Danfoss BasicPlus2 Bedienungsanleitung

User Guide

BasicPlus2

Room Thermostats for Floor Heating

www.heating.danfoss.com

User Guide BasicPlus2Room Thermostats

2Danfoss Floor Heating Hydronics VUCUA212

03/2015

1 Functional Overview

Symbols Function description Symbols Function description

SET

Room temperature Away mode

Floor temperature Child safety lock

Temperature indication Power ON/OFF

SET

Set temperature Timer and program

operation

Floor heating, Active M

Mode change/check oor

temp./child safety lock/

parameters setting

Frost protection, Active < > Up/down selectors

2 Power ON/OFF

Turn the thermostat ON or OFF by pressing .

3 Setting the Temperature

• Press <or >at any time to change the desired temperature value. SET is shown in the display.

• When releasing <or >, the display returns to showing the actual temperature.

• The adjustment step is 0.5° C.

4 Select Away Mode

• Press Mto enter Away mode and will be displayed.

• Press <or >. SET appears; set the Away mode setpoint.

• Press Magain to exit Away mode.

5 Set Timer (only for WT-P and WT-PR types)

• Press ; hh ashes. Press <or >to adjust hour.

• Press again; mm ashes. Press <or >to adjust minute.

• Press again; week ashes. Press <or >to adjust week.

• Complete all adjustments. Press any button to exit (automatic exit after 6 seconds with no operation).

6 Advanced Programmable Timer (only for WT-P and WT-PR types)

The Advanced Programmable Timer mode enables the setting of a timer-controlled program for automatic

comfort temperature, and an energy-saving lower setback temperature if standard room comfort temperature is

not required.

User Guide BasicPlus2Room Thermostats

03/2015 VUCUA212 Danfoss Floor Heating Hydronics 3

The function consists of 2 programs:

P1 with 4 events in 5 days (Mon. Tue. Wed. Thu. Fri.) P2 with 4 events in 2 days (Sat. Sun.).

P1: Press to display Mo. Tu. We. Th. Fr.

P1, Event 1:

1. Use <or >to select the start time.

2. Press to accept the setting.

3. Use <or >to select the temperature.

4. Press to accept the setting.

P1, Event 2-4:

Repeat the Event 1 procedure for programming

Event 2-4.

P2: Sa. Su. are now shown in the display.

P2, Event 1:

1. Use <or >to select the start time.

2. Press to accept the setting.

3. Use <or >to select the temperature.

4. Press to accept the setting.

P2, Event 2-4:

Repeat the Event 1 procedure for programming

Event 2-4.

The thermostat will continue the 4-event program based on the present time and day.

To set and change the room temperature temporarily:

1. Press <or >at any time to change the desired temperature value. SET is shown in the display.

2. When releasing the <or >, the display returns to showing the actual temperature. This temperature change is

only temporary and will be maintained only until the next programmed setting!

A default program provides timer control if the customer does not create own programs:

Days Event 1 Event 2 Event 3 Event 4

Start time Temp. Start time Temp. Start time Temp. Start time Temp.

Mon - Fri 6:30 20° C

(27° C)* 8:30 15° C

(25° C)* 16:30 20° C

(27° C)* 22:30 15° C

(25° C)*

Sat - Sun 7:30 20° C

(27° C)* 9:30 20° C

(27° C)* 16:30 21° C

(28° C)* 22:30 15° C

(25° C)*

* Floor temperature control mode.

7 Check Floor Temperature

• Press Mand hold. Press <within 6 seconds.

• ashes and the current oor temperature is displayed. Operate again, then exit (automatic exit after 6

seconds with no operation).

8 Child Safety Lock

• Press Mand hold. Press >within 6 seconds to lock all buttons.

• Press again to exit the child safety lock.

9 Set Control Parameters

Press Mbutton for 6 seconds to enter the parameter setting mode. Press Mfor parameter selection and set the

parameter range via <or >. Complete all adjustments.

To exit WT-P/PR, press , which is available for this purpose (automatic exit after 30 seconds with no operation).

To exit WT-D/DR, wait for automatic exit (30 seconds). The upper digits indicate the parameter number.

User Guide BasicPlus2Room Thermostats

Danfoss Floor Heating Hydronics VUCUA212

03/2015

The digits indicate the set value as follows:

No. Parameter settings Settings range Default

WT-D/DR WT-P/PR

P01 Working mode 01: Manual

02: Advanced Programmable Timer NA 02

P02 Temperature control mode

01: Only room temp.;

02: Room and oor temp.;

03: Only oor temp.

01 01

P03 High room temp. limit 5-35° C (only for 01 and 02 in P02) 30° C 30° C

P04 Low room temp. limit 5-35° C (only for 01 and 02 in P02) 5° C 5° C

P05 Floor temp. limitation mode 01: High temp. limitation;

02: Low temp. limitation (only for 02 in P02) 01 01

P06 Floor temp. limitation setpoint 20-45° C (only for 02 in P02) 35° C 35° C

P07 High oor temp. limit 20-45° C (only for 03 in P02) 35° C 35° C

P08 Low oor temp. limit 20-45° C (only for 03 in P02) 20° C 20° C

P09 Frost protection 01: Enable; 02: Disable 01 01

P10 Frost protection setpoint 5-17° C 5° C 5° C

P11 Timer display option 01: 24 h; 02: 12 h NA 01

P12 Room temp. display option at

shutdown

01: No display current temp.;

02: Display current temp. 01 01

P03 to P08 appear on relevant temperature control mode.

10 Error Messages

E1 Room sensor failure

E2 Floor sensor failure

EE EEPROM failure

Lo Temperature lower than 0° C

Hi Temperature higher than 50° C

All relay output will be turned o in all cases.

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.

This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

Inhaltsverzeichnis

Andere Danfoss Thermostat Handbücher

Danfoss

Danfoss ECL Comfort 310, A302 Bedienungsanleitung

Danfoss

Danfoss ECtemp 330 Bedienungsanleitung

Danfoss

Danfoss RESD Series Bedienungsanleitung

Danfoss

Danfoss KPU 19 Bedienungsanleitung

Danfoss

Danfoss CET2000B-RF + RX1-S + CS2 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 310, A333 Bedienungsanleitung

Danfoss

Danfoss DEVIreg Opti Bedienungsanleitung

Danfoss

Danfoss RET B + RF Betriebsanleitung

Danfoss

Danfoss TP75M Bedienungsanleitung

Danfoss

Danfoss WP75-RF Bedienungsanleitung

Danfoss

Danfoss ECtemp 330 Bedienungsanleitung

Danfoss

Danfoss 103E5 Bedienungsanleitung

Danfoss

Danfoss RT 103 Bedienungsanleitung

Danfoss

Danfoss FH-RT Handbuch

Danfoss

Danfoss RET2000 B Bedienungsanleitung

Danfoss

Danfoss Living Eco Bedienungsanleitung

Danfoss

Danfoss REP24CO Bedienungsanleitung

Danfoss

Danfoss FP715Si Bedienungsanleitung

Danfoss

Danfoss TPOne-M Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss DEVIreg 531 Bedienungsanleitung

Danfoss

Danfoss CF-RP 088U0211 Bedienungsanleitung

Danfoss

Danfoss RT51 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung