Danfoss EKA 183A Bedienungsanleitung

520H10102

Installation Guide

EKA 183A with Adaptor for ERC21x Controllers

Programming guide

DKRCC.EI.RL0.I2.02 / 520H10102 | 1© Danfoss | DCS (az) | 2015.05 Installation guide | EKA 183A

Components:

ERC 21x Controller EKA 183A Adaptor with cable assembly

Ordering Number: 080G9740

Pack Contents: EKA 183A, Adaptor with cable assembly

PC settings:

Refer to the specic documentation (DKRCC.PD.R1.06.02) for further details.

Instruction for connecting to controller:

Step 1 Step 2

Connect EKA 183A to Adaptor Connect Adaptor cable with the controller

2 |DKRCC.EI.RL0.I2.02 / 520H10102 © Danfoss | DCS (az) | 2015.05Installation guide | EKA 183A

Programming the controller:

EKA 183A is used to copy settings to an ERC21X controller.

It can also be used to copy settings from one ERC controller to another ERC controller of the same type, eg. the same

software version.

Programming steps:

EKA 183A is inserted into the controller.

The controller is connected to the electricity mains.

Steps Illustration Observations and actions

1- ashes

(checking) YELLOW

The LED will ash YELLOW when the programming is

inserted into the controller. Here it is checked whether the

data can be transferred

2 - light up constant

(await press) YELLOW

Shortly afterwards, the LED constant light up YELLOW and

the data transfer can start

3 - to write to the

controller or

to write to the

programming key

GREEN

RED

~ 1 sec

~ 4 sec

- Pressing the button on the top of EKA (1 sec) will transfer

data from the programming key to the controller

(GREEN LED ashes)

- Pressing the button on the top of EKA (4 sec) will transfer

data from the controller to the programming key

(RED LED ashes)

4 - light up constant

(transfer nished) CONSTANT

GREEN

The transfer has nished when the LED light up constant

green

Flashing red-green-red-green-red-green....... = fault.

If there is a fault indication, please check code no.,

SW version and Error code.

Refer to Technical brochure (DKRCC.PD.R1.06.02) for

more details

Note: refer to the speciﬁc documentation (DKRCC.PD.R1.06.02) for further details

Data Transfer:

Two methods (Mode A or Mode B) can be selected for transferring data. Modes may vary based on product and

connected device as in below table.

The default mode is set as ”Mode B”, which can be used for ERC 21X series only.Refer to specic documentation

(DKRCC.PD.R1.06.02) for step by step process to change the Mode for ERC 10X and ERC 11X Series.

Product Type Mode Setting for Programming Key

Plugged in Doking Station Connected to ERC product directly

ERC 10X Series Mode A Not applicable

ERC 11X Series Mode A Not applicable

ERC 21X Series Not applicable Mode B

Andere Danfoss Controller Handbücher

Danfoss

Danfoss EKC 102C Bedienungsanleitung

Danfoss

Danfoss WP75- RF Montageanleitung

Danfoss

Danfoss AK-CC55 Bedienungsanleitung

Danfoss

Danfoss VLT 6000 series Bedienungsanleitung

Danfoss

Danfoss AK-PC 772A Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 310 Installationsanleitung

Danfoss

Danfoss vlt soft starter mcd 500 Bedienungsanleitung

Danfoss

Danfoss ECL 2000 Bedienungsanleitung

Danfoss

Danfoss EKC 302A Bedienungsanleitung

Danfoss

Danfoss EIM 336 Bedienungsanleitung

Danfoss

Danfoss NovoCon S Digital Bedienungsanleitung

Danfoss

Danfoss VLT MCD 202 Bedienungsanleitung

Danfoss

Danfoss Link Hydronic Controller Bedienungsanleitung

Danfoss

Danfoss EET Series Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss VLT AutomationDrive FC 300 Bedienungsanleitung

Danfoss

Danfoss VLT 5000 Bedienungsanleitung

Danfoss

Danfoss DEVIreg 850 IV Bedienungsanleitung

Danfoss

Danfoss ERC 211 Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Bedienungsanleitung

Danfoss

Danfoss EKC 361 Bedienungsanleitung

Danfoss

Danfoss vlt aqua Leitfaden

Danfoss

Danfoss AMI 120 NL-1 Bedienungsanleitung

Danfoss

Danfoss KoolKey Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung