Dahua Technology ASI1212D Bedienungsanleitung
tel: +44 (0)1457 874 999 | fax: +44 (0)1457 829 201 | email: [email protected] | web: www.cop-eu.com
ACCESS
CONTROL
QUICK INSTALL
GUIDE
Please read this document before installation
V1
Official UK distribution partner
2Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com
Dahua access controllers can be used in multiple installations scenarios with options for one door, two door or four door controllers
and one way or two way access.
The example below is based on a one door one way system.
Lock
Reader
Push Exit
Emergency Exit
INOUT
Controller
One Way Access Example
Reader
Lock
WIRING CONFIGURATION - ACS CONTROLLERS
3
The number of connections available varies between controller models but all controllers have the same basic confi guration. Each
controller can support at least one reader per door. Each door can also support push to exit, door sensor, lock output or an additional
reader for two way systems.
When connecting Dahua readers to Dahua controllers, Wiegand connections are not required if RS485 is used.
Reader Connections
Purple Cable RS485+ connection to controller
Power Input
DC/12V
Reset
12v
12v
12v
12v
GND
GND
GND
GND
Case
Case
Case
Case
D1
D1
D1
D1
D0
D0
D0
D0
LED
LED
LED
LED
485-
485-
GND
GND
GND
COM1
COM3
COM2
COM4
GND
GND
GND
485+
Push 2
OUT-
Push 3
Push 4
485-
485-
485+
485+
GND
Push 1
ALM-N
NC1
NC3
NC2
NC4
485-
SR1
OUT+
NO1
NO3
NO2
NO4
ADDRESS
DEFEND
SR2
SR3
SR4
485+
Yellow Cable RS485- connection to controller
Brown Cable Wiegand LED connection to controller
Green Cable Wiegand D0 connection to controller
White Cable Wiegand D1 connection to controller
Blue Cable Wiegand case/tamper connection to controller
Black Cable Reader ground connection to controller
Red Cable Reader 12v positive connection to controller
Connections
485+
LAN
TCP/IP
485 Card
Reader
485
Communication
No.1
Door
Card
Reader
Unlock
+
Door
Sensor
Unlock
+
Door
Sensor
Lock
Control
Output
Lock
Control
Output
No.1
Door
Electric
Lock
No.3
Door
Electric
Lock
No.2
Door
Electric
Lock
No.4
Door
Electric
Lock
Alarm Input
Alarm Output
No.2
Door
Card
Reader
No.3
Door
Card
Reader
No.4
Door
Card
Reader
Platform
Platform
Card
Reader
Power
Wiegand
Card
Reader
As
Above
As
Above
As
Above
No.1 Door Unlock Button
No.1 Door Unlock Button
No.1 Door Unlock Button
No.1 Door Unlock Button
No.1 Door Sensor Input
No.1 Door Sensor Input
No.1 Door Sensor Input
No.1 Door Sensor Input
Power Off Unlock
Lock 12v Input
Power Off Lock
As
Above
As
Above
As
Above
4Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com
The ASI1212D is a standalone two way controller with built in keypad, card & fi ngerprint readers. This unit supports a single door with
the option to add an external reader for use as a two way system.
The example below is based on a one way system.
Stand Alone Access Example
Lock
Reader
Push Exit
Emergency Exit
INOUT
Controller
Reader
Lock
WIRING CONFIGURATION - ASI1212D
5
Purple Cable RS485+
Yellow Cable RS485-
Brown Cable Wiegand LED
Green Cable Wiegand D0
White Cable Wiegand D1
Blue Cable Wiegand Tamper
Black Cable 12v - Power Output
Red Cable 12v + Power Output
Connector 2 (for external reader)
When connecting Dahua readers to Dahua controllers, Wiegand connections are not required if RS485 is used.
Purple Cable RS485+
Yellow Cable RS485-
Brown Cable Alarm Input Ground
Green Cable Alarm Input
White Cable Alarm Output
Blue Cable Alarm Output Ground
Black Cable Bell-
Red Cable Bell+
Connector 3
RJ45 Connector Network Connection
Connector 4
Purple Cable Push to Exit
Yellow Cable Ground (Push to Exit / Door Sensor)
Brown Cable Door Sensor
Green Cable Lock Output Normally Open
White Cable Lock Output Normally Closed
Blue Cable Lock Output Common
Black Cable 12v - Power Input
Red Cable 12v + Power Input
Connector 1
Connections
6Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com
Confi guring the access control system requires a computer with the ACS tool installed.
To install the ACS tool on a PC follow the steps listed below.
1. Go to www.cop-eu.com
2. Click on the Access Control category
3. Go to Controllers > click on your model of controller
4. Select the Downloads tab from underneath the product picture,
then click on Dahua toolbox and run the installer
Once the Toolbox has been installed an account must be registered before the confi guration tools can be installed.
After installing and registering an account on Dahua toolbox, scroll down the list of applications and fi nd ACSConfi g. Click the
install buttton to install the tool on your computer.
Once the Toolbox has been installed an account must be registered before the confi guration tools can be installed.
After installing and registering an account on Dahua toolbox, scroll down the list of applications and fi nd ACSConfi g. Click the
install buttton to install the tool on your computer, once installed click open to launch the tool.
Note: Make sure the computer running the tool is connected to the same LAN network as the ACS controller.
Any ACS controllers discoverable on the network will now be displayed within the search results, to modify the network confi guration
of the ACS controller, click to enter the new network confi guration. Click OK to save the setting.
Default Settings
Username: admin
Password: 123456
IP Address: 192.168.0.2
of the ACS controller, click to enter the new network confi guration. Click
ACS NETWORK CONFIGURATION
7
The ASI1212D features a screen interface that can be used to confi gure basic settings
including network confi guration.
To adjust the network confi guration of the unit, follow the steps below.
1. Press OK to display the admin login screen.
Enter the admin password followed by OK.
Default Settings
Username: admin
Password: 88888888
IP Address: 192.168.1.108
2. Press the Up/Down arrows to cycle through
the menu options. Highlight Settings and
press OK.
3. Select Network Setup and press OK. 4. Select IP Setup and press OK.
5. Modify the network settings accordingly and
press OK to save the changes.
ASI1212D NETWORK CONFIGURATION
8Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com
Both ACS controllers and the ASI1212D can be programmed via the Smart PSS software. If Smart PSS is not currently installed on the
PC then this can be installed using Dahua Toolbox.
When fi rst opening SmartPSS, the software will prompt for a password to be created, this password is used for logging into the
software only and is not the password of the controller.
It is important to keep this password safe as failure to remember the password will result in not being able to run the SmartPSS
software. The second step is to fi ll out the security questions and answers, they are used to reset the password if it is forgotten.
Once a password has been confi gured, login using the chosen password, the default username is admin.
From the home screen select the Devices option.
Smart PSS Initialisation
CONFIGURATION VIA SMART PSS
9
To add a controller, click the Add button.
Enter the connection details for the controller such as IP address, Username & Password, the default port number is 37777,
click Save to store the connection details.
The added controller should now show in the device list with the current status as online.
Adding a Controller
Note: If the device is not found, please refer to page 6.
10 Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com
All access control features are located within the Access section of the Smart PSS software. To enter this section, select the Access
icon from the Smart PSS home screen.
Once the access section has been opened the following screen will be shown. The number of doors displayed depends on the
controller type, if a four door controller has been added then four doors will be displayed.
Console
User Menu
Access Control
Menu
Event Menu
Log
Door Selection
Control
All Doors
Realtime
Access Log
Last Logged
Users Details
Toggle
View
Access Menu
Inhaltsverzeichnis
Andere Dahua Technology IP-Zugriffskontrollsysteme Handbücher
