Daikin BRC1H71W Bedienungsanleitung

Wired Remote

Controller

Installation Manual

MODEL BRC1H71W

English

• Be sure to read before conducting the installation of this product, and conduct

installation according to this manual.

• Refer to this manual together with the installation manual of the indoor unit.

It is possible to perform settings of some functions from

a smart phone app.

01_EN_EM19A026_IM.indd 1 2020/09/08 14:20:58

01_EN_EM19A026_IM.indd 2 2020/09/08 14:20:58

English 1

Contents

Safety Considerations ........................................................ 2

Accessories ........................................................................ 3

Remote controller installation procedure............................ 4

Button Locations and Descriptions................................... 11

Overview of screens......................................................... 12

Setting screen list ............................................................. 13

Names and Functions ...................................................... 15

Starting up the system...................................................... 16

Switching the Changeover Master.................................... 19

Installer Menu................................................................... 23

Field Setting ..................................................................... 24

R/C Setting ....................................................................... 28

Installer Password Setting ................................................ 32

Other Service Settings ..................................................... 33

Certication ...................................................................... 34

License ............................................................................. 35

01_EN_EM19A026_IM.indd 1 2020/09/08 14:20:58

2 English

Safety Considerations

The original instructions are written in English. All other languages are translations of the original

instructions.

All phases of the eld-installation, including, but not limited to, electrical, piping, safety, etc. must be in

accordance with manufacturer’s instructions and must comply with national, state, provincial and local

codes.

Read these SAFETY CONSIDERATIONS carefully before installing the remote controller.

After completing the installation, ensure that the remote controller operates properly during startup

operation.

Train the customer to operate and maintain the remote controller. Inform customers that they should

store this Installation Manual with the Operation Manual for future reference.

Always use a licensed installer or contractor to install this product. Improper installation can result in

electrical shock, re, or explosion.

Meanings of WARNING, CAUTION, and NOTE Symbols.

WARNING Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

It may also be used to alert against unsafe practices.

NOTE Indicates situations that may result in equipment or property-damage

accidents only.

WARNING

Only qualied personnel must carry out the installation work.

Consult your Daikin dealer regarding relocation and reinstallation of the remote controller.

Improper installation work may result in electric shocks or re.

Electrical work must be performed in accordance with relevant local and national regulations and

with instructions in this installation manual.

Improper installation may cause electrical shocks or re.

Use only specied accessories and parts for installation work.

Failure to use specied parts may result in electric shocks, re, or the unit falling.

Do not disassemble, reconstruct, or repair.

Electric shock or re may occur.

Make sure that all wiring is secured, that specied wires are used, and that no external forces act on

the terminal connections or wires.

Improper connections or installation may result in re.

Before touching electrical parts, conrm the power is off to the unit.

CAUTION

Keep water out of the remote controller.

To avoid electric shock due to entry of water or insects, ll the wiring through-hole with putty.

Do not wash the remote controller with water as it may result in electrical shocks or re.

Do not touch the remote controller buttons with wet ngers.

Touching the buttons with wet ngers can cause an electric shock.

01_EN_EM19A026_IM.indd 2 2020/09/08 14:20:58

English 3

CAUTION

Do not install the remote controller in the following locations:

(a) Where a mineral oil mist or oil spray or vapor is produced, for example, in a kitchen.

Plastic parts may deteriorate.

(b) Where corrosive gas, such as sulfurous acid gas, is produced.

Electromagnetic waves may disturb the operation of the control system and cause the unit to malfunction.

(d) Where ammable gas may leak, where there is carbon ber or ignitable dust suspension in the

air, or where volatile ammables such as thinner or gasoline are handled.

Operating the unit in such conditions can cause a re.

(e) High temperature areas or areas with direct ames.

Overheating and/or re can occur.

(f) Moist areas where there is exposure to water. If water enters the inside of the remote controller,

it may cause electric shock and electrical components may fail.

NOTE

Install the control wires for the indoor unit and the remote controller at least 3.5 feet (1 meter) away

from televisions or radios to prevent image interference or noise. Depending on the radio waves, a

distance of 3.5 feet (1 meter) may not be sufcient to eliminate the noise.

When the remote controller’s temperature sensor is used, select the installation location as per the following:

• A place where average temperature in the room can be detected.

• A place where it is not exposed to direct sunlight.

• A place where it is far away from any heat source.

• A place where it is not affected directly by outside air.

Accessories

The following accessories are included.

Drywall screw Drywall anchor Operation Handbook Installation Handbook

(3 pcs.) (3 pcs.) (3 pcs.) (1 pc.)

Mounting plate

(Metal)

Mounting plate

(Plastic)

Screw for mounting plate

(M3.5×10)

Screw for mounting plate

(M4×40)

(1 pc.) (1 pc.) (3 pcs.) (2 pcs.)

01_EN_EM19A026_IM.indd 3 2020/09/08 14:20:59

4 English

Remote controller installation

procedure

Deciding where to install the remote controller

Select the installation location based on “Safety Considerations” (see page 2) and obtain

consent of the customer.

Creating a wiring through-hole in the wall (when opening a

hole in the wall and installing)

If the hole size is too large or not in the

proper location, it may be seen after the

remote controller is installed.

NOTE

3-11/64 (80.5)

13/64

(5)

33/64 (13)

1-47/64 (44)

9/32 (7)

R3/32(2.5)

13/64

(5)

41/64

(16.25)

1-47/64 (44)

35/64

(13.75)

3-11/64 (80.5) Back plate

Through-hole

Align the center of the wall

hole with the center of the

access hole on the controller

back plate when planning the

installation.

Access hole

[Unit : inch (mm)]

Back plate

Through-hole

Access

hole

CAUTION

• Note that if the wiring through-hole is large or deviates from the specied position, the hole may be

exposed.

01_EN_EM19A026_IM.indd 4 2020/09/08 14:20:59

English 5

Determining the wire routing direction for the back plate

Before mounting the controller, determine the wiring direction and remove a piece of the

controller’s back plate accordingly (i.e.: a, b, c). The wiring can be routed from the top, the

left, or the bottom of the back cover. Remove a piece of the back plate according to the

following gure.

After removing a thin piece with a tool such as clippers, remove burrs using a le, etc.

a Wiring from top

b Wiring from left

c Wiring from bottom

CAUTION

In case you are routing the wiring from the rear, you don’t have to remove anything.

When routing the wiring from the top, rear, left, bottom, or when installing on a mounting plate etc., be

sure to route the wiring to the upper casing before securing the back plate.

01_EN_EM19A026_IM.indd 5 2020/09/08 14:20:59

6 English

Securing the back plate

Wall installation

1 : Take the drywall screws and drywall anchors out of the accessory bag.

2 : Mount the back plate to a at surface.

Drywall screws

Drywall anchors

In case of installing in the electrical component box

1 : Take the screws for the mounting plate (M3.5×10 and M4×40), and the mounting

plates (metal and plastic) out of the accessory bag.

2 : Attach the mounting plate (metal) to the electrical component box with the screws for

the mounting plate (M4×40).

3 : Attach the back plate and mounting plate (plastic) with the screws for mounting plate

(M3.5×10).

CAUTION

• For the installation surface, select as at a location as possible.

•

Choose a place where there is no gap between the wall and the screw xing part of the back plate.

• If there is an empty space between the back plate and the screw xing part (nut part) due to the

structure of the wall, install with a torque of 20 N · cm or less.

• If the upper casing comes o easily, loosen the drywall screws to lessen the deformation.

• If tightened too much, the back plate will be deformed and the upper casing will come o easily.

If the upper casing comes o easily, loosen the screws and correct the deformation.

01_EN_EM19A026_IM.indd 6 2020/09/08 14:21:00

English 7

Connecting the electrical wiring

All wiring must comply with the following requirements:

Wire specification Value

Wiring type Non-shielded, 2-conductor, Stranded copper wire

Wiring size AWG-18

Wiring length Maximum 1640 feet (500 m)

Prepare the wiring for connection to the remote controller following these instructions:

Approx. 3/8 inch (10 mm)

Remove the wire jacket

and insulation

To simplify the wiring, maintain

a 3/8 inch (10 mm) dierence

between the length of the two

conductors.

Cutting guideline

Wiring outlet L

Top ±5.5 inch (140 mm)

Left ±4.3 inch (110 mm)

Bottom ±3.5 inch (90 mm)

Rear No requirements

Connect the terminals (P1, P2) of the remote controller to the terminals (P1, P2) of the

indoor unit. (P1 and P2 are not polarity sensitive.)

CAUTION

• Before working, shut o all power supplies.

• Do not touch the remote controller circuit board directly with your hands.

01_EN_EM19A026_IM.indd 7 2020/09/08 14:21:00

8 English

Top outlet

P1P2

P1P2 terminal

Rear outlet

P1P2

Left outlet

P1P2

01_EN_EM19A026_IM.indd 8 2020/09/08 14:21:00

Andere Handbücher für BRC1H71W

Inhaltsverzeichnis

Andere Daikin Fernbedienung Handbücher

Daikin

Daikin BRC7E63W Bedienungsanleitung

Daikin

Daikin BRC51D64 Bedienungsanleitung

Daikin

Daikin BRC7C62 Bedienungsanleitung

Daikin

Daikin ARC433A51 Gebrauchsanweisung

Daikin

Daikin BRC1D52 Bedienungsanleitung

Daikin

Daikin BRC230Z4B Bedienungsanleitung

Daikin

Daikin BRC4C61 Bedienungsanleitung

Daikin

Daikin BRC7C51W Bedienungsanleitung

Daikin

Daikin BRC301B61 Bedienungsanleitung

Daikin

Daikin BRC7FA532F Bedienungsanleitung

Daikin

Daikin BRC1H81S7 Installations- und Betriebsanleitung

Daikin

Daikin BRC7E530W7 Bedienungsanleitung

Daikin

Daikin BRC1H63K Bedienungsanleitung

Daikin

Daikin Madoka BRC1HHDW Bedienungsanleitung

Daikin

Daikin BRC1D527 Bedienungsanleitung

Daikin

Daikin BRC1E62 Bedienungsanleitung

Daikin

Daikin BRC082A43 Bedienungsanleitung

Daikin

Daikin ARC447A Bedienungsanleitung

Daikin

Daikin BRC7EA631 Bedienungsanleitung

Daikin

Daikin BRC1E73 Bedienungsanleitung

Daikin

Daikin BRC1D528 Bedienungsanleitung

Daikin

Daikin BRC7M634F Bedienungsanleitung

Daikin

Daikin BRC7E83 Bedienungsanleitung

Daikin

Daikin BRC7E530W Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung