Dahua Technology DH-IPC-PDW3849-A180-AS-PV-ANZ Bedienungsanleitung

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.2

Eyeball Network Camera

Quick Start Guide

Foreword

General

This manual introduces the installation, functions and operations of network camera. Read carefully

before using the device, and keep the manual safe for future reference.

Safety Instructions

The following categorized signal words with dened meaning might appear in the manual.

Signal Words Meaning

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, lower performance, or unpredictable

result.

Provides additional information as a supplement to the text.

Revision History

Version Revision Content Release Date

V1.0.2 Updated available appearance and

dimensions. June 2023

V1.0.1 Updated available appearance. February 2023

V1.0.0 First release. September 2022

Privacy Protection Notice

As the device user or data controller, you might collect the personal data of others such as their

face, ngerprints, and license plate number. You need to be in compliance with your local privacy

protection laws and regulations to protect the legitimate rights and interests of other people by

implementing measures which include but are not limited: Providing clear and visible identication

to inform people of the existence of the surveillance area and provide required contact information.

About the Manual

●The manual is for reference only. Slight dierences might be found between the manual and the

product.

●We are not liable for losses incurred due to operating of the product in ways that are not in

compliance with the manual.

●The manual will be updated according to the latest laws and regulations of related jurisdictions.

For detailed information, see the paper User Manual, use our CD-ROM, scan the QR code or visit

our ocial website. The manual is for reference only. Slight dierences might be found between

the electronic version and the paper version.

Quick Start Guide

●All the designs and software are subject to change without prior written notice. Product updates

might result in some dierences appearing between the actual product and the manual. Please

contact customer service for the latest program and supplementary documentation.

●There might be deviations in the description of the technical data, functions and operations, or

errors in the print. If there is any doubt or dispute, we reserve the right of nal explanation.

●Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

●All trademarks, registered trademarks and the company names in the manual are the properties

of their respective owners.

●Please visit our website, contact the supplier or customer service if any problems occur while

using the device.

●If there is any uncertainty or controversy, we reserve the right of nal explanation.

Quick Start Guide

Important Safeguards and Warnings

This section introduces content covering the proper handling of the device, hazard prevention, and

prevention of property damage. Read carefully before using the device, comply with the guidelines

when using it.

Transportation Requirements

●Transport the device under allowed humidity and temperature conditions.

●Pack the device with packaging provided by its manufacturer or packaging of the same quality

before transporting it.

●Do not place heavy stress on the device, violently vibrate or immerse it in liquid during

transportation.

Storage Requirements

●Store the device under allowed humidity and temperature conditions.

●Do not place the device in a humid, dusty, extremely hot or cold site that has strong

electromagnetic radiation or unstable illumination.

●Do not place heavy stress on the device, violently vibrate or immerse it in liquid during storage.

Installation Requirements

●Strictly comply with the local electrical safety code and standards, and check whether the power

supply is correct before operating the device.

●Please follow the electrical requirements to power the device.

When selecting the power adapter, the power supply must conform to the requirements of

ES1 in IEC 62368-1 standard and be no higher than PS2. Please note that the power supply

requirements are subject to the device label.

We recommend using the power adapter provided with the device.

●Do not connect the device to two or more kinds of power supplies, unless otherwise specied,

to avoid damage to the device.

●The device must be installed in a location that only professionals can access, to avoid the risk of

non-professionals becoming injured from accessing the area while the device is working.

Professionals must have full knowledge of the safeguards and warnings of using the device.

●Do not place heavy stress on the device, violently vibrate or immerse it in liquid during

installation.

●An emergency disconnect device must be installed during installation and wiring at a readily

accessible location for emergency power cut-o.

Quick Start Guide

III

●We recommend you use the device with a lightning protection device for stronger protection

against lightning. For outdoor scenarios, strictly comply with the lightning protection

regulations.

●Ground the function earthing portion of the device to improve its reliability (certain models

are not equipped with earthing holes). The device is a class I electrical appliance. Make sure that

the power supply of the device is connected to a power socket with protective earthing.

●The dome cover is an optical component. Do not directly touch or wipe the surface of the cover

during installation.

Operation Requirements

●The cover must not be opened while the device is powered on.

●Do not touch the heat dissipation component of the device to avoid the risk of getting burnt.

●Use the device under allowed humidity and temperature conditions.

●Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it,

to avoid reducing the lifespan of the CMOS sensor, and causing overbrightness and ickering.

●When using a laser beam device, avoid exposing the device surface to laser beam radiation.

●Prevent liquid from owing into the device to avoid damage to its internal components.

●Protect indoor devices from rain and dampness to avoid electric shocks and res breaking out.

●Do not block the ventilation opening near the device to avoid heat accumulation.

●Protect the line cord and wires from being walked on or squeezed particularly at plugs, power

sockets, and the point where they exit from the device.

●Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on

the lens.

●The dome cover is an optical component. Do not directly touch or wipe the surface of the cover

when using it.

●There might be a risk of electrostatic discharge on the dome cover. Power o the device when

installing the cover after the camera nishes adjustment. Do not directly touch the cover and

make sure the cover is not exposed to other equipment or human bodies

●Strengthen the protection of the network, device data and personal information. All necessary

safety measures to ensure the network security of the device must be taken, such as using

strong passwords, regularly changing your password, updating rmware to the latest version,

and isolating computer networks. For the IPC rmware of some previous versions, the ONVIF

password will not be automatically synchronized after the main password of the system has

been changed. You need to update the rmware or change the password manually.

Maintenance Requirements

●Strictly follow the instructions to disassemble the device. Non-professionals dismantling the

device can result in it leaking water or producing poor quality images. For a device that is

required to be disassembled before use, make sure the seal ring is at and in the seal groove

when putting the cover back on. When you nd condensed water forming on the lens or the

desiccant becomes green after you disassembled the device, contact after-sales service to

replace the desiccant. Desiccants might not be provided depending on the actual model.

Quick Start Guide

●Use the accessories suggested by the manufacturer. Installation and maintenance must be

performed by qualied professionals.

●Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on

the lens. When it is necessary to clean the device, slightly wet a soft cloth with alcohol, and

gently wipe away the dirt.

●Clean the device body with a soft dry cloth. If there are any stubborn stains, clean them away

with a soft cloth dipped in a neutral detergent, and then wipe the surface dry. Do not use

volatile solvents such as ethyl alcohol, benzene, diluent, or abrasive detergents on the device to

avoid damaging the coating and degrading the performance of the device.

●The dome cover is an optical component. When it is contaminated with dust, grease, or

ngerprints, use degreasing cotton moistened with a little ether or a clean soft cloth dipped in

water to gently wipe it clean. An air gun is useful for blowing dust away.

●It is normal for a camera made of stainless steel to develop rust on its surface after being used in

a strong corrosive environment (such as the seaside, and chemical plants). Use an abrasive soft

cloth moistened with a little acid solution (vinegar is recommended) to gently wipe it away.

Afterwards, wipe it dry.

Quick Start Guide

Table of Contents

Foreword........................................................................................................................................................................................................ I

Important Safeguards and Warnings.................................................................................................................................................III

1 Introduction..............................................................................................................................................................................................1

1.1 Appearance...................................................................................................................................................................................1

1.2 Cable................................................................................................................................................................................................1

1.3 Connecting Alarm Input/Output.......................................................................................................................................... 2

2 Network Conguration.........................................................................................................................................................................4

2.1 Initializing the Camera..............................................................................................................................................................4

2.2 Changing the Device IP Address...........................................................................................................................................5

2.3 Logging in to the Webpage....................................................................................................................................................5

3 Installation.................................................................................................................................................................................................6

3.1 Packing List................................................................................................................................................................................... 6

3.2 Dimensions................................................................................................................................................................................... 6

3.3 Installing the Camera................................................................................................................................................................ 8

3.3.1 Installation Methods..................................................................................................................................................... 8

3.3.2 (Optional) Installing the SD Card .............................................................................................................................8

3.3.3 Attaching the Camera.................................................................................................................................................. 9

3.3.4 (Optional) Installing Waterproof Connector......................................................................................................10

3.3.5 Adjusting Lens Angle................................................................................................................................................. 11

Quick Start Guide

1 Introduction

1.1 Appearance

This manual is available for the following appearances.

Figure 1-1 Available appearances

1.2 Cable

Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and

water damage. For the detailed operation, see FAQ manual.

Figure 1-2 Cables

Table 1-1 Cable information

No. Port name Description

1 Power input

Inputs 12 VDC power. Be sure to supply power as instructed in

the manual.

Device abnormity or damage might occur if power is not

supplied correctly.

2 Ethernet port

●Connects to network with network cable.

●Provides power to the device with PoE.

PoE is available on select models.

3 Alarm I/O

Includes alarm signal input and output ports. The number of I/O

ports might vary on dierent devices. For detailed information,

see Table 1-2 .

Quick Start Guide

No. Port name Description

4 Audio input

Connects to sound pickups to receive audio signals.

Audio input is available on select models.

5 Audio output

Connects to speaker to output audio signals.

Audio output is available on select models.

Table 1-2 Description of Alarm I/O port

Port Name Description

ALARM_IN Receives the switch signals of external alarm source.

ALARM_OUT Outputs alarm signals to alarm devices.

ALARM_GND Ground connection.

1.3 Connecting Alarm Input/Output

The camera can connect to external alarm input/output devices through the digital input/output

port.

Alarm input/output is available on select models.

Procedure

Step 1 Connect the alarm input device to the alarm input end of the I/O port. See Figure 1-3 .

The device collects dierent statuses of the alarm input port while the input signal is

idling and being grounded.

●Device collects logic "1" when the input signal is connected to +3 V to +5 V or idling.

●Device collects logic "0" when the input signal is grounded.

Figure 1-3 Alarm input

Step 2 Connect the alarm output device to the alarm output end of the I/O port. The alarm

output is an open-drain output, which works in the following modes.

●Mode A: Level application. The alarm outputs high and low level signals, and the alarm

outlet is OD, which requires external pull-up resistance (10 K Ohm typical) to work. The

maximum external pull-up level is 12 V, maximum port current is 300 mA, and the

Quick Start Guide

default output signal is high-level (external pull-up voltage). The default output signal

switches to low- level when an alarm is triggered (As long as the operating current is

below 300 mA, the output low-level voltage is lower than 0.8 V).

●Mode B: Switch application. Alarm output is used to drive the external circuit. The

maximum voltage is 12 V and the maximum current is 300 mA. If the voltage is higher

than 12 V, please use an additional electric relay.

Figure 1-4 Alarm output

Step 3 Log in to the webpage, and then congure the alarm input and alarm output in alarm

settings.

●The alarm input on the webpage corresponds to the alarm input end of the I/O port.

There will be high level and low level alarm signals generated by the alarm input

device when an alarm occurs. Set the input mode to "NO" (default) if the alarm input

signal is logic "0", and set to "NC" if the alarm input signal is logic "1".

●The alarm output on the webpage corresponds to the alarm output end of the device,

which is also the alarm output end of the I/O port.

Quick Start Guide

Inhaltsverzeichnis

Andere Dahua Technology Sicherheitskamera Handbücher

Dahua Technology

Dahua Technology IPC-HFW2431T-ZS Bedienungsanleitung

Dahua Technology

Dahua Technology D-SD6C3432XB-HNR-AGQ-PV Bedienungsanleitung

Dahua Technology

Dahua Technology DH-IPC-HFW3849T1P-AS-PV-S3-BLK Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HDW1531SP Bedienungsanleitung

Dahua Technology

Dahua Technology DH-IPC-PFW83242-A180-S2 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW2849S-S-IL-0280B Bedienungsanleitung

Dahua Technology

Dahua Technology 50430IC Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW7442H-Z-X Bedienungsanleitung

Dahua Technology

Dahua Technology DSS4004-S2 Allgemeine Anweisungen

Dahua Technology

Dahua Technology 59230UNI Bedienungsanleitung

Dahua Technology

Dahua Technology A21BC0V Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HDB3202-DI Series Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW5449T1-ASE-D2-0360B Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-MBW4231-AS/M12 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW1320S-W Bedienungsanleitung

Dahua Technology

Dahua Technology N52BF5Z Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-PDW5849-A180-E2-ASTE Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW5431E-Z Bedienungsanleitung

Dahua Technology

Dahua Technology HDW2831TM-AS-S2 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW2431DG-4G Bedienungsanleitung

Dahua Technology

Dahua Technology PC-EBW81242 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW81230E-Z Bedienungsanleitung

Dahua Technology

Dahua Technology A83AR6 Bedienungsanleitung

Dahua Technology

Dahua Technology EZ-IP BULLET Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung