Do not touch the spark plug while the engine is operating or shortly after

the engine has been shut down.

• Do not use this product to work with caustic liquids.

English

2.0 IDENTIFICATION OF COMPONENTS

Outlet Port

Trash Pump

English

3.0 - PRE-OPERATING PROCEDURE

Inspect all components for damage and to ensure that none are missing. If

you require a replacement, do not operate this tool until all parts are present

and in proper working order.

Do not modify or create accessories for this equipment. Using modified

components may result in damage and may void the warranty. Contact

customer service if you suspect that this equipment has been tampered with.

3.1 - Engine Oil Check

1. Ensure the Trash Pump is on a level surface.

2. Inspect engine oil:

• Take out the dipstick and clean it with a dry towel.

•

English

3. If necessary, add engine oil - Open oil inlet located opposite the recoil

starter handle. Remove the dipstick and pour in the supplied oil with a

funnel. Do not operate without oil.

Reservoir can hold maximum 20 fl.oz of 10W30 oil - do not over fill.

Engine oil is a major factor affecting engine performance and service life. Non-

detergent or vegetable oils are not recommended.

3.2 - Fuel Level Check

1. Check the fuel level by opening the tank and visually inspecting

English

Gasoline is highly flammable and explosive under certain conditions. Refuel in

a well-ventilated area with the engine stopped. Do not smoke or allow open

flames or sparks in the area where the Trash Pump is being refueled or where

gasoline is stored. Do not overfill the tank. Be careful not to spill fuel when

refueling. Wipe up any spilled gasoline and let the area dry before starting the

engine. Gasoline substitutes such as gasohol are not recommended. They

may be harmful to the fuel system components

3.3 - Check the Air Filter

element and inspect for cleanliness.

and then soak in clean engine oil.

3. Squeeze out all excess oil and reinstall. Replace the element if it is

damaged.

Check the air filter according to the maintenance schedule. Always inspect

the air filter before using the Trash Pump. Clean Air Filter every 3 months or

after 50hrs of operation according Section 5.4: Air Filter Service procedure.

English

3.4 - Hose Connections

1. Insert adapters into each end of the suction and discharge hoses.

2. Attach O-Rings to the adaptors.

3. Tighten the hose clamp around the discharge hose.

4. Insert strainer into the suction hose and tighten the hose clamp around

the hose.

the hoses and do not place heavy objects on top.

English

4.0 - OPERATION

4.1 - Pump Placement

Placement is an important step in safely operating this product.

1. Refer to diagram for proper placement instructions.

2. Ensure that the suction head is less than the discharge head.

3. Increasing the discharge head will decrease output.

4. Ensure pump is primed to minimize the suction head.

Suction head is the height to which a pump can raise water on the suction

side, measured from the water level in the sump. Discharge head is the vertical

distance between the intake level of the water pump and the level at which

it discharges water freely. Total head is the sum of the suction and discharge

head.

English

4.2 - Priming Water

Make sure to prime the pump with water prior to operating it. Priming creates

a vacuum that helps to start the flow of water.

1. Unscrew the primer cap and insert the neck of the water container into

the opening. Gradually tilt until the reservoir is full.

2. Tighten the cap back on.

3. In case of dry operation (running the pump without priming), stop the

engine immediately and allow it to cool before following the priming

procedure.

Do not operate without priming. Doing so will overheat the engine and result

in damage to the system. Ensure that the priming water does not contain

debris.

4.3 - Starting the Trash Pump

RECOIL START METHOD

1. Rotate the fuel valve lever to ON position.

2. If the engine is cold: Push the choke lever to the CLOSE position out to

close the choke.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Daewoo Wasserpumpe Handbücher

Daewoo

Daewoo DDA80 Bedienungsanleitung

Daewoo

Daewoo GAET50 Bedienungsanleitung

Daewoo

Daewoo DSP1100-4 Bedienungsanleitung

Daewoo

Daewoo DASDM Series Bedienungsanleitung

Daewoo

Daewoo DAEPRES100 Bedienungsanleitung

Daewoo

Daewoo AUTOJET80S Bedienungsanleitung

Daewoo

Daewoo DBP2500 Bedienungsanleitung

Daewoo

Daewoo GP25-2 Bedienungsanleitung

Daewoo

Daewoo DDP17000 Bedienungsanleitung

Daewoo

Daewoo DAEQDP Series Bedienungsanleitung

Daewoo

Daewoo DDP17000 Bedienungsanleitung

Daewoo

Daewoo DBP1800 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung