Danby DPA120E3WDB-6 Bedienungsanleitung

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840

OWNER’S MANUAL

MANUEL DU PROPRIÉTAIRE

MANUAL DEL PROPIETARIO

www.Danby.com

PORTABLE AIR CONDITIONER

Owner’s Manual.............................1 - 12

CLIMATISEUR PORTABLE

Manuel du propriétaire.................13 - 24

AIRE ACONDICIONADO PORTÁTIL

Manual del propietario.................25 - 36

MODEL •MODÈLE •MODELO

DPA120E3WDB-6

DPA140E3WDB-6

2018.12.18

PTAC DIRECT SALES, INC.

185 South Kimball Ave., Suite 130

Southlake, TX 76092

877.454.7822

www.PTACdirect.com

Welcome

Welcome to the Danby family. We are proud of our quality products and we believe in

dependable service. We suggest that you read this owner’s manual before plugging in your new

appliance as it contains important operation information, safety information, troubleshooting and

maintenance tips to ensure the reliability and longevity of your appliance.

Visit www.Danby.com to access self service tools, FAQs and much more. For additional assistance

call 1-800-263-2629.

Note the information below; you will need this information to obtain service under warranty.

You must provide the original purchase receipt to validate your warranty and receive service.

Model Number: _________________________________________________

Serial Number: _________________________________________________

Date of Purchase: _______________________________________________

Need Help?

Before you call for service, here are a few things you can do to help us serve you better.

Read this owner’s manual:

It contains instructions to help you use and maintain your appliance properly.

If you receive a damaged appliance:

Immediately contact the retailer or builder that sold you the appliance.

Save time and money:

Check the troubleshooting section at the end of this manual before calling. This section

will help you solve common problems that may occur.

1-800-26- Danby

(1-800-263-2629)

SAFETY REQUIREMENTS

This appliance is not intended for use by persons

(including children) whose physical, sensory or

mental capabilities may be different or reduced,

or who lack experience or knowledge, unless such

persons receive supervision or training to operate

the appliance by a person responsible for their

safety.

Children should be supervised to ensure that they

do not play with the appliance.

To avoid risk of electric shock, do not operate this

appliance in an area that is likely to accumulate

standing water. If this condition develops, disconnect

the power supply before stepping into the water.

Do not store or use combustible materials such as

gasoline or other ﬂammable vapors or liquids in the

vicinity of this or any other appliance.

Do not insert ﬁngers or other objects into grills or

openings in the appliance.

Do not cover or block the intake and exhaust

openings.

Do not operate the appliance without the ﬁlter

installed.

Do not operate the appliance near heat sources.

This appliance is intended for indoor, residential

applications only. Do not use this appliance

outdoors. Do not use this appliance for commercial

or industrial applications.

If the air conditioner is transported on its back or

side, it must be allowed to stand upright for 6 hours

before plugging in to avoid damage to internal

components.

Keep the appliance away from walls, furniture and

curtains with a clearance of at least 30 cm (12

inches) on all sides.

GROUNDING INSTRUCTIONS

This appliance must be grounded. Grounding

reduces the risk of electrical shock by providing an

escape wire for the electrical current.

This appliance has a cord that has a grounding

wire with a 3-prong plug. The power cord must be

plugged into an outlet that is properly grounded.

If the outlet is a 2-prong wall outlet, it must be

replaced with a properly grounded 3-prong wall

outlet. The serial rating plate indicates the voltage

and frequency the appliance is designed for.

WARNING - Improper use of the grounding

plug can result in a risk of electric shock.

Consult a qualiﬁed electrician or service agent

if the grounding instructions are not completely

understood, or if doubt exists as to whether the

appliance is properly grounded.

Do not connect the appliance to extension cords,

adapters or together with another appliance in the

same wall outlet.

Do not splice the power cord. Do not under any

circumstances cut or remove the third ground prong

from the power cord.

If the power supply cord is damaged, it must be

replaced by the manufacturer, its service agent or

similar qualiﬁed person in order to avoid hazard.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS!

INSTALLATION INSTRUCTIONS

REQUIRED TOOLS

1. Medium sized Phillips screwdriver

2. Tape measure or ruler

3. Knife or scissors

4. Saw (in the event that the window sliders need to

be cut to size)

ASSEMBLING THE WINDOW KIT

1. Attach the air outlet adapter and the window

slider adapter onto either end of the exhaust

hose.

2. Insert the air outlet adapter into the back of the

appliance by placing over the air exhaust and

then twisting in the direction of the arrow to lock

into place.

3. Measure the window opening where the window

kit will be installed. Assemble as many sliders as

necessary to ﬁt the window.

4. If the length of the window requires all three

sliders, use two bolts to fasten the sliders at the

correct length.

5. If the window opening is less that the minimum

length of a single slider, use the slider that has

the hole in it and cut it to the correct length.

Make sure not to cut the end that has the hole

as this is necessary to attach the exhaust hose

adapter.

ACCESSORIES

1. Air outlet adapter

2. Exhaust hose

3. Window slider adapter

4. 8 Bolts

5. Window slider A

6. Window slider B and C

7. Foam seal A and B (adhesive)

8. Foam seal C (non-adhesive)

9. Remote control and batteries

INSTALLATION INSTRUCTIONS

INSTALLING THE WINDOW KIT

The window kit can be used in either a hung

window or a sliding window application. The

images at the right are for a hung window. The

steps for a sliding window are the same.

1. Cut the adhesive foam seals A and B to the

correct length for the window. Attach them to the

window sash and frame as shown.

2. Insert the assembled window slider kit into the

window opening.

3. Cut the non-adhesive foal seal C to match

the width of the window. Insert the foam seal

between the glass and the window frame to

prevent air and insects from getting into the

room.

4. Attach the window slider adapter to the hole in

the window slider kit.

Note: It may be easier to attach the window slider

adapter to the window slider kit before placing the

kit in the window.

Note: Do not over extend or bend the hose as this

will impede air ﬂow.

OPERATING INSTRUCTIONS

FEATURES

Front

1. Control panel

2. Louver

3. Display

4. Handle (both sides)

5. Air intake

6. Casters

LOCATION

Place the air conditioner on a smooth, level ﬂoor

that is strong enough to support it and all included

accessories.

Make sure the appliance is level to minimize noise

and vibration.

The appliance must be installed near a grounded

receptacle and the overﬂow drain outlet on the rear

of the appliance must be accessible.

Do not cover air inlets or outlets or the remote

control receiver on the control panel.

The appliance requires 45 cm (17.7 inches) of

clearance on the front and sides.

The appliance requires at least 50 cm (20 inches) of

clearance on the back.

Rear

1. Remote control holder

2. Air intake

3. Air outlet

4. Air intake

5. Drain

6. Power cord

OPERATING INSTRUCTIONS

1. Fan button: Used to set the fan speed; low,

medium, high and auto.

2. Decrease button: Used to decrease the set

temperature.

3. Increase button: Used to increase the set

temperature.

4. Mode button: Used to choose the mode; cool,

fan or dry. Press and hold the mode button for

20 seconds to change the temperature scale

between Celsius and Fahrenheit.

5. Power button: Used to turn the appliance on or

off.

Note: Certain functions can only be accessed

through the remote control.

CONTROL PANEL

1 2 3 4 5

DISPLAY PANEL

1. Temperature, time and icon display

2. Cool mode indicator

3. Temperature scale indicator

4. Timer indicator

5. Fan speed indicator

• Low fan is indicated by one bar.

• Medium fan is indicated by two bars.

• High fan is indicated by three bars.

• Auto fan speed is indicated by cycling bars.

OPERATING MODES

Cool Mode

Choose cool mode to set the cooling function.

• Press the mode button until the snowﬂake icon

appears on the display.

• Use the increase and decrease buttons to choose

the desired temperature.

• Use the fan button to choose the desired fan

speed.

• The temperature can be set within a range of 18

- 32°C (64 - 90°F).

• The exhaust hose should be installed during cool

mode to ensure the best results.

Dry Mode

Choose dry mode to remove excess moisture from

the air during periods of high humidity.

• Press the mode button until the “dh” symbol

appears on the display.

• The fan speed will be set to auto.

• The exhaust hose should be installed during cool

mode to ensure the best results.

• It may be necessary to install the continuous

drain hose during dry mode to remove excess

water.

Fan Mode

Choose fan mode to run the internal fan without

engaging the cooling function.

• Press the mode button until the fan icon appears

on the display.

• Press the fan button to choose the desired fan

speed: low, medium or high.

• The exhaust hose does not need to be installed

during fan mode.

OPERATING INSTRUCTIONS

REMOTE CONTROL

1 2 3

45 6

789

1. Fan button: Used to set the fan speed; low,

medium, high or auto.

2. Increase button: Used to increase the set

temperature.

3. Mode button: Used to choose the mode; cool,

fan or dry.

4. Swing button: Used to set the angle of the louver

on the top of the appliance.

• Press once to begin the swing function.

• Press a second time to stop the louver when it

has reached the desired angle.

5. Decrease button: Used to decrease the set

temperature.

6. Timer button: Used to set the timer function.

7. Sleep button: Used to set the sleep function.

8. Power button: Used to turn the appliance on or

off.

9. °C/°F button: Used to change the temperature

scale between Celsius and Fahrenheit.

Note: The remote control will function within a

range of 7 meters (23 feet) of the appliance.

TIMER FUNCTION

The timer function can be used to turn the appliance

on or off after a period of time to conserve energy.

The timer function can only be activated by the

remote control.

To set the timer to turn the appliance off:

1. While the appliance is running, press the timer

button. The time display will ﬂash.

2. Press the timer button to choose the number of

hours before the appliance will turn off.

3. Wait 5 seconds to conﬁrm the setting. The timer

icon will show on the display panel.

To set the timer to turn the appliance on:

1. Turn the appliance on and choose the desired

mode and settings. Turn the appliance off.

2. While the appliance is turn off, press the timer

button. The time display will ﬂash.

3. Press the timer button to choose the number of

hours before the appliance will turn on.

4. Wait 5 seconds to conﬁrm the setting. The timer

icon will show on the display panel.

Notes: Turning the appliance on or off at any time

or adjusting the timer setting to 0 hours will cancel

the timer settings

SLEEP FUNCTION

The sleep function can be used to conserve energy

during sleeping hours. The sleep function can only

be used during cool mode.

When selected, the set temperature will increase by

1 degree per hour for 2 hours. The appliance will

hold the new set temperature for 6 hours before

automatically returning to normal operation.

The sleep function can only be activated with the

remote control and can be canceled at any time by

pressing the sleep button.

OPERATING INSTRUCTIONS

REMOTE CONTROL BATTERIES

The remote control will ship with a battery already

installed. To use the remote for the ﬁrst time, remove

the transparent insulating strip from the battery

housing by gently pulling it out.

The remote control uses battery type CR2025.

To replace the remote battery, follow the steps

below:

1. Use a pin or similar item to press into the hole

on the battery cover on the back of the remote

control. While pressing down with the pin, push

the battery cover out.

2. Remove the old battery from the battery cover

and replace with a new battery of the same

type. Replace the battery cover in the remote

control by pushing inward until it clicks into

place.

IMPORTANT

Do not dispose of batteries as unsorted municipal

waste. Refer to local laws for proper disposal of

batteries.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation.

If this equipment does cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and on, the

user is encouraged to try to correct the interference

by one or more of the following measures:

1. Reorient or relocate the receiving antenna

2. Increase the separation between the equipment

and receiver

3. Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected

4. Consult the dealer or an experienced radio/TV

technician for help

Changes or modiﬁcations not approved by the

party responsible for FCC compliance could void

the user’s authority to operate the equipment. This

appliance complies with Part 15 of the FCC Rules.

Operation is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference

received, including interference that may cause

undesired operation.

This device complies with Canadian CAN ICES-3

(B) / NMB-3 (B)

OPERATING INSTRUCTIONS

WATER DRAINAGE

When the internal drain pan becomes full the

appliance will stop operating and the display

will show error code “Ft”. The air conditioning or

dehumidifying action will stop but the fan may

continue to operate.

Drain Plug

1. Turn the appliance off and unplug it from the

power source.

2. Carefully move the appliance to a location

where the water can be drained.

3. Remove the drain plug and allow the water to

completely drain.

4. Replace the bottom drain plug, pressing ﬁrmly to

ensure a tight ﬁt and no leaks.

5. The “Ft” error symbol will disappear and the

appliance will resume regular function once

power is restored.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Danby Klimaanlage Handbücher

Danby

Danby DPA120E1WDB-6 Bedienungsanleitung

Danby

Danby Designer DAC6003D Bedienungsanleitung

Danby

Danby DPA120HEAUBDB Bedienungsanleitung

Danby

Danby Silhouette DAC7024DE Bedienungsanleitung

Danby

Danby DPA120B8WDB-6 Bedienungsanleitung

Danby

Danby DPA060B7WDB Bedienungsanleitung

Danby

Danby DAS120GAHWDB Bedienungsanleitung

Danby

Danby DAC150EB2WDB Bedienungsanleitung

Danby

Danby DPAC120090 Montageanleitung

Danby

Danby DAC080BFCWDB Bedienungsanleitung

Danby

Danby DPAC5011 Montageanleitung

Danby

Danby DAC 5209M Montageanleitung

Danby

Danby Diplomat DAC5040 Bedienungsanleitung

Danby

Danby Designer DPAC120068 Bedienungsanleitung

Danby

Danby DPA100D1MDD Bedienungsanleitung

Danby

Danby Designer DPAC8020 Bedienungsanleitung

Danby

Danby DAC050MB2WDB Bedienungsanleitung

Danby

Danby DPAC6507 Bedienungsanleitung

Danby

Danby Premiere DPAC 13009 Montageanleitung

Danby

Danby DAC060ECB4GDB Montageanleitung

Danby

Danby DAC9006DE Bedienungsanleitung

Danby

Danby DAC100EB9WDB Bedienungsanleitung

Danby

Danby Simplicity SPAC5088 Bedienungsanleitung

Danby

Danby DPAC7297 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung