Danby DFF103A4WDB Montageanleitung

Model • Modèle • Modelo

29.07.14

• Owner’s Use and Care Guide

• Guide d’utilisation et soin de Propriètaire

FROST FREE REFRIGERATOR

REFRIGÉRATEUR SANS GIVRE

Danby Products Limited, Ontario, Canada N1H 6Z9

Danby Products Inc., Findlay, Ohio, USA 45840

Model •Modèle DFF103A4WDB

FROST FREE REFRIGERATOR

Owner’s Use and Care Guide ............................

•Welcome

•Safety Instructions

•Installation Instructions

•Operating Instructions

•Care and Maintenance

•Troubleshooting

•Warranty

REFRIGÉRATEUR SANS GIVRE

Guide d’utiliser et soin de propriètaire .............

•Beinvenue

•Consignes de Sécurité Important

•Instructions d’installation

•Consignes d’utilisation

•Soins et entretien

•Dépannage

•Garantie

Contents

Tables des maitères

1- 9

10-18

CAUTION:

PRECAUTION:

Read and follow all safety rules and

operating instructions before first use of this

product.

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

Model •Modèle

DFF103A4WDB

Welcome

Welcome to the Danby family. We’re proud of our quality products, and we believe in dependable service like you will

find in this owner’s use and care guide, and like you will receive from our friendly customer service department. Best of

all, you will experience these values each and every time you use your Danby refrigerator. That’s important, because

your new appliance will be a part of your family for a long time.

For easy reference, may we suggest that you attach a copy of your sales receipt to this page, and note the information

below; you will need this information to obtain service under warranty.

Model No:

Serial No:

Date Purchased:

Before you call for service, there are a few things you can do to help us

serve you better.

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your appliance

properly.

If you received a damaged appliance:

Immediately contact the builder (or dealer) that sold you the

refrigerator.

Save time and money:

Check the Troubleshooting section at the end of this guide before calling.

This section helps you solve common problems that may occur.

If you do need service, you can relax knowing help is only a phone call

away.

Need Help?

Tel: 1-800-26-

(1-800-263-2629)

Important Safety Instructions

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

ELECTRICAL

REQUIREMENTS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of

electrical shock by providing an escape wire for the electrical current.

This appliance is equipped with a cord containing a grounding wire with a

grounding plug. The plug must be plugged into an outlet that is properly

installed and grounded.

An empty refrigerator is a very dangerous attraction to children.

Remove either the gasket or lid from unused appliances, or take

some other action that will guarantee it is harmless.

IMPORTANT WARNING

WARNING

Improper use of the grounding plug can result in a risk of electric

shock. Consult a qualified electrician or serviceman if the ground-

ing instructions are not completely understood, or if doubt exists

as to whether the appliance is properly grounded.

DANGER: Risk off child entrapment. Before you throw away your old

refrigerator or freezer:

•Take off the doors.

•Leave the shelves in place so that children may not easily climb in.

DON’T WAIT DO IT NOW!

DO NOT USE AN EXTENSION CORD

Use an exclusive wall outlet. Do not connect your refrigerator to exten-

sion cords or together with any other appliance in the same wall outlet.

Leave Shelves Inside and

remove doors.

Installation Instructions

1. Select a location with a strong, level floor. If the floor is not quite level,

adjust the height of the front legs accordingly, using adjustable feet.

2. Allow two (2) inches of space between the refrigerator’s back and the wall,

one inch above the refrigerator and one inch on the side.

3. Avoid any direct sunlight and heat. Direct sunlight may affect the

enamel coating. Heat sources nearby will cause higher electricity

consumption.

4. Avoid very moist places. Too much moisture in the air will cause frost to

form very quickly on the evaporator and the refrigerator will have to be

defrosted more frequently.

5. Your refrigerator is equipped with a three-prong plug and is grounded to

eliminate electrical hazards. It must be plugged into a grounded

electrical outlet.

WHERE TO PLACE

YOUR DANBY

REFRIGERATOR

Installation Instructions

NOTES:

• This appliance is intended for FREE-STANDING INSTALLATION ONLY,

and is NOT intended to be built-in.

• Before connecting this appliance to electrical power supply, leave it to

stand for approx. 24 hours, which will reduce the possibility of

malfunction in the cooling system due to transport handling.

• This appliance is approved for INDOOR USE ONLY and is NOT

intended for outdoor operation.

IMPORTANT

Install this appliance in an area where the ambient temperature is

between 55°F (13°C) and 90°F (32°C). If the temperature around the

appliance is too low or high, cooling ability may be affected.

DOOR REVERSAL

INSTRUCTIONS

The door of the refrigerator can be hinged on either side so that the direc-

tion it opens in can be changed to suit the place of installation. Refer to

the disassembly diagram and change the door hinges according to the

following steps:

IMPORTANT

Before you begin, unplug refrigerator or disconnect power.

Remove food and any adjustable door or utility bins from doors.

1. Remove the hinge cap by twisting it off.

2. Remove the upper hexagonal head screws. The freezer door can now

be removed.

3. Remove the middle hexagonal head screws. The refrigerator door can

now be removed.

4. Remove the right side leg, line it up with holes on the other side and

attach it.

5. Remove the left side leg, line it up with holes on the other side and

attach it.

6. Line up and attach the bottom hinge to the other side of the cabinet.

7. Remove the upper hinge hole plug and insert them in the holes from

which the screws were removed in Step 2.

8. Remove the middle hinge plastic cover and remount it to cover the

holes from which the screws were removed in Step 3.

9. Remove the door hole plug from the top of each door using a

screwdriver and insert in the hole on the opposite side of each door.

10. Attach the refrigerator door to the bottom hinge.

11. Rotate the middle hinge 180 degrees. Attach it to the refrigerator door

and secure it with a screw. (Do not tighten the screw completely.)

12. Attach the upper hinge to the freezer door. Attach the freezer to the

middle hinge and use the screw to attach the upper hinge. (Do not

tighten the screw completely.)

13. The direction in which the doors open has now been changed;

however, the following points should be checked:

A) Make sure both doors are on straight.

B) Make sure that there is no space between the door gasket and

the refrigerator unit itself when the doors are closed.

C) Make sure that the gasket on the hinged side is not caught

between the door and the unit when the door is opened or

closed. (If the door is forced closed when the gasket is caught,

the gasket may be damaged.)

1212

Installation Instructions

DOOR REVERSAL

INSTRUCTIONS (cont)

14. After making sure that the doors are installed correctly, tighten all the

screws holding the hinges. If they are not tightened, the doors may

slip out of position or there may be an opening between the doors and

the cabinet.

15. For models with senior living handles, remove the screws holding the

handle on the door. Remove plastic pins from the other side of the

door and insert them into the holes where the screws were removed.

Re-install the handle using the same screws that were removed from

the door handles.

FEATURES

1. Discharge Outlet for Cold Air: Since cold air

flows through this outlet into the refrigerator, be

sure to avoid blocking it with stored food.

2. Suction Inlet

3. Temperature Controls

4. Slide-Out Shelves

5. Freezer Shelf

6. Glass Shelf with Crisper

7. Interior Light

8. Interior Light Switch

9. Evaporating Tray (not shown)

10. Ice Cube Tray

11. Full-Width Door Shelves

12. 2-Liter Door Shelf

13. Adjustable Feet

Operating Instructions

Before using your refrigerator, clean it and test run it to see if it is operating

properly. If it is not, then check your electrical source. If you cannot locate

the source of the problem, contact your dealer.

1. Set the temperature control knob to the OFF position and then plug the

AC cord into an electrical outlet of 115 volt, 60Hz. The compressor

motor should not run.

2. Set the temperature control knob to the MAX position and let the

refrigerator operate for 20 minutes. The freezer should get slightly

frosted and the motor should run smoothly with a soft hum.

3. Rotate the temperature control knob counter-clockwise toward the MIN

position. Before the pointer of the temperature control knob reaches the

MIN position, the compressor motor should turn off.

This sound is caused by the refrigerant flowing into the refrigerating

device. It does not denote a malfunction.

TEST RUN YOUR

REFRIGERATOR

SOUND OF FLOWING

IS NOTICEABLE

Operating Instructions

The ice cube tray is flexible. Twist the tray to remove the ice cubes. If the

ice cube tray is frozen hard to the surface, do not use a knife or other

metal instrument to remove it because this may damage the surface.

HOW TO REMOVE ICE

CUBES FROM THE

TRAY

You can control the temperature inside your refrigerator by turning the tem-

perature control dial. Higher numbers mean greater cooling power, smaller

numbers mean less cooling power.

REFRIGERATOR

Set the temperature control dial to 3 for optimal refrigeration effects under

normal conditions. Set the temperature control dial to MAX only when rapid

cooling in your refrigerator is necessary. Be sure to set it back to 3 later

on.

TEMPERATURE

CONTROL

TEMP CONTROL

WARM COLD

Operating Instructions

FREEZER

For ordinary use, set the temperature control in the MED position. For

rapid freezing of foodstuffs or to make ice cubes in a hurry, set the knob to

the COLD position. Do not forget to set the temperature control back to

MED once the rapid freezing process has been completed.

IMPORTANT

- Do not operate your refrigerator for more than six hours at a time with

the temperature control dial set to 5 or MAX. At this setting, the

compressor will run continuously. Consequently, foodstuffs stored in the

refrigerator compartment will be frozen and frost will form on the cooling

(evaporator) unit.

- At the control dial setting of 1, the freezer compartment temperature will

not remain at a high enough level to freeze ice cream and frozen foods.

TEMPERATURE

CONTROL

FREEZER

TEMP. CONTROL

WARM - MED - COLD

ATTENTION

If the unit is turned off or unplugged., YOU MUST ALLOW THREE

(3) MINUTES BEFORE RESTARTING OR REPLUGGING THE UNIT.

The unit will not start if you attempt to restart it in less than three

(3) minutes.

Care and Maintenance

CLEANING Your refrigerator does not require any maintenance.

- Turn off your refrigerator and remove all food, shelves, trays, etc. Wash

the interior liner with a solution of two tablespoons of baking soda and a

quart of warm water. Then, rinse and wipe it out. Do not use soaps,

detergents, scouring powders, spray cleaners or the like for cleaning the

interior liner. It may cause odors in the refrigerator compartment.

- Wash the ice cube trays, drip tray and shelves in a mild detergent

solution and dry with a soft cloth.

- Wipe the exterior surface with a soft cloth dampened with soapy water

and dry it with a soft cloth. Normal appliance spray cleaners may be

used for the exterior only.

- Use only mild soap and water to clean the door gasket.

- Never use acid, chemical thinners, gasoline, benzene or the like to clean

any part of the refrigerator. Boiling water and benzene may deform or

damage the plastic parts.

Care and Maintenance

CLEANING THE

EVAPORATING TRAY

Since dust accumulated on the evaporating tray will decrease the evapora-

tion efficiency, periodically remove the tray to clean it. The evaporating tray

is attached to the back of the refrigerator. To remove it, pull it away from

the unit. After cleaning, make sure to put the tray securely back in place,

otherwise defrosted water may spill or the evaporation process may be

hindered.

UNIT IS HOT With the freezer-refrigerator in operation, it is possible that the cabinet will

feel warm at the front edges. This does not indicate trouble. It is attributa-

ble to the hot gas line design. This prevents moisture from accumulating

and has nothing to do with the storage temperature inside.

For short vacation periods, leave the control knob at the usual setting.

During longer absences (3 weeks or more);

a) remove all food.

b) disconnect from electrical outlet.

c) leave the door open to avoid possible formation of condensation,

mold, or odors.

Most power failures are corrected within an hour or two, and will not affect

your refrigerator temperatures. However, you should minimize the number

times you open the door while the power is off. During power failures of

longer duration, take steps to protect your food, for example, by placing dry

ice on top of packages.

Remove, or securely fasten down, all loose items inside the refrigerator. To

avoid damaging the leveling legs, turn them all the way into the base.

VACATION TIME

POWER FAILURE

IF YOU MOVE

Troubleshooting

Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this trou-

bleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or

Danby’s Toll Free Number 1-800-263-2629 for assistance.

1) Unit does not work.

• No power to unit.

• Power cord is unplugged.

• Wrong voltage is being used.

• Check connection of power cord at

power source.

• Plug in unit.

• Use proper voltage.

2) Refrigerator running

too frequently.

• Temperature control too cold.

• Door not closed.

• Hot food inserted.

• Doors open too long/often.

• Close proximity to heat source or direct

sunlight.

• Check/adjust settings as needed.

• Close the door securely.

• Cool food before inserting.

• Minimize door openings/duration.

• DO NOT place unit close to heat sources

or in direct sunlight.

3) Internal Temperature

too cold. • Temperature set too cold. • Check/adjust settings as needed.

4) Internal Temperature

not cold enough.

• No power to unit.

• Power cord is unplugged.

• Wrong voltage is being used.

• Temperature control too warm.

• Hot food inserted.

• Doors open too long/often.

• Air flow obstruction.

• Close proximity to heat source or direct

sunlight.

• Check connection of power cord at

power source.

• Plug in unit.

• Use proper voltage.

• Check/adjust settings as needed.

• Cool food before inserting.

• Minimize door openings/duration.

• Allow room for air to circulate around the

unit.

• DO NOT place unit close to heat sources

or in direct sunlight.

5) Freezer not cold

enough.

• Temperature control too warm.

• Door not closed.

• Hot food inserted.

• Doors open too long or too often.

• Wrong voltage is being used.

• Check/adjust settings as needed.

• Close door securely.

• Cool food before insterting.

• Minimize door openings/ duration.

• Use proper voltage.

6) Light will not work.

• No power to unit.

• Power cord is unplugged.

• Bulb is loose/needs replacing.

• Door switch is stuck.

• Check connection of power cord to

power source.

• Plug in unit.

• Tighten or replace bulb.

• Check the switch for obstructions, clean

if necessary.

PROBLEM POSSIBLE CAUSE SOLUTION

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Danby Kühlschrank Handbücher

Danby

Danby DAR044XA8BBSL Bedienungsanleitung

Danby

Danby Silhouette DAR604BL Bedienungsanleitung

Danby

Danby CONTEMPORARY CLASSIC DAR110A2LDB Bedienungsanleitung

Danby

Danby CONTEMPORARY CLASSIC DAR110A3LDB Bedienungsanleitung

Danby

Danby DCR032C3 Bedienungsanleitung

Danby

Danby DIPLOMAT DCR033BL Bedienungsanleitung

Danby

Danby DCR032A2WDD Bedienungsanleitung

Danby

Danby Designer D9505W Bedienungsanleitung

Danby

Danby DCR016A3BSLDD Bedienungsanleitung

Danby

Danby DIPLOMAT DCR032BL Bedienungsanleitung

Danby

Danby DAG026A2BDB Bedienungsanleitung

Danby

Danby DFF180E1WDB Bedienungsanleitung

Danby

Danby DCR016A3BDB Bedienungsanleitung

Danby

Danby CONTEMPORARY CLASSIC DAR026A2WDB Bedienungsanleitung

Danby

Danby DPF074V1WDB-6 Bedienungsanleitung

Danby

Danby D9504S Bedienungsanleitung

Danby

Danby DAR044A6BSLDB Bedienungsanleitung

Danby

Danby CONTEMPORARY CLASSIC DAR026A2BDB Bedienungsanleitung

Danby

Danby DFF123C2WDD Montageanleitung

Danby

Danby DCR016XA4WDB Bedienungsanleitung

Danby

Danby DAR044A5BSLDD Bedienungsanleitung

Danby

Danby Diplomat DCR033W Bedienungsanleitung

Danby

Danby Diplomat DCR017W Bedienungsanleitung

Danby

Danby DCR032C1WDB Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung