Dahua SD60-***-SL Series Bedienungsanleitung

Anti-corrosion Intelligent Speed Dome

Installation Manual

Version 1.0.0

Table of Contents

1INSTALLATION PREPARATION........................................................................1

1.1 Basic requirements................................................................................................................................1

1.2 Installation Check ..................................................................................................................................1

1.3 Cable Requirements .............................................................................................................................1

1.3.1 Video Cable Requirements .............................................................................................................1

1.3.2 Power Supply Cable Requirements...............................................................................................2

2SPEED DOME INSTALLATION..........................................................................3

2.1 Check Accessories................................................................................................................................3

2.2 Open the Device ....................................................................................................................................3

2.3 Dial Switch Setup...................................................................................................................................4

2.3.1 Dial Switch Address and Function..................................................................................................4

2.3.2 Dial Switch Setup..............................................................................................................................5

2.3.3 Address Setup...................................................................................................................................5

2.3.4 Baud Rate, Parity Setup, HD/SD Video Mode Setup..................................................................6

2.3.5 Terminal Matched Resistance Setup.............................................................................................7

2.4 SD Card Installation (Network Speed Dome)....................................................................................8

2.5 Speed Dome Installation ......................................................................................................................8

Note:......................................................................................................................................................................8

2.5.1 Cable Connection .............................................................................................................................8

2.5.2 Junction Box and Protection Tube Installation ...........................................................................10

2.5.3 Install Speed Dome........................................................................................................................11

3COMPONENT DIMENSION .............................................................................14

3.1 Junction Box.........................................................................................................................................14

3.2 Wall Mount Bracket .............................................................................................................................14

3.3 Corner Mount Bracket.........................................................................................................................15

3.4Pole Mount Bracket .............................................................................................................................16

4WALL MOUNT BRACKET INSTALLATION......................................................18

4.1 Component Installation .......................................................................................................................18

4.2 Wall Mount Installation Steps ............................................................................................................18

4.2.1 Installation Requirements..............................................................................................................18

4.2.2 Installation Steps.............................................................................................................................18

5CORNER MOUNT BRACKET INSTALLATION ................................................20

5.1 Component Installation .......................................................................................................................20

5.2 Corner Mount Bracket Installation Steps .........................................................................................20

5.2.1 Installation Requirements..............................................................................................................20

5.2.2 Installation Steps.............................................................................................................................20

6POLE MOUNT BRACKET INSTALLATION ......................................................23

6.1 Component Installation .......................................................................................................................23

6.2 Pole Mount Bracket Installation Steps..............................................................................................23

6.2.1 Installation Requirements..............................................................................................................23

6.2.2 Installation Steps.............................................................................................................................23

7APPENDIX ⅠLIGHTNING PROOF AND SURGE PROTECTION .....................26

iii

8APPENDIX ⅡABOUT RS485 BUS ...................................................................27

8.1 RS485 Bus Main Feature ...................................................................................................................27

8.2 RS485 Bus Transmission Distance ..................................................................................................27

8.3 The Problem in Practical Use ............................................................................................................27

8.4 RS485 Bus FAQ ..................................................................................................................................28

9APPENDIX ⅢTHE RELATIONSHIP BETWEEN THE 24V AC CABLE

DIAMETER AND THE TRANSMISSION DISTANCE...............................................29

10 APPENDIX ⅣTHE RELATIONSHIP BETWEEN THE 12V DC CABLE

DIAMETER AND THE TRANSMISSION DISTANCE...............................................31

11 APPENDIX IV WIRE GAUGE REFERENCE SHEET ....................................... 33

Welcome

Thank you for purchasing our speed dome!

Please read the following safeguards and warnings carefully before you install or use the

product!

Important Safeguards and Warnings

Safety Measures

1. Qualified Engineer Needed

The installation engineer or maintenance engineer shall have corresponding CCTV system

installation certificate or maintenance qualification certificate.

The installation engineer or maintenance engineer shall have qualification certificate for work

at height.

The installation engineer or maintenance engineer shall have the basic knowledge and

operation technique for low-voltage cable layout and low-voltage electronic cable connection.

Please read the installation manual carefully and keep it well for future reference,

We are not liable for any problems caused by unauthorized modifications or attempted repair.

2. Lifting Appliance Requirement

Please select the proper speed dome installation mode and use the lifting appliances at the

safety environment.

The lifting appliances shall have the enough capacity to reach the installation height.

The lifting appliances shall have safe performance.

The precaution measures include two types: Warning and Note.

Warning: It is to alert you there is an optional risk of death or series injury!

Note: It is to alert you there is an optional risk of damage or property loss!

Warning

1. All installation and operation here should conform to your local electrical safety codes. We

assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

2. Be sure to use all the accessories (such as power adapter) recommended by manufacturer.

3. Laser light is dangerous; please do not look at it straight.

4. Do not connect several speed domes to one power adapter. It may result in overheat or fire

if it exceeds the rated load.

5. Before you connect the cable, install or uninstall, or begin the daily maintenance work,

please turn off the power and unplug the power cable.

6. Please make sure the produce is secure firmly on the wall or the ceiling.

7. Please turn off the power and unplug the power cable, If there is any smoke, disgusting

smell, or noise. Please contact your local retailer or customer service center for help.

8. All the examination and repair work should be done by the qualified service engineers. We

are not liable for any problems caused by unauthorized modifications or attempted repair.

Note

1. Safety Transportation

Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

This series product must use split type package during the transportation.

We are not liable for any damage or problem resulting from the integrated package during

the transportation.

2. When device is malfunction

Shut down the device and disconnect the power cable immediately if there is smoke, abnormal

smell or abnormal function. Please contact your local retailer ASAP.

3. Do not try to dismantle or modify the device

There is risk of personal injury or device damage resulting from opening the shell.

Please contact your local retailer if there is internal setup or maintenance requirement.

We are not liable for any problems caused by unauthorized modifications or attempted repair.

4. Do not allow other object falling into the device

Please make sure there is no metal or inflammable, explosive substance in the speed dome.

The above mentioned objects in the device may result in fire, short-circuit or damage.

Please shut down the device and disconnect the power cable if there is water or liquid falling

into the camera. Please contact your local retailer ASAP.

Please pay attention to the camera. Avoid the sea water or rain to erode the camera.

5. Handle carefully

Do not allow this series product fall down to the ground.

Avoid heavy vibration.

6. Installation Environment Requirement

This series speed dome should be installed in a cool, dry place away from direct sunlight,

inflammable, explosive substances and etc.

This series product shall be away from the strong electromagnetism radiant, please keep it

away from wireless power, TV transmitter, transformer and etc.

7. Daily Maintenance

vii

Please use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning

liquid to clean the shell and then use soft cloth to make it dry.

Do not use gasoline, dope thinner or other chemical material to clean the shell. It may result

in shell transfiguration or paint flake.

Do not allow the plastic or rubber material to touch the shell for a long time. It may result in

paint flake.

It is highly recommended to use the product with a lightning-proof device, which can realize

better lightning-proof effect.

1Installation Preparation

1.1 Basic requirements

All installation and operation here should conform to your local electrical safety codes.

Before installation, please open the package and check all the components are included.

Please make sure the speed dome installation environment and installation mode can meet

your requirement. If there is special requirement, please contact your local retailer for more

information.

We assume no liability or responsibility for all the fires or electrical shock caused by

improper handling or installation.

1.2 Installation Check

Please make sure the installation environment has enough space to install the speed dome

and its corresponding bracket.

Please make sure the ceiling, wall and the bracket can sustain the 8X weight of the speed

dome and its installation components.

Please make sure the wall is thick enough to install expansion bolts (need to be purchased).

Please notice that the installation height should be more than 6m if it is a laser speed dome.

1.3 Cable Requirements

1.3.1 Video Cable Requirements

The minimum video cable requirements are as follows:

75 ohm impedance.

Full copper core cable.

95% knitted copper shield

Different types of devices use different cable models. Please refer to sheet 1-1 for the cable used

by analog and network speed dome, please refer to sheet 1-2 for the cable used by HDCVI

speed dome.

International Model

Max Distance

(Ft\M)

RG59/U

750ft (229m)

RG6/U

1,000ft (305m)

RG11/U

1,500ft (457m)

Sheet 1-1

International Model

Max Distance

(Ft\M)

SYV-75-3

720P（25fps\30fps）：1640ft\500m

720P（50fps\60fps）：984ft\300m

1080P（25fps\30fps）：984ft\300m

Sheet 1-2

1.3.2 Power Supply Cable Requirements

Refer to appendix 3 for AC 24V power supply device.

Refer to appendix 4 for DC12V power supply device.

Inhaltsverzeichnis

Andere Dahua Sicherheitskamera Handbücher

Dahua

Dahua HDBW2831R-ZAS Bedienungsanleitung

Dahua

Dahua IPC-HDW8341X-3D Bedienungs- und Wartungsanleitung

Dahua

Dahua D-IPC-HFW7442H-ZVH Bedienungsanleitung

Dahua

Dahua N53AJ5Z Bedienungsanleitung

Dahua

Dahua HFW2231T-ZS-S2 Bedienungsanleitung

Dahua

Dahua HAC-HDBW2120EP Bedienungsanleitung

Dahua

Dahua Wi-Fi RANGER PRO Z Bedienungsanleitung

Dahua

Dahua IPC-HFW1100S Bedienungsanleitung

Dahua

Dahua DH-IPC-HF8242FP-FR Bedienungsanleitung

Dahua

Dahua DH-IPC-PDBW82041N-B360 Bedienungsanleitung

Dahua

Dahua HAC-HFW2401SP Bedienungsanleitung

Dahua

Dahua DH-HAC-HFW1200T-A Bedienungsanleitung

Dahua

Dahua DHI-ITC237-PW1A-IRZ Bedienungsanleitung

Dahua

Dahua IR High Speed Dome Camera Bedienungsanleitung

Dahua

Dahua IPC-EB5541-AS Bedienungsanleitung

Dahua

Dahua HAC-HDB1200F-M Bedienungsanleitung

Dahua

Dahua HAC-HUM1220G-M Bedienungsanleitung

Dahua

Dahua DH-IPC-GX6 Bedienungsanleitung

Dahua

Dahua DH-EPC PTZ Series Bedienungsanleitung

Dahua

Dahua TPC-BF5400 Bedienungsanleitung

Dahua

Dahua HAC-HDW2231R-Z Bedienungsanleitung

Dahua

Dahua IPC-HFW2231S-S-S2 Bedienungsanleitung

Dahua

Dahua Network Camera Web 3.0 Bedienungsanleitung

Dahua

Dahua SD22 Series Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung