Danby DPA060BACBDB Montageanleitung

OWNER’S USE AND CARE GUIDE

GUIDE D’UTILISATION ET D'ENTRETIEN

MODEL • MODÈLE

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840

2016.12.01

DPA060BACBDB / DPA080BACBDB

PORTABLE AIR CONDITIONER

CLIMATISEUR PORTATIF

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF

PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE

REFERENCE.

POUR OBTENIR LE SERVICE SUR GARANTIE, VOUS DEVEZ FOURNIR UNE

PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE

POUR RÉFÉRENCE FUTURE.

This product is factory equipped with a power supply cord that has a three-pronged ground-

ed plug. It must be plugged into a mating grounding type receptacle in accordance with the

National Electrical Code and applicable local codes and ordinances. If the circuit does not

have a grounding type receptacle, it is the responsibility and obligation of the customer to

exchange the existing receptacle in accordance with the National Electrical Code and ap-

plicable local codes and ordinances. The third ground prong should not, under any circum-

stances, be cut or removed. Never use the cord, the plug or the appliance when they show

any sign of damage. Do not use your appliance with an extension cord unless it has been

checked and tested by a qualiﬁed electrician or electrical supplier. Improper connection of

the grounding plug can result in risk of ﬁre, electric shock and/or injury to persons associat-

ed with the appliance. Check with a qualiﬁed service representative if in doubt that the appli-

ance is properly grounded.

IMPORTANT - GROUNDING METHOD

Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ﬁches. Il

doit être branché dans une prise avec une ﬁche de mise à la terre en conformité avec le Code

national de l’électricité et les codes et règles locaux applicables. Si la prise murale n’a pas de

mise à la terre, il est de la responsabilité et l’obligation du client de changer la prise existante

pour la rendre conforme au Code national de l’électricité et aux codes et règles locaux

applicables. La ﬁche de mise à la terre ne doit pas, en aucune circonstance, être coupée ou

retirée. Si vous apercevez des signes de dommage, n’utilisez jamais le cordon d’alimentation,

la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été vériﬁée

et testée par un électricien qualiﬁé ou un fournisseur de matériel électrique. Une ﬁche de

mise à la terre mal branchée peut entraîner un risque d’incendie, de choc électrique ou de

blessures aux personnes qui utilisent l’appareil. Si vous n’êtes pas certain que l’appareil est

correctement mis à la terre, consultez un préposé du service qualiﬁé.

IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

PORTABLE AIR CONDITIONER

Owner’s Use and Care Guide ................................1-15

• Welcome

• Important Safety Information

• Features

• Installation Instructions

• Operation Instructions

• Care and Maintenance

• Troubleshooting

• Warranty

CLIMATISEUR PORTATIF

Guide d’utilisation et d’entretien............................16-30

• Bienvenue

• Consignes de sécurité importantes

• Caractéristiques

• Consignes d’installation

• Consignes d’utilisation

• Soins et entretien

• Dépannage

• Garantie

CONTENTS / TABLE DES MATIÈRES

Model • Modèle

DPA060BACBDB / DPA080BACBDB

Read and follow all safety rules and operating instructions before ﬁrst

use of this product.

Veuillez lire attentivement les consignes de sécurité et les instructions

d’utilisation avant l’utilisation initiale de ce produit.

Welcome

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will

find in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best

of all, you will experience these values each and every time you use your Danby appliance. That is important, because

your new appliance will be a part of your family for a long time.

Note the information below; you will need this information to obtain service under warranty.

To receive service, you must provide the original receipt.

Model Number:

Serial Number:

Date of Purchase:

NEED HELP?

Before you call for service, here are a few things you can do to help

us serve you better:

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your

appliance properly.

If you received a damaged appliance:

Immediately contact the retailer (or builder) that sold you the

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide before call-

ing. This section helps you solve common problems that may occur.

If you do need service, you can relax, knowing help is only a phone

call away.

1-800-26-

(1-800-263-2629)

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

SAFETY PRECAUTIONS

ALWAYS DO THIS

Your air conditioner should be used in such a way that it is protected from moisture, e.g. condensation,

splashed water, etc. Do not place or store your air conditioner where it can fall or be pulled into water or

any other liquid. Unplug unit immediately if this occurs.

Always transport your air conditioner in a vertical position and place on a stable, level surface during use.

If the unit is transported laying on its side it should be stood up and left unplugged for 6 hours.

Turn off the unit when not in use.

Always contact a qualiﬁed person to perform repairs. If the power cord is damaged it must be repaired by

a qualiﬁed technician.

Keep the unit away from walls, furniture and curtains with a clearance of at least 30 cm all around.

If the air conditioner is knocked over during use, turn off the unit and unplug it immediately.

Always use the switch on the control panel to turn the unit on or off.

NEVER DO THIS

Do not operate your air conditioner in a wet room such as a bathroom or laundry room.

Do not touch the unit with wet or damp hands.

Do not press the buttons on the control panel with anything other than your ﬁngers.

Do not remove any ﬁxed components. Never use this appliance if it is not working properly, or if it has

been dropped or damaged.

Never use the plug to start and stop the unit.

Do not cover or obstruct the inlet or outlet grilles.

Do not use hazardous chemicals to clean or come into contact with the unit.

Do not use the unit in the presence of inﬂammable substances or vapour such as alcohol, insecticides,

gasoline, etc.

Do not allow children to operate the unit unsupervised.

Do not use this product for functions other than those described in this instruction manual.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

ENERGY SAVING TIPS

OPERATING

CONDITIONS

TOOLS FOR WINDOW KIT

INSTALLATION

• Use the unit in the recommended room size.

• Locate the unit where furniture cannot obstruct the air ﬂow.

• Keep blinds/curtains closed during the sunniest part of the day.

• Keep the ﬁlters clean.

• Keep doors and windows closed to keep cool air in and warm air out (cooling mode)

The air conditioner must be operated within the temperature range

indicated below:

Note: Performance may be reduced outside of these operating temperatures.

1. Screwdriver (medium size, Phillips)

2. Tape measure or ruler

3. Knife or scissors

4. Saw (In the event that the window kit needs to be cut down in size

because the window is too narrow for direct installation).

See www.danby.com for general instruction guide

Identifying Parts

WARNING

• Do not store or use gasoline or other ﬂammable vapours and liquids in the vicinity of this or any other

appliance.

• Avoid ﬁre hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any

prong from the power cord.

ELECTRICAL INFORMATION

WARNING

• Be sure the electrical supply is adequate for the model you have chosen. This information can be found

on the serial plate, which is located on the side of the cabinet and behind the grille.

• Be sure the air conditioner is properly grounded. To minimize shock and ﬁre hazards, proper grounding

is important. The power cord is equipped with a three-prong grounding plug for protection against

shock hazards.

• Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you

intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a

qualiﬁed electrician install the proper receptacle.

• Ensure the receptacle remains accessible after the unit is installed.

MODE ROOM TEMPERTURE

Cool 17°C (62°F) ~ 35°C (95°F)

Dry 13°C (55°F) ~ 35°C (95°F)

POWER OUTAGE In the case of a power outage, the unit will automatically re-start with the last setting

after the power is restored.

Wait 3 minutes before resuming operation

After the unit has stopped, it cannot operate for the ﬁrst 3 minutes. This is to protect

the unit. Operation of the compressor will automatically start after 3 minutes.

Identifying Parts

ACCESSORIES

Ensure that all the accessories are

included in the package and refer to

the installation instructions for their

usage.

Note: All the illustrations in this man-

ual are for explanatory purposes only.

Your air conditioner may be slightly

different.

UNIT STRUCTURE

 "74&2;&/.F >.;&;DF

.&;F 3;05F 

  C%?8;F08#F 

 &. 0AF*' #5F 3;15F 

 0+;F 

  &. 0AF,' #5FF 

    &. 0AF*' #5FF. FF 

 0-F#*FF %#9(@#F





  0-F#*FF %#9(@#F 

 1-F#*FF1. %#9'@#F 

  $?6'<EF6)$=F.!FF6$B:F 

  4&.F09#F 

#-1;#F0.;50**#5F. F;;#5DF

  

 

Features

ELECTRONIC CONTROL INSTRUCTIONS AND OPERATING MODES

Mode Button: Press to select the desired mode. Modes will cycle in sequence with each press

of the button; COOL, DRY, FAN. Light will indicate current mode. Fan speed can be chosen on

COOL and FAN modes using the remote control.

COOL mode Note: The hose should be exhausted during COOL mode

- Press the mode button until the COOL icon illuminates

- Press the UP or DOWN arrow buttons to select the desired room temperature

- The temperature can be set within a range of 17-30°C / 62-86°F

FAN mode

- Press the mode button until the FAN icon illuminates

- Fan speed can be adjusted using the remote control

DRY mode

- Press the mode button until the DRY icon illuminates

- The display will show the current room temperature

- Fan speed and temperature cannot be adjusted in this mode

Up and Down Buttons: Used to adjust temperature settings in COOL mode. Press and hold

both Up and Down buttons for 3 seconds to change the temperature display from °C to °F.

Power Button: Press to turn the unit on or off.

LED Display:

- While on COOL mode shows the set temperature in °C or °F

- When on FAN and DRY mode shows the room temperature

- Displays error codes

AUTO mode

- Can only be activated by remote control

- There is noAUTO mode display on the control panel

- Display will show COOL or FAN based on ambient room temperature

SLEEP mode

- Can only be activated from the remote control

- Conserves energy during sleeping hours

- Once activated, SLEEP mode will increase the set temperature by 1 degree for 30 minutes.

The set temperature will increase another degree in the next 30 minutes and then will maintain

temperature for 7 hours before returning to the original setting.

- The SLEEP function is only available in COOL mode

Operating Instructions

OPERATING MODES

Timer Operation

Note: Timer function can only be activated by the remote control.

This unit has two timer related functions:

• Timer on: sets the amount of time after which the unit will turn on

• Timer off: sets the amount of time after which the unit will turn off

Timer On Function:

• Press the Timer On button on the remote control

• The last time period that was set will show on the display

• Press the Timer On button repeatedly to set the amount of hours that should pass before the unit

turns on

• Wait two seconds for the programming to be accepted by the unit

Timer Off Function:

• Press the Timer Off button on the remote control

• The last time period that was set will show on the display

• Press the Timer Off button repeatedly to set the amount of hours that should pass before the unit

turns off

• Wait two seconds for the programming to be accepted by the unit

Notes:

• Pressing the Timer On or Timer Off buttons will increase the set time in 0.5 hour increments up to

10 hours and then in 1 hour increments up to 24 hours

• The display will revert back to showing the previous temperature setting if the unit does not re-

ceive a signal within a 5 second period during programming

• Adjusting the timer setting to 0.0 hours will cancel the Auto-timer settings

Using the Auto-on and Auto-off feature at the same time

You can set the air conditioner to run the Auto-on and Auto-off features at the same time. Keep in

mind that the hours displayed on the unit refer to the number of hours that will pass from the current

time before the action is taken.

For example:

• First, set the Timer On or Timer Off function as per above

• Wait three seconds for programming to be accepted by the unit

• Set the Timer Off or Timer On function

• Wait three seconds for programming to be accepted by the unit

Auto-Restart: If the unit looses power unexpectedly, it will restart with the previous function settings

when power is restored.

Note: Once the unit has stopped, it cannot be restarted for 3 minutes. Operation will resume after 3

minutes.

REMOTE CONTROL INSTRUCTIONS

Operating Instructions

• Use the remote control within a distance of 8 m

(26 ft.) from the appliance, pointing it towards the

receiver. Reception is conﬁrmed by a beep.

MODE: Selects mode operation

in the following order:

Auto -->Cool -->Dry -->Fan

FAN SPEED: Selects fan speed

in the following order:

Auto -->Low -->High

ON/OFF: Turns the unit on or off

Model RG57H1(B)/BGCE-M

Rated Voltage 3.0V (dry batteries R03/LR03x2)

Signal Receiving Range 8m (26 feet)

Environment -5°C to 60°C (23°F to 140°F)

TEMP

SLEEP: Conserves energy

during sleeping hours

LED: Turns the LED

display on or off

TIMER OFF: Used to set

Auto-off function

TIMER ON: Used to set

Auto-on function

SHORTCUT: Sets and activates

favourite setting

SHORTCUT function (only available on remote):

- Used to save a favourite setting

- Set the unit to the temperature and fan speed that you would like to set as a favourite

- Press and hold the SHORTCUT button for 2 seconds

- Press the SHORTCUT button at any point in future to return to the favourite setting

- If no favourite is set, pressing the SHORTCUT button will cause the unit to run in AUTO mode at

26°C (79°F), with fan speed set to AUTO

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Danby Klimaanlage Handbücher

Danby

Danby DPA140HB1BDB-6 Bedienungsanleitung

Danby

Danby DAC150EB1GDB Montageanleitung

Danby

Danby DPA140HEAUBDB Montageanleitung

Danby

Danby DPA085B1GB Montageanleitung

Danby

Danby SAC5299 Bedienungsanleitung

Danby

Danby DAC18002 Bedienungsanleitung

Danby

Danby DAC5012M Montageanleitung

Danby

Danby DAC5071M Bedienungsanleitung

Danby

Danby DAC10059 Bedienungsanleitung

Danby

Danby Designer DPAC10061 Bedienungsanleitung

Danby

Danby DPA100B2WDB Montageanleitung

Danby

Danby Simplicity SAC5000EE Bedienungsanleitung

Danby

Danby DAC080EB2GDB Bedienungsanleitung

Danby

Danby DAC080BAUWDB Montageanleitung

Danby

Danby DPAC10099 Montageanleitung

Danby

Danby Premiere DVAC8071EE Bedienungsanleitung

Danby

Danby DPAC5011 Montageanleitung

Danby

Danby DPSL120B1W Bedienungsanleitung

Danby

Danby DPA100E3WDB Bedienungsanleitung

Danby

Danby DAC10011E Montageanleitung

Danby

Danby DAC080EB7WDB Bedienungsanleitung

Danby

Danby DESIGNER DPAC10011 Montageanleitung

Danby

Danby DPA100HE5WDB-6 Bedienungsanleitung

Danby

Danby DPA100D1MDD Montageanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung