Danby DAC050MB3GDB Montageanleitung

Model • M odèle • Modelo

OWNER’S USE AND CARE GUIDE

GUIDE D’UTILISATION ET SOINS DE PROPRIÈTAIRE

GUÍA DE UTILIZACIÓN Y CUIDADO PARA EL PROPIETARIO

MODEL • MODÈLE • MODELO

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840 V1.2 .11.13

AIR CONDITIONER

CLIMATISEUR

AIRE ACONDICIONADO

DAC050MB3GDB

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDEA VALID PROOF OF

PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE

REFERENCE.

-------------------------------------------------------------------------------------------------------------------

POUR OBTENIR LE SERVICE SUR GARANTIE VOUS DEVEZ FOURNIR UNE

PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE

POUR RÉFÉRENCE FUTURE.

-------------------------------------------------------------------------------------------------------------------

PARA OBTENER SERVICIO DE GARANTÍA, DEBE PROVEER UN RECIBO

ORIGINAL. POR FAVOR ENGRAPE SU RECIBO A ÉSTA PÁGINA EN CASO QUE

NECESITE HACER UN RECLAMO.

This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must

be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and

applicable local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the

responsibility and obligation of the customer to exchange the existing receptacle in accordance with the

National Electrical Code and applicable local codes and ordinances. The third ground prong should not,

under any circumstances, be cut or removed.

IMPORTANT - GROUNDING METHOD

Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ﬁches. Il doit être

branché dans une prise avec une ﬁche de mise à la terre en conformité avec le Code National de l’Électricité

et les codes et règles locales applicables. Si le prise murale n’a pas de mise à la de terre, il est de la

responsabilité et l’obligation du client de changer la prise existante pour la rendre conforme aux Codes

Nationaux de l’Électricité, aux codes et règles locaux applicables. La ﬁche de la mise à la terre ne doit pas,

en aucune circonstance, être coupée ou retirée.

IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

Este producto viene equipado con un cable eléctrico que tiene un enchufe de tres patas con conexión

a tierra. Este debe colocarse en una toma de corriente con conexión a tierra de acuerdo con el Código

nacional de electricidad y códigos y ordenanzas locales correspondientes. Si el circuito no cuenta con

una toma de corriente con conexión a tierra, es responsabilidad y obligación del cliente sustituir la toma

de corriente actual de acuerdo con el Código nacional de electricidad y códigos y ordenanzas locales

correspondientes. Bajo ninguna circunstancia se debe cortar o eliminar la tercera pata de conexión a tierra.

IMPORTANTE - MÉTODO DE CONEXIÓN A TIERRA

AIR CONDITIONER

Owner’s Use and Care Guide ................................1-10

• Welcome

• Important Safety Information

• Features

• Installation Instructions

• Operation Instructions

• Care and Maintenance

• Troubleshooting

• Warranty

CLIMATISEUR

Guide d’utilisation et d’entretien du propriétaire....11-20

• Bienvenue

• Consignes de sécurité importantes

• Caractéristiques

• Consignes d’installation

• Consignes d’utilisation

• Soins et entretien

• Dépannage

• Garantie

AIRE ACONDICIONADO

Guía de utilización y cuidado para el propietario..21-31

• Bienvenido

• Información importante sobre seguridad

• Características

• Instrucciones de instalación

• Instrucciones de funcionamiento

• Cuidado y mantenimiento

• Resolución de problemas

• Garantía

CONTENTS

Model • Modèle • Modelo

DAC050MB3GDB

CAUTION:

Read and follow all safety rules and operating

instructions before ﬁrst use of this product.

PRÉCAUTION:

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

PRECAUCIÓN:

Lea y observe todas las relgas de seguridad y

las instrucciones de operación antes de usar

este producto por la primera vez.

WELCOME

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will

ﬁnd in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best of

all, you will experience these values each and every time you use your Danby appliance. That is important, because your

new appliance will be a part of your family for a long time.

For easy reference, we suggest you attach a copy of your sales slip/receipt to this page, along with the following

information, located on the manufacturer’s nameplate on the right side of the unit above the powercord.

Note the information below; you will need this information to obtain service under warranty.

To receive service, you must provide the original receipt.

NOTE: THIS UNIT IS NOT DESIGNED FOR “THROUGH-THE-WALL” INSTALLATION.

Model No:

Serial No:

Date Purchased:

NEED HELP?

Before you call for service, here are a few things you can do to

help us serve you better:

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your

appliance properly.

If you received a damaged appliance:

Immediately contact the retailer (or builder) that sold you the

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide

before calling. This section helps you solve common problems

that may occur.

If you do need service, you can relax, knowing help is only a

phone call away.

Tel: 1-800-26-

(1-800-263-2629)

WARNING

Improper connection of the grounding plug can result in risk of

ﬁre, electric shock and/or injury to persons associated with the

appliance. Check with a qualiﬁed service representative if in doubt

that the appliance is properly grounded.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

1. All wiring must comply with local and national electrical codes and must be installed by a qualiﬁed electrician. If you

have any questions regarding the following instructions, contact a qualiﬁed electrician.

2. Check available power supply and resolve any wiring problems BEFORE installing and operating this unit.

3. This 115V air conditioner uses 3.88 or less nameplate amps and may be used in any properly wired, general-purpose

household receptacle. See Table 1 for the speciﬁcations for the individual branch circuit.

4. For your safety and protection, this unit is grounded through the powercord plug when plugged into a matching wall

outlet. If you are not sure whether your wall outlet is properly grounded, please consult a qualiﬁed electrician.

5. The wall outlet must match the 3-prong plug on the service cord supplied with the unit. DO NOT use plug adapters.

See Table 2 for receptacle and fuse information. If it is necessary to use an extension cord to connect your air condi-

tioner, use an approved “air conditioner” extension cord only (available at most local hardware stores).

6. The rating plate on the unit contains electrical and other technical data. The rating plate is located on the right side of

the unit, above the powercord.

ELECTRICAL

REQUIREMENTS

TABLE 1

Suggested Individual Branch Circuit

Nameplate Amps

3.88 *AWG Wire Size

AWG-American Wire Gauge

*Based on copper wire at 60°C temperature rating

TABLE 2

Receptacle and Fuse Types

Rated Volts 125

Amps 15

Wall Outlet

Fuse Size 15

Time Delay Fuse Plug Type

(or Circuit Breaker)

FOR YOUR SAFETY: Read these instructions carefully before operating the unit.

FEATURES

Your Danby appliance is designed to be highly efﬁcient in energy savings. Follow these recommendations for

greater efﬁciency.

1. Select a thermostat setting that suits your comfort needs and leave at that chosen setting.

2. The air ﬁlter is very efﬁcient in removing airborne particles. Keep the air ﬁlter clean at all times. (Usually cleaned every

2 weeks depending on indoor air quality.)

3. Use drapes, curtains or shades to keep direct sunlight from penetrating and heating the room, but do not allow drapes

or curtains to obstruct the air ﬂow around the unit.

4. Start your air conditioner before the outdoor air becomes hot, to avoid an initial period of discomfort while the unit is

cooling the room.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

FOR YOUR SAFETY: Read these instructions carefully before operating the unit.

ENERGY

SAVING TIPS

Air Filter

Cabinet

Air Filter

Exterior

Air Inlet

Cabinet

Interior Air Inlet

Control Panel

Interior Air Outlet

INSTALLATION INSTRUCTIONS

TOOLS NEEDED FOR INSTALLATION:

• Screwdrivers: Phillips and ﬂat head.

• Power Drill: 1/8” (3.2mm) diameter drill bit

• Pencil

• Measuring Tape

• Scissors

• Carpenter’s Level

NOTE: Save the shipping carton and packing materials for future storage or transportation. From

the carton, remove the plastic bag containing the installation hardware kit necessary for the instal-

lation of your air conditioner. Please check the contents of the hardware kit against the corre-

sponding model check list, prior to installation of the unit. See Fig. 1.

ELECTRIC SHOCK HAZARD

To avoid the possibility of personal

injury, disconnect power to the unit

before installing or servicing.

NOTE: Your RoomAir Conditioner is designed for easy

installation in a single or double-hung window. This unit

is NOTdesigned for vertical (slider type) windows and/or

through-the-wall applications.

Because the compressor is located on the controls side of the unit (left side), this side

will be heavier and more awkward to manipulate. Inadequate support on control side of

the unit can result in personal injury and damage to your unit and property. Therefore, it

is recommended that you have someone assist you during the installation of this unit.

CAUTION

INSTALLATION

HARDWARE

1/2in. (13 mm)

screws (7) Safety Lock (1)

3/8in. (9.5mm) screws

(4) *Factory installed

on some models

“L” Shaped

mounting

bracket (1)

* Factory installed

on some models

Sash bracket (2)

Adhesive

Foam Seal(1)

Side Curtain LH (1)

Side Curtain RH (1)

Regular

Foam Seal(1)

Fig. 1

1. This room air conditioner is designed to ﬁt easily into a single or double hung window. However, since window designs

vary, it may be necessary to make some modiﬁcations for safe, proper installation.

2. Make sure window and frame are structurally sound and free from dry and rotted wood.

3. For maximum efﬁciency, install the air conditioner on a side of the house or building which favours more shade than

sunlight. If the unit is in direct sunlight, it is advisable to provide an awning over the unit.

4. Provide sufﬁcient clearance around the cabinet to allow for ample air circulation through the unit (See Fig. 2). The

rear of the unit should be outdoors. It should not be in a garage, or inside a building. Keep unit as far away as possi-

ble from obstacles/obstructions and at least 30” above the ﬂoor or ground. Curtains and other objects within the room

should be prevented from blocking the air ﬂow.

5. Be certain that the proper electrical outlet is within reach of the installation. Use only a single outlet circuit rated at 15

amps. All wiring should be in accordance with local and national electrical codes.

6. DO NOT install unit where leakage of combustible gas is suspected. Your air conditioner may fail to operate in air

containing oils (including machine oils), sulﬁde gas, near hot springs, etc.

NOTE: Your unit is designed to evaporate condensation under normal conditions. However, under extreme humidity con-

ditions, excess condensation may cause basepan to overﬂow to the outside. The unit should be installed where conden-

sation run-off cannot drip on pedestrians or neighbouring properties.

INSTALLATION INSTRUCTIONS

LOCATION

Awning

Fence,

wall, or

other

obstacle

Ground

Side

Obstruction

20”

Min

30”

Min

20”

Min

12” Min

Fig. 2

INSTALLATION INSTRUCTIONS

ASSEMBLY AND

INSTALLATION

1. Assembly of the upper channel to the cabinet (factory installed on some units).

•“L” Shaped Top Channel: install the “L” shaped channel to the top of the cabinet as shown in Fig. 3, using four (4) 3/8”

screws.

2. Assembly of the side curtains to the cabinet.

•Extend the shutter from the shutter frame and slide it into the shutter tabs on the side channel of the air conditioner,

as shown in Fig. 4.

•Slide the shutters into the top (“L” shaped) and bottom (“U” shaped) channels. The shutters are identiﬁed (on frame)

as left and right.

3/8” screws

“L” shaped mounting

bracket

“U” shaped Channel

(Factory Installed)

Fig. 3

Slide down into tabs

Shutter tabs

Shutter

Shutter frame

Fig. 4

3. Completing the installation.

•Carefully place the air conditioner into the window with the “L” shaped mounting bracket (on top) positioned in front

of the upper window sash. The bottom of the cabinet should be positioned on the “recessed” portion of the window

frame. Pull the window down until it rests just behind the front ﬂange of the (top) “L” shaped mounting bracket (See

Fig. 5).

•Expand the shutter frames (fully) on each side and secure the top of the frames to the window sash using one 1/2”

screw on each side and one in the “L” shaped mounting bracket (Fig. 5).

•Secure the shutter clamp on each side of the lower part of the shutter, and secure to window sill using one 1/2” screw

on each side (Fig. 5).

•Place the second foam sealing strip to ﬁt the opening between the inside and outside windows, then attach the safety

lock to the outside window frame using one 1/2” screw (See Fig. 6).

PLEASE NOTE: Window applications come in a variety of different styles. Therefore, it may be necessary to modify your

particular installation.

Window sash

“L” Shaped

Mounting

Bracket

Shutter clamps

1/2” screws

Safety Lock

1/2” screw

Foam Seal

(adhesive)

Fig. 6Fig. 5

•Cut the foam (non adhesive) sealing strip to fit the area of the window sill that the air conditioner will rest on.

OPERATING INSTRUCTIONS

CONTROLS

SELECTOR SWITCH: The selector switch controls cooling mode. Simply rotate the SELECTOR knob to one of the two

settings described below.

COOLING MODES:

• LOW COOL provides cooling with minimum air circulation. Recommended for night-time use.

• HIGH COOL provides cooling with maximum air circulation. Recommended for quick cooling or for extremely hot

days. Once room is cooled, reduce setting to LOW COOL.

• OFF shuts the unit down completely.

NOTE: Always allow 3 minutes before switching from one mode to another.

THERMOSTAT: The thermostat automatically controls the (compressor) cooling cycle and maintains the selected room

temperature. To set the thermostat, rotate the thermostat knob to the desired cooling setting (1 warmest - 7 coldest).

Turn the selector switch slowly, allowing the unit to adjust.

When using THERMOSTAT, be sure to allow three minutes

before changing the temperature. Adjusting too quickly may

cause compressor to overload.

IMPORTANT

Thermostat

OFF

arrêt

Selector

Switch

Check that the air conditioner is tilted downwards to the outside, about

3° to 4°, as shown in Fig. 7. After proper installation, condensed water

should not drain from the overﬂow drain hole during normal use. If you

notice water leaking out, check the angle of tilt, and make any neces-

sary adjustments. However, on a very humid day, water leakage can

occur – this is normal.

Measure the tilt angle from the cabinet’s edge. The distance H should

be approximately 5/8” to 3/4”.

ASSEMBLY AND INSTALLATION

Measure the tilt angle from the cabinet’s edge

WINDOW

: approximately

5/8” to 3/4”

Fig. 7

Inhaltsverzeichnis

Sprachen:

Andere Danby Klimaanlage Handbücher

Danby

Danby DPA100D1MDD Bedienungsanleitung

Danby

Danby DPA100HE5WDB-6 Bedienungsanleitung

Danby

Danby DPAC10010 Montageanleitung

Danby

Danby DPAC7297 Bedienungsanleitung

Danby

Danby DAC6011E Montageanleitung

Danby

Danby DPA140E1BDB-6 Bedienungsanleitung

Danby

Danby Premiere DPA100A1GP Montageanleitung

Danby

Danby DDR586R Bedienungsanleitung

Danby

Danby ArcticAire AAC7340D Bedienungsanleitung

Danby

Danby Premiere DPAC12012P Montageanleitung

Danby

Danby DAC5020 Bedienungsanleitung

Danby

Danby DAC145EB6WDB-6 Bedienungsanleitung

Danby

Danby DAS120GAHWDB Bedienungsanleitung

Danby

Danby Designer DPA100A1GD Bedienungsanleitung

Danby

Danby DAC080EB3GDB Montageanleitung

Danby

Danby DAC5002D Bedienungsanleitung

Danby

Danby Designer DAC6003D Bedienungsanleitung

Danby

Danby DAC5111M Montageanleitung

Danby

Danby DAC080ECB3GDB Montageanleitung

Danby

Danby DAC080ECB2GDB Montageanleitung

Danby

Danby DPA053B4WDB-RF Bedienungsanleitung

Danby

Danby DPAC8KBLDB Bedienungsanleitung

Danby

Danby Premiere DPAC12010H Montageanleitung

Danby

Danby Diplomat DAC7037M Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung