Danfoss T70 2 Bedienungsanleitung

User Manual

Remote Control

T70 2 Transmitter

www.danfoss.com

Revision history Table of revisions

Date Changed Rev

January 2019 Rebranded to Danfoss Power Solutions 0101

User Manual

T70 2 Transmitter

2 | ©Danfoss | January 2019 BC292360528568en-000101

Safety instructions General safety....................................................................................................................................................................................4

Safety warnings.................................................................................................................................................................................4

Technical description Dimensions and identification.....................................................................................................................................................6

Start up.................................................................................................................................................................................................7

Maintenance Maintenance tips..............................................................................................................................................................................9

Troubleshooting............................................................................................................................................................................... 9

Charger and battery Technical specifications...............................................................................................................................................................10

Setting up the CB70 battery charger...................................................................................................................................... 10

CB70 status LEDs............................................................................................................................................................................11

Battery charging tips.....................................................................................................................................................................11

CB70 battery charger dimensions............................................................................................................................................12

User Manual

T70 2 Transmitter

Contents

©Danfoss | January 2019 BC292360528568en-000101 | 3

T70 2 general safety

The following safety instructions must be read carefully in order to install and use the product properly

and to keep it in perfect working condition and to reduce the risk of misuse.

Potential damage to operator and product.

Do not use this product on machines in potentially explosive atmospheres unless the model is ATEX/

RATEX certified to do so.

•Strictly adhere to the installation instructions contained in this document.

•Make sure that professional and competent personnel carry out the installation.

•Ensure that all site and prevailing safety regulations are fully respected.

•Make sure that this document is permanently available to the operator and maintenance personnel.

•Keep the transmission key when the set is not in use.

•On starting each working day, check to make sure that the STOP button and other safety measures

are working.

•When in doubt, press the STOP button.

•Whenever several sets have been installed, make sure the transmitter is the right one. Identify the

machine controlled on the label for this purpose on the transmitter or by using the display (in case it

has one).

•Service the equipment periodically.

•When carrying out repairs, only use spare parts from Danfoss.

T70 2 safety warnings

Potential damage to operator and product.

Follow the guidelines below to reduce risk of injury to the operator and the product.

•Use the device with the manufacturer's battery and battery charger (if applicable).

•Only allow qualified personnel to operate the equipment.

•Always set the STOP button in the off position when not in use.

•Always press STOP before plugging in tether cable (if applicable).

•Do not operate product when visibility is limited.

•Make sure product is compatible with the machine.

•Avoid knocking or dropping the product.

•Do not use the product if a failure is detected.

Changes or modifications not approved by Danfoss can void the user's authority to operate this product.

User Manual

T70 2 Transmitter

Safety instructions

4 | ©Danfoss | January 2019 BC292360528568en-000101

Quick reference precautions

User Manual

T70 2 Transmitter

Safety instructions

©Danfoss | January 2019 BC292360528568en-000101 | 5

T70 2 dimensions and identification

The illustration and list below describe dimensions, buttons, LEDs and labels of the T70 2 transmitter.

Dimensions in mm

270

1. Label for crane identification

Option: LCD Display

2. LED

3. Maneuver push button

4. Contact key

5. Start button

6. STOP button

7. Option: Range Limiter

8. External and extractable EP70 EEPROM module

9. Battery

User Manual

T70 2 Transmitter

Technical description

6 | ©Danfoss | January 2019 BC292360528568en-000101

T70 2 start up

Use the information below to properly turn the transmitter ON (OPERATION mode).

1. Place a charged battery in the transmitter. The charge must be done following the instructions of the

Battery Chargers' Manual.

2. Turn the contact key.

3. Push and pull out the STOP button.

LED will flash orange-green pulse. If the transmitter has LCD, it displays the identification of the

machine and battery level (only if it has been pre-programmed).

LED pulse

User Manual

T70 2 Transmitter

Technical description

©Danfoss | January 2019 BC292360528568en-000101 | 7

4. Press the start button. The green LED will now light to indicate the transmitter is transmitting. Once

the Tx is connected, press any maneuver button and its corresponding relay will be activated. Check

to make sure all other maneuvers work in a coherent way with the expected movements.

LED pulse

User Manual

T70 2 Transmitter

Technical description

8 | ©Danfoss | January 2019 BC292360528568en-000101

T70 2 maintenance tips

This product is designed for use in an industrial environment that may shorten the product's lifespan. Use

these tips to maximize the lifespan of the product.

•Use the hook/belt provided with the transmitter to prevent the transmitter from falling

•Do not clean the transmitter with solvents or pressurized water; use a damp cloth or soft brush for

cleaning

•If the push buttons show signs of deterioration, contact the Authorized Technical Service for repair

•Check if the battery contacts are correct, otherwise replace them.

•Ensure that the product is supplied with AAA alkaline batteries or has a rechargeable battery

•Be sure to recharge or replace battery regularly

Maintenance tips quick reference

T70 2 troubleshooting

The transmitter has status monitoring LED's which help identify irregularities. The most common signals

are contained in the table below:

Color and frequency Pulse frequency Description Action

Green | continuous Working Operate

Green | slow pulses Latency; no action has been taken for some time Press START to return to operation

mode

Red | slow pulses Low battery signal Replace or recharge battery

Red | fast pulses EEPROM module missing or corrupt Check EEPROM and reprogram if

necessary

Red | double pulses A maneuver is activated at transmitter start up process;

may indicate hardware damage if no order is active Release maneuver or replace

transmitter if necessary

Red | continuous General hardware failure Replace transmitter

User Manual

T70 2 Transmitter

Maintenance

©Danfoss | January 2019 BC292360528568en-000101 | 9

CB70 and BT06K specifications

CB70 battery charger

Specification Value

Standard AC power supply 230 Vca ± 10%, 50

Optional AC power supply 115 Vca, 60 Hz

DC power supply From 10.5 V to 35V

BT06K battery

Specification Value

Voltage 4.8 V

Capacity 600 mAh NiMH

Charging temperature From 0° to 45° C

Discharge temperature From -20° to 50° C

Autonomy 10 h (use at 50%)

Charging mode Fast (<2h) and intelligent

Weight 70.3 g

The battery is protected by an internal fuse.

Setting up the CB70 battery charger

Use the information below to properly set up the CB70 batter charger.

The battery charger has two charging compartments that can simultaneously charge two batteries.

1. Connect the charger to a power source using the cable supplied.

The red LED will switch.

User Manual

T70 2 Transmitter

Charger and battery

10 | ©Danfoss | January 2019 BC292360528568en-000101

Andere Handbücher für T70 2

Inhaltsverzeichnis

Andere Danfoss Sender Handbücher

Danfoss

Danfoss T70 2 Bedienungsanleitung

Danfoss

Danfoss IKORE B Bedienungsanleitung

Danfoss

Danfoss MBS 4201 Bedienungsanleitung

Danfoss

Danfoss MBT 9110 Bedienungsanleitung

Danfoss

Danfoss EMP 2 Bedienungsanleitung

Danfoss

Danfoss TM70 Gebrauchs- und Pflegehandbuch

Danfoss

Danfoss PTU 025 Bedienungsanleitung

Danfoss

Danfoss MBS 4201 Bedienungsanleitung

Danfoss

Danfoss BT27IK Bedienungsanleitung

Danfoss

Danfoss MBS 32 Bedienungsanleitung

Danfoss

Danfoss AKS 41 Handbuch

Danfoss

Danfoss AKS 32 Bedienungsanleitung

Danfoss

Danfoss AKS 41 Bedienungsanleitung

Danfoss

Danfoss AKS 41 Bedienungsanleitung

Danfoss

Danfoss IK3 Bedienungsanleitung

Danfoss

Danfoss MBS 1700 Bedienungsanleitung

Danfoss

Danfoss T70 1 HALL Bedienungsanleitung

Danfoss

Danfoss IK4 Bedienungsanleitung

Danfoss

Danfoss MBS 32R Bedienungsanleitung

Danfoss

Danfoss Ikargo1 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung