Danby DPA120BCCWDB Montageanleitung

2016.11.24

DPA120BCCWDB / DPA120BEUWDB

PORTABLE AIR CONDITIONER

CLIMATISEUR PORTATIF

OWNER’S USE AND CARE GUIDE

GUIDE D’UTILISATION ET D'ENTRETIEN

MODEL • MODÈLE

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF

PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE

REFERENCE.

POUR OBTENIR LE SERVICE SUR GARANTIE, VOUS DEVEZ FOURNIR UNE

PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE

POUR RÉFÉRENCE FUTURE.

This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must

be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and

applicable local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the

responsibility and obligation of the customer to exchange the existing receptacle in accordance with the

National Electrical Code and applicable local codes and ordinances. The third ground prong should not,

under any circumstances, be cut or removed. Never use the cord, the plug or the appliance when they show

any sign of damage. Do not use your appliance with an extension cord unless it has been checked and test-

ed by a qualiﬁed electrician or electrical supplier.

IMPORTANT - GROUNDING METHOD

Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ﬁches. Il doit être

branché dans une prise avec une ﬁche de mise à la terre en conformité avec le Code national de l’électricité

et les codes et règles locaux applicables. Si la prise murale n’a pas de mise à la terre, il est de la

responsabilité et l’obligation du client de changer la prise existante pour la rendre conforme au Code

national de l’électricité et aux codes et règles locaux applicables. La ﬁche de mise à la terre ne doit pas, en

aucune circonstance, être coupée ou retirée. Si vous apercevez des signes de dommage, n’utilisez jamais le

cordon d’alimentation, la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été

vériﬁée et testée par un électricien qualiﬁé ou un fournisseur de matériel électrique.

IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

PORTABLE AIR CONDITIONER

Owner’s Use and Care Guide ................................1-15

• Welcome

• Important Safety Information

• Features

• Installation Instructions

• Operation Instructions

• Care and Maintenance

• Troubleshooting

• Warranty

CLIMATISEUR PORTATIF

Guide d’utilisation et d’entretien............................16-30

• Bienvenue

• Consignes de sécurité importantes

• Caractéristiques

• Consignes d’installation

• Consignes d’utilisation

• Soins et entretien

• Dépannage

• Garantie

CONTENTS / TABLE DES MATIÈRES

CAUTION:

Read and follow all safety rules and operating

instructions before ﬁrst use of this product.

AVERTISSEMENT :

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

WARNING

Improper connection of the grounding plug can

result in risk of ﬁre, electric shock and/or injury to

persons associated with the appliance. Check with

a qualiﬁed service representative if in doubt that

the appliance is properly grounded.

AVERTISSEMENT

Une ﬁche de mise à la terre mal branchée peut

entraîner un risque d’incendie, de choc électrique

ou de blessures aux personnes qui utilisent

l’appareil. Si vous n’êtes pas certain que l’appareil

est correctement mis à la terre, consultez un

préposé du service qualiﬁé.

Model • Modèle

DPA120BCCWDB / DPA120BEUWDB

Welcome

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will

find in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best

of all, you will experience these values each and every time you use your Danby appliance. That is important, because

your new appliance will be a part of your family for a long time.

Note the information below; you will need this information to obtain service under warranty.

To receive service, you must provide the original receipt.

Model Number:

Serial Number:

Date of Purchase:

NEED HELP?

Before you call for service, here are a few things you can do to help

us serve you better:

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your

appliance properly.

If you received a damaged appliance:

Immediately contact the retailer (or builder) that sold you the

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide before call-

ing. This section helps you solve common problems that may occur.

If you do need service, you can relax, knowing help is only a phone

call away.

1-800-26-

(1-800-263-2629)

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

SAFETY PRECAUTIONS

ALWAYS DO THIS

Your air conditioner should be used in such a way that it is protected from moisture, e.g. condensation,

splashed water, etc. Do not place or store your air conditioner where it can fall or be pulled into water or

any other liquid. Unplug unit immediately if this occurs.

Always transport your air conditioner in a vertical position and place on a stable, level surface during use.

If the unit is transported laying on its side it should be stood up and left unplugged for 6 hours.

Turn off the unit when not in use.

Always contact a qualiﬁed person to perform repairs. If the power cord is damaged it must be repaired by

a qualiﬁed technician.

Keep the unit away from walls, furniture and curtains with a clearance of at least 30 cm all around.

If the air conditioner is knocked over during use, turn off the unit and unplug it immediately.

Always use the switch on the control panel to turn the unit on or off.

NEVER DO THIS

Do not operate your air conditioner in a wet room such as a bathroom or laundry room.

Do not touch the unit with wet or damp hands.

Do not press the buttons on the control panel with anything other than your ﬁngers.

Do not remove any ﬁxed components. Never use this appliance if it is not working properly, or if it has

been dropped or damaged.

Never use the plug to start and stop the unit.

Do not cover or obstruct the inlet or outlet grilles.

Do not use hazardous chemicals to clean or come into contact with the unit.

Do not use the unit in the presence of inﬂammable substances or vapour such as alcohol, insecticides,

gasoline, etc.

Do not allow children to operate the unit unsupervised.

Do not use this product for functions other than those described in this instruction manual.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

ENERGY SAVING TIPS

OPERATING

CONDITIONS

TOOLS FOR WINDOW KIT

INSTALLATION

• Use the unit in the recommended room size.

• Locate the unit where furniture cannot obstruct the air ﬂow.

• Keep blinds/curtains closed during the sunniest part of the day.

• Keep the ﬁlters clean.

• Keep doors and windows closed to keep cool air in and warm air out (cooling mode)

The air conditioner must be operated within the temperature range

indicated below:

Note: Performance may be reduced outside of these operating temperatures.

1. Screwdriver (medium size, Phillips)

2. Tape measure or ruler

3. Knife or scissors

4. Saw (In the event that the window kit needs to be cut down in size

because the window is too narrow for direct installation).

See www.danby.com for general instruction guide

Identifying Parts

WARNING

• Do not store or use gasoline or other ﬂammable vapours and liquids in the vicinity of this or any other

appliance.

• Avoid ﬁre hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any

prong from the power cord.

ELECTRICAL INFORMATION

WARNING

• Be sure the electrical supply is adequate for the model you have chosen. This information can be found

on the serial plate, which is located on the side of the cabinet and behind the grille.

• Be sure the air conditioner is properly grounded. To minimize shock and ﬁre hazards, proper grounding

is important. The power cord is equipped with a three-prong grounding plug for protection against

shock hazards.

• Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you

intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a

qualiﬁed electrician install the proper receptacle.

• Ensure the receptacle remains accessible after the unit is installed.

MODE ROOM TEMPERTURE

Cool 17°C (62°F) ~ 35°C (95°F)

Dry 13°C (55°F) ~ 35°C (95°F)

NOISE RATING Under normal conditions your unit will operate at roughly 45dB.

POWER OUTAGE In the case of a power outage, the unit will automatically re-start with the last setting

after the power is restored.

Wait 3 minutes before resuming operation

After the unit has stopped, it cannot operate for the ﬁrst 3 minutes. This is to protect

the unit. Operation of the compressor will automatically start after 3 minutes.

Identifying Parts

ACCESSORIES

Ensure that all the accessories are

included in the package and refer to

the installation instructions for their

usage.

Note: All the illustrations in this

manual are for explanatory

purposes only. Your air conditioner

may be slightly different.

UNIT STRUCTURE

Features

ELECTRONIC CONTROL INSTRUCTIONS AND OPERATING MODES

3sec

Swing Button: Press to start the auto swing feature. When auto swing is activated, press again to stop the louver at

the desired angle.

Fan Button: Press to select fan speed; normal or high. Light will indicate current speed.

Timer Button: Press to start theAuto-on or Auto-off features. Light will indicate whether a timer is set.

Sleep / Filter Button: Press to start the Sleep feature. Also used to reset the ﬁlter after 250 hours of operation.

- Press the SLEEP button to begin SLEEP mode

- The temperature will increase by 2 degrees from set temperature over a 2 hour period

- The unit will hold the new temperature for 7 hours and then will return to the set temperature

- The ﬁlter light will illuminate after 250 hours of use as a reminder to clean the ﬁlter; to reset the ﬁlter after cleaning,

hold the SLEEP button for 3 seconds

Mode Button: Press to select the desired mode. Modes will cycle in sequence with each press of the button; AUTO,

COOL, DRY, FAN. Light will indicate current mode.

AUTO mode

- press the mode button until the AUTO icon illuminates.

- Press the UP or DOWN arrow buttons to select the desired room temperature

- The unit will automatically select cooling and fan speed based on ambient temperature.

COOL mode Note: The hose should be exhausted during COOL mode

- Press the mode button until the COOL icon illuminates

- Press the UP or DOWN arrow buttons to select the desired room temperature

- The temperature can be set within a range of 17-30°C / 62-86°F

- Press the fan button to choose the fan speed

DRY mode

- Press the mode button until the DRY icon illuminates

- Press the UP or DOWN buttons to select the desired room humidity

- The humidity can be adjusted in 5% increments between 35% and 85%

- The fan speed will remain on normal in DRY mode and cannot be adjusted

FAN mode

- Press the mode button until the FAN icon illuminates

- Press the fan button to choose the fan speed

Up and Down Buttons:

- Press and hold both Up and Down buttons for 3 seconds to change the temperature display from °C to °F.

Power Button: Press to turn the unit on or off.

LED Display: Shows the set temperature in °C or °F or the auto-timer settings. While on DRY mode shows the rela-

tive humidity. When on FAN mode shows the room temperature.

Operating Instructions

OPERATING MODES

Timer Operation

To set the Auto-off timer:

• Ensure the unit is turned on

• Press the TIMER button and the Timer Off indicator light will illuminate

• Press the UP or DOWN buttons to select the desired amount of hours before the unit turns off

To set the Auto-on timer:

• Ensure the unit is turned off

• Press the TIMER button and the Timer On indicator light will illuminate

• Press the UP or DOWN buttons to select the desired amount of hours before the unit turns on

Notes:

• The UP and DOWN buttons will increase or decrease the time in 0.5 hour increments up to 10 hours and then in 1

hour increments up to 24 hours

• The display will revert back to showing the previous temperature setting if the unit does not receive a signal within a 5

second period during programming

• Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 hours will cancel the Auto-timer settings

Using the Auto-on and Auto-off feature at the same time

You can set the air conditioner to turn on and run for a set period of time and then turn off again by using the Auto-on and

Auto-off features at the same time. Keep in mind that the hours displayed on the unit refer to the number of hours that will

pass from the current time before the action is taken.

For example:

• First, set the Auto-off timer

• Ensure the unit is turned on

• Press the TIMER button and the Timer Off indicator light will illuminate

• Press the UP or DOWN buttons to select the desired amount of hours before the unit turns off

• Press the Timer button again within 5 seconds and the Timer On indicator light will illuminate

• Press the UP and DOWN buttons to select the desired amount of hours before the unit turns back on

REMOTE CONTROL INSTRUCTIONS

Operating Instructions

• Use the remote control within a distance of 8 m

(26 ft.) from the appliance, pointing it towards the

receiver. Reception is conﬁrmed by a beep.

MODE: Selects mode operation

in the following order:

Auto --> Cool --> Dry --> Fan

FAN SPEED: Selects fan speed

in the following order:

Auto --> Normal --> High

ON/OFF: Turns the unit on or off

Model RG57H(B)/BGCE-M

Rated Voltage 3.0V (dry batteries R03/LR03x2)

Signal Receiving Range 8m (26 feet)

Environment -5°C to 60°C (23°F to 140°F)

TEMP

SLEEP: Conserves energy

during sleeping hours

LOUVER: Starts and stops

louver swing action

LED: Turns the LED

display on or off

TIMER OFF: Used to set

Auto-off function

TIMER ON: Used to set

Auto-on function

SHORTCUT: Sets and activates

favourite setting

SHORTCUT function (only available on remote):

- Used to save a favourite setting

- Set the unit to the temperature and fan speed that you would like to set as a favourite

- Press and hold the SHORTCUT button for 2 seconds

- Press the SHORTCUT button at any point in future to return to the favourite setting

- If no favourite is set, pressing the SHORTCUT button will cause the unit to run in AUTO mode at

29°C (79°F), with fan speed set to AUTO

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Danby Klimaanlage Handbücher

Danby

Danby DPA140HEAUBDB Montageanleitung

Danby

Danby dac10507ee Bedienungsanleitung

Danby

Danby DPA072B8WDB-6 Bedienungsanleitung

Danby

Danby Simplicity SPAC5088 Bedienungsanleitung

Danby

Danby DPA100HB1BDB-6 Bedienungsanleitung

Danby

Danby DPAC11007 Bedienungsanleitung

Danby

Danby DAC060EB4WDB Bedienungsanleitung

Danby

Danby DAC080EB6WDB Bedienungsanleitung

Danby

Danby dac10007ee Bedienungsanleitung

Danby

Danby DPA100E5WDB-RF Bedienungsanleitung

Danby

Danby DPA060C2WDB Montageanleitung

Danby

Danby DAC080BHUWDB Bedienungsanleitung

Danby

Danby DPSL120B1W Bedienungsanleitung

Danby

Danby DDR556RH Bedienungsanleitung

Danby

Danby DHCC6020 Bedienungsanleitung

Danby

Danby DPA120CB5BP Montageanleitung

Danby

Danby DAC060EUB7GDB Montageanleitung

Danby

Danby DPA140HB1BDB-6 Bedienungsanleitung

Danby

Danby DAC12078EE Bedienungsanleitung

Danby

Danby DAC080BAUWDB Montageanleitung

Danby

Danby DPA100B2WDB Montageanleitung

Danby

Danby DPAC10030 Bedienungsanleitung

Danby

Danby Premiere DPAC9009 Bedienungsanleitung

Danby

Danby Simplicity SPAC8499 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung