Dahua Villa VTO Bedienungsanleitung

Villa VTO

(Version 3.1)

Quick Start Guide

V1.0.1

Cybersecurity Recommendations

Mandatory actions to be taken towards cybersecurity

1. Change Passwords and Use Strong Passwords:

The number one reason systems get “hacked” is due to having weak or default passwords. It is

recommended to change default passwords immediately and choose a strong password

whenever possible. A strong password should be made up of at least 8 characters and a

combination of special characters, numbers, and upper and lower case letters.

2. Update Firmware

As is standard procedure in the tech-industry, we recommend keeping NVR, DVR, and IP

camera firmware up-to-date to ensure the system is current with the latest security patches and

fixes.

“Nice to have” recommendations to improve your network security

1. Change Passwords Regularly

Regularly change the credentials to your devices to help ensure that only authorized users are

able to access the system.

2. Change Default HTTP and TCP Ports:

● Change default HTTP and TCP ports for systems. These are the two ports used to

communicate and to view video feeds remotely.

● These ports can be changed to any set of numbers between 1025-65535. Avoiding the

default ports reduces the risk of outsiders being able to guess which ports you are using.

3. Enable HTTPS/SSL:

Set up an SSL Certificate to enable HTTPS. This will encrypt all communication between your

devices and recorder.

4. Enable IP Filter:

Enabling your IP filter will prevent everyone, except those with specified IP addresses, from

accessing the system.

5. Change ONVIF Password:

On older IP Camera firmware, the ONVIF password does not change when you change the

system’s credentials. You will need to either update the camera’s firmware to the latest revision

or manually change the ONVIF password.

6. Forward Only Ports You Need:

III

● Only forward the HTTP and TCP ports that you need to use. Do not forward a huge range of

numbers to the device. Do not DMZ the device's IP address.

● You do not need to forward any ports for individual cameras if they are all connected to a

recorder on site; just the NVR is needed.

7. Disable Auto-Login on SmartPSS:

Those using SmartPSS to view their system and on a computer that is used by multiple people

should disable auto-login. This adds a layer of security to prevent users without the appropriate

credentials from accessing the system.

8. Use a Different Username and Password for SmartPSS:

In the event that your social media, bank, email, etc. account is compromised, you would not

want someone collecting those passwords and trying them out on your video surveillance

system. Using a different username and password for your security system will make it more

difficult for someone to guess their way into your system.

9. Limit Features of Guest Accounts:

If your system is set up for multiple users, ensure that each user only has rights to features and

functions they need to use to perform their job.

10. UPnP:

● UPnP will automatically try to forward ports in your router or modem. Normally this would be a

good thing. However, if your system automatically forwards the ports and you leave the

credentials defaulted, you may end up with unwanted visitors.

● If you manually forwarded the HTTP and TCP ports in your router/modem, this feature should

be turned off regardless. Disabling UPnP is recommended when the function is not used in real

applications.

11. SNMP:

Disable SNMP if you are not using it. If you are using SNMP, you should do so only temporarily,

for tracing and testing purposes only.

12. Multicast:

Multicast is used to share video streams between two recorders. Currently there are no known

issues involving Multicast, but if you are not using this feature, deactivation can enhance your

network security.

13. Check the Log:

If you suspect that someone has gained unauthorized access to your system, you can check

the system log. The system log will show you which IP addresses were used to login to your

system and what was accessed.

14. Physically Lock Down the Device:

Ideally, you want to prevent any unauthorized physical access to your system. The best way to

achieve this is to install the recorder in a lockbox, locking server rack, or in a room that is

behind a lock and key.

15. Connect IP Cameras to the PoE Ports on the Back of an NVR:

Cameras connected to the PoE ports on the back of an NVR are isolated from the outside world

and cannot be accessed directly.

16. Isolate NVR and IP Camera Network

The network your NVR and IP camera resides on should not be the same network as your

public computer network. This will prevent any visitors or unwanted guests from getting access

to the same network the security system needs in order to function properly.

Foreword

General

This document mainly introduces structure, mounting process, debugging and verification

process of villa VTO products.

Device Upgrade

Please don’t cut off power supply during device upgrade. Power supply can be cut off only after

the device has completed upgrade and has rebooted.

Safety Instructions

The following categorized signal words with defined meaning might appear in the Manual.

Signal Words

Meaning

Indicates a high potential hazard which, if not avoided, will result

in death or serious injury.

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, lower performance, or unpredictable

result.

Provides methods to help you solve a problem or save you time.

Provides additional information as the emphasis and supplement

to the text.

Revision History

No.

Version No.

Revision Content

Release Date

V1.0.0

First release

2017.11.10

V1.0.1

Add privacy protection notice

2018.05.23

Privacy Protection Notice

As the device user or data controller, you might collect personal data of others' such as face,

fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be

in compliance with the local privacy protection laws and regulations to protect the legitimate

rights and interests of other people by implementing measures include but not limited to:

providing clear and visible identification to inform data subject the existence of surveillance

area and providing related contact.

About the Manual

The Manual is for reference only. If there is inconsistency between the Manual and the

actual product, the actual product shall prevail.

We are not liable for any loss caused by the operations that do not comply with the Manual.

The Manual would be updated according to the latest laws and regulations of related

regions. For detailed information, see the paper User's Manual, CD-ROM, QR code or our

official website. If there is inconsistency between paper User's Manual and the electronic

version, the electronic version shall prevail.

All the designs and software are subject to change without prior written notice. The product

updates might cause some differences between the actual product and the Manual. Please

contact the customer service for the latest program and supplementary documentation.

There still might be deviation in technical data, functions and operations description, or

errors in print. If there is any doubt or dispute, please refer to our final explanation.

Upgrade the reader software or try other mainstream reader software if the Guide (in PDF

format) cannot be opened.

All trademarks, registered trademarks and the company names in the Manual are the

properties of their respective owners.

Please visit our website, contact the supplier or customer service if there is any problem

occurred when using the device.

If there is any uncertainty or controversy, please refer to our final explanation.

VII

Important Safeguards and Warnings

The following description is the correct application method of the device. Please read the

manual carefully before use, in order to prevent danger and property loss. Strictly conform to

the manual during application and keep it properly after reading.

Operating Requirement

Please don’t place and install the device in an area exposed to direct sunlight or near heat

generating device.

Please don’t install the device in a humid, dusty or fuliginous area.

Please keep its horizontal installation, or install it at stable places, and prevent it from

falling.

Please don’t drip or splash liquids onto the device; don’t put on the device anything filled

with liquids, in order to prevent liquids from flowing into the device.

Please install the device at well-ventilated places; don’t block its ventilation opening.

Use the device only within rated input and output range.

Please don’t dismantle the device arbitrarily.

Please transport, use and store the device within allowed humidity and temperature range.

Power Requirement

The product shall use electric wires (power wires) recommended by this area, which shall

be used within its rated specification!

Please use power supply that meets SELV (safety extra low voltage) requirements, and

supply power with rated voltage that conforms to Limited Power Source in IEC60950-1. For

specific power supply requirements, please refer to device labels.

Appliance coupler is a disconnecting device. During normal use, please keep an angle that

facilitates operation.

VIII

Table of Contents

Cybersecurity Recommendations........................................................................................................ II

Foreword .................................................................................................................................................V

Important Safeguards and Warnings .................................................................................................VII

1Product Structure............................................................................................................................... 1

1.1 VTO6210B/BW.............................................................................................................................. 1

1.1.1 Front Panel ......................................................................................................................... 1

1.1.2 Rear Panel.......................................................................................................................... 2

1.2 VTO6000CM/VTO6100C.............................................................................................................. 4

1.2.1 Front Panel ......................................................................................................................... 4

1.2.2 Rear Panel.......................................................................................................................... 5

1.3 VTO2000A/VTO2000A-2.............................................................................................................. 6

1.3.1 Front Panel ......................................................................................................................... 6

1.3.2 Rear Panel.......................................................................................................................... 7

2Mounting and Debugging................................................................................................................ 11

2.1 Mounting ......................................................................................................................................11

2.1.1 VTO6210B and VTO6210BW............................................................................................11

2.1.2 VTO6000CM and VTO6100C........................................................................................... 12

2.1.3 VTO2000A/VTO2000A-2.................................................................................................. 13

2.2 Debugging................................................................................................................................... 16

2.2.1 VTO Settings..................................................................................................................... 16

2.2.2 VTH Settings (Version 3.1)............................................................................................... 19

2.2.3 VTH Settings (Version 4.0)............................................................................................... 22

2.3 Debugging Verification................................................................................................................ 27

2.3.1 Verification with Version 3.1 VTH..................................................................................... 27

2.3.2 Verification with Version 4.0 VTH..................................................................................... 28

1Product Structure

1.1 VTO6210B/BW

1.1.1 Front Panel

Figure 1-1

No.

Name

Description

Fill-in light

Provide fill-in light for camera in case of insufficient light.

Camera

Monitor the door area.

Card

swiping area

Open the door with authorized IC card and swiping card.

Ensure that access extension module has been connected.

Call key

Call management center or VTH.

Table 1-1

1.1.2 Rear Panel

Figure 1-2

No.

Name

Description

Tamper switch

When VTO is detached from the wall forcibly, give out alarm sound

and report alarm info to management center.

Network port

Insert network cable (RJ45 plug).

Power port

Connect 12V DC power supply.

RS485 port

Be able to connect access extension module.

Speaker

Audio output.

Table 1-2

Figure 1-3

Andere Handbücher für Villa VTO

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dahua Gegensprechanlage Handbücher

Dahua

Dahua DHI-KTA02 Bedienungsanleitung

Dahua

Dahua VDP Series Bedienungsanleitung

Dahua

Dahua VTO2000A Series Bedienungsanleitung

Dahua

Dahua VTO2000A Series Bedienungsanleitung

Dahua

Dahua VTO6 series Bedienungsanleitung

Dahua

Dahua VTH2611L-WP Bedienungsanleitung

Dahua

Dahua Digital VTH Bedienungsanleitung

Dahua

Dahua DHI-VTH1550CH Bedienungsanleitung

Dahua

Dahua Digital VTH Bedienungsanleitung

Dahua

Dahua VTO12 Series Bedienungsanleitung

Dahua

Dahua VTO2101E-P Bedienungsanleitung

Dahua

Dahua VTO4202F-P Bedienungsanleitung

Dahua

Dahua VTO5110B Bedienungsanleitung

Dahua

Dahua MP06 Bedienungsanleitung

Dahua

Dahua VTK-VTO2000A-VTH1550 Bedienungsanleitung

Dahua

Dahua VTO12 Series Bedienungsanleitung

Dahua

Dahua VTO2111D-WP Bedienungsanleitung

Dahua

Dahua DHI-VTO2311R-WP Bedienungsanleitung

Dahua

Dahua D-VTO3312Q-P Bedienungsanleitung

Dahua

Dahua VTH5221 series Bedienungsanleitung

Dahua

Dahua VTH5221 series Bedienungsanleitung

Dahua

Dahua VTO7541G Bedienungsanleitung

Dahua

Dahua DHI-VTO4202F Series Bedienungsanleitung

Dahua

Dahua KTP03 Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung

Bticino

Bticino Classe 300 Bedienungsanleitung