Daktronics SLD 110 Bedienungsanleitung
SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 1 of 27
Table Of Contents
Unpacking - Page 2
Installation Parts and Tools - Page 3
Part A: Upper Beam Installation - Page 4
Part B: Cabinets Installation - Page 8
Part C: Bottom Beam Installation - Page 17
Part D: Power Box Installation - Page 20
Part E: LED Module Installation - Page 25
Warnings and Disclaimers
• Ensure that all electrical work meets or
exceeds all local or national electrical codes.
• Provide the required power to the display as
listed on the product labels, specications,
or site-specic riser drawings. The conductor
size may vary based on the length of the
power run.
• Consider implementing a separate circuit for
the display using an isolation transformer or
dedicated transformer.
• Daktronics assumes no liability for any issues
caused by line voltage uctuations or other
improper power conditions.
SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 2 of 27
Unpacking
SLD 110" UNPACKING INSTRUCTION
STEP 2: TAKE OUT THE PACKAGESSTEP 1: OPEN CRATE
Crate 1
CONTROL BOX & REAR BEAMS
CONTROL BOX @1 REAR BEAM @2
HARDWARE & TOOL BOX @7
Crate 2
4 CABINETS & MODULES & SPARE PARTS
152x103x96 cm 59.8x40.6x37.8 inch
145x96x80 cm
STEP 2: TAKE OUT THE FILLER BOXSTEP 1: OPEN CRATE
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING
ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY
ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF
DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES.
COPYRIGHT 2022 DAKTRONICS, INC. (USA)
THIRD ANGLE PROJECTION
REV
TITLE:
PROJECT:
DESIGN:
SCALE:
DIM UNITS:DATE: SHEET
DO NOT SCALE DRAWING
FUNC - TYPE - SIZE
DRAWN: -
JOB NO.
-
MILLIMETERS
SLD SERIES DISPLAY PROJECT
SLD 110" UNPACKING INSTRUCTION
JW
27-OCT-2022
F 10 A3
NO SCALE
JW 5159994
001 OF 1
A3H
STEP 3: TAKE OUT MODULES & SPARES PACKAGES STEP 4: TAKE OUT CABINETS PACKAGES
MIDDLE CABINETS @1 LEFT & RIGHT CABINET @1 MODULE BOX @3 SPARE PARTS BOX @1
FILLER (FILLED EMPTY SPACE)
SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 3 of 27
Installation Parts and Tools
DAKTRONICS PROVIDED CUSTOMER PROVIDED
HC-4084277
M8X50 SOCKET HEAD BOLT
0M-4671476
CABINET FLATNESS JIG
HC-1855
M6X16 SOCKET HEAD BOLT
HC-4827328
M8X15 COUNTERSUNK SOCKET HEAD BOLT
TH-4896293
PHILLIPS SCREWDRIVER
0A-2238-9999
MODULE TOOL (INSTALL AND REMOVAL)
TH-4964504
GLOVES
W-4137608
POWER INPUT CABLE
MOUNTING ANCHOR BOLT
CORDLESS DRILL
SOCKET FOR ANCHOR BOLT (WORK WITH
CORDLESS DRILL)
DRILL BIT (WORK WITH ANCHOR BOLT / CORDLESS
DRILL)
TAPE MEASURE
LASER LEVEL
4FT LEVEL (OPTIONAL WHEN WITHOUT LASER LEVEL)
2 LADDERS
SCISSORS
HC-4827329
M6X40 SET-SCREW
TH-4896295
ALLEN KEY SET
DAK PROVIDE CUSTOMER PROVIDE
HC-4084277 M8X50 SOCKET HEAD SCREW
0M-4671476 CABINET FLATNESS JIG
HC-1855 M6X16 SOCKET HEAD SCREW
HC-4827328 M8X15 COUNTERSUNK SOCKET HEAD SCREW
TH-4896295 M6 (5#) ALLEN KEY
MOUNTING ANCHOR BOLT
CORDLESS DRILL
DRILL BIT (WORK WITH ANCHOR BOLT / CORDLESS DRILL )
TAPE MEASURER
4FT LEVEL
(OPTIONAL WHEN WITHOUT LASER LEVEL)
INSTALL PARTS AND TOOLS
0A-2238-9999 MODULE TOOL (INSTALL AND REMOVAL)
TH-4176465 MODULE ADJUSTMENT TOOL
TH-4896293 PHILLIPS SCREW DRIVER
TH-4964504 GLOVE
2 LADDERS
LASER LEVEL
W-4137608 POWER INPUT CABLE
SOCKET FOR ANCHOR BOLT (WORK WITH CORDLESS DRILL)
SLD 220"
INSTALLATION MANUAL
HC-4827329 M6X40 JACK PIN
HC-4305316 M4X10 COUNTERSUNK PHILLIPS SCREW
0M-4685011 POWER BOX LINK PLATE
0M-5018247
MODULE ADJUSTMENT KEY
SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 4 of 27
2
LASER LEVEL
2 LADDERS
CORDLESS DRILL
DRILLING
DRILL BIT
(WORK WITH ANCHOR BOLT
/ CORDLESS DRILL )
DRILLNG
Part A: Upper Beam Installation
Step 1: Location
TAPE MEASURE
1 LADDER
LASER LEVEL
LASER PLUMB LINE
(UPPER BEAM LOCATION)
REFER TO DWG-4945693 FOR RECOMMENDED UPPER BEAM LOCATION.
SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 5 of 27
Part A: Upper Beam Installation
Step 2: Drilling
800
117
2202
1519
2452
1220
CL
CORDLESS DRILL
DRILL BIT
LASER LEVEL
2 LADDERS
DRILLING
COUNTERSUNK HOLES
FACING OUTWARD
SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 6 of 27
Part A: Upper Beam Installation
Step 3: Mounting And Adjustment
DIM
DIM
DIM
DIM
DIM
DIM
DIM
MOUNTING
ADJUSTMENT
CORDLESS DRILL
LASER LEVEL
2 LADDERS
MOUNTING
ANCHOR BOLT
SOCKET FOR
ANCHOR BOLT
4FT LEVEL
HC-4827329
M6X40 SET-SCREW
TH-4896295
ALLEN KEY SET
M6 (5#)
DAK PROVIDE CUSTOMER PROVIDE
HC-4084277 M8X50 SOCKET HEAD SCREW
0M-4671476 CABINET FLATNESS JIG
HC-1855 M6X16 SOCKET HEAD SCREW
HC-4827328 M8X15 COUNTERSUNK SOCKET HEAD SCREW
TH-4896295 M6 (5#) ALLEN KEY
MOUNTING ANCHOR BOLT
CORDLESS DRILL
DRILL BIT (WORK WITH ANCHOR BOLT / CORDLESS DRILL )
TAPE MEASURER
4FT LEVEL
(OPTIONAL WHEN WITHOUT LASER LEVEL)
INSTALL PARTS AND TOOLS
0A-2238-9999 MODULE TOOL (INSTALL AND REMOVAL)
TH-4176465 MODULE ADJUSTMENT TOOL
TH-4896293 PHILLIPS SCREW DRIVER
TH-4964504 GLOVE
2 LADDERS
LASER LEVEL
W-4137608 POWER INPUT CABLE
SOCKET FOR ANCHOR BOLT (WORK WITH CORDLESS DRILL)
SLD 220"
INSTALLATION MANUAL
HC-4827329 M6X40 JACK PIN
HC-4305316 M4X10 COUNTERSUNK PHILLIPS SCREW
0M-4685011 POWER BOX LINK PLATE
SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 7 of 27
Part A: Upper Beam Installation
Step 4: Drilling And Mounting
DIM
DIM
DIM
DIM
DIM
DIM
DIM
CORDLESS DRILL
LASER LEVEL
MOUNTING
ANCHOR BOLT
SOCKET FOR
ANCHOR BOLT
4FT LEVEL
DRILL BIT
DRILLING
MOUNTING
1 LADDER
305mm
12" 305mm
12" 305mm
12" 305mm
12" 305mm
12"
305mm
12"
SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 8 of 27
Part B: Cabinets Installation
Step 5: Hang Cabinets
M
I
D
D
L
E
LOCATION LABEL
SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 9 of 27
Part B: Cabinets Installation
Step 6: Slide In 1st Middle Column
M
I
D
D
L
E
REAR VIEW
SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 10 of 27
R
I
G
H
T
Part B: Cabinets Installation
Step 7: Slide In Remaining Columns
R
I
G
H
T
a) Slide In Additional
Middle Column
b) Slide In Right Column
LOCATION LABEL
L
E
F
T
LOCATION LABEL
c) Slide In Left Column
Andere Handbücher für SLD 110
1
Inhaltsverzeichnis
Andere Daktronics Monitor Handbücher
Daktronics
Daktronics Galaxy AF-3400 Series Bedienungsanleitung
Daktronics
Daktronics ProPixel PSX-5901-125MN-3 Bedienungsanleitung
Daktronics
Daktronics DVX-2101 Series Bedienungsanleitung
Daktronics
Daktronics 6000 Series Bedienungsanleitung
Daktronics
Daktronics WP-2103 Bedienungsanleitung
Daktronics
Daktronics DVX-1830 Series Benutzerhandbuch
Daktronics
Daktronics Small Matrix Galaxy GS6 Series Benutzerhandbuch
Daktronics
Daktronics CH-1421V Bedienungsanleitung
Daktronics
Daktronics FUELIGHT FL-3000 Series Benutzerhandbuch
Daktronics
Daktronics DSF-600 Series Bedienungsanleitung
Daktronics
Daktronics Galaxy Series Bedienungsanleitung
Daktronics
Daktronics Galaxy AF-3155 Bedienungsanleitung
Daktronics
Daktronics Galaxy AF-3080 Series Bedienungsanleitung
Daktronics
Daktronics VANGUARD VC6 Bedienungsanleitung
Daktronics
Daktronics ST-2002 Bedienungsanleitung
Daktronics
Daktronics SLD 110 Bedienungsanleitung
Daktronics
Daktronics GALAXY GT6 Series Benutzerhandbuch
Daktronics
Daktronics GALAXY ECCB Series Bedienungsanleitung
Daktronics
Daktronics Galaxy AF-3400 Series Bedienungsanleitung
Daktronics
Daktronics VF-2400 GEN 2 Series Bedienungsanleitung
