4
Safety Instructions
FOR YOUR OWN SAFETY, READ INSTRUCTION MANUAL BE-
FORE OPERATING MACHINE!
Caution:
• WE DO NOT RECOMMEND OPERATING MA-
CHINE WITHOUT A VACUUM SYSTEM RUN-
NING
• GRINDING DUST INHALED/INGESTED CAN BE
HARMFUL TO YOUR HEALTH.
• GRINDING PARTICALS WILL CAUSE DAMAGE
TO THE INTERNAL COMPONENTS
Caution:
WHEN USING ELECTRIC TOOLS, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED TO PREVENT THE RISK OF FIRE,
ELECTRIC SHOCK AND PERSONAL INJURY,
INCLUDING THE FOLLOWING:
• WHEN MAINTENANCE OR MACHINE
ADJUSTMENTS ARE PERFORMED ON
SHARPENER ALWAYS: Push the emergency stop
button, unplug unit from power supply and use a
“LOCK OUT” “TAG OUT” procedure.
• FOLLOW INSTRUCTIONS ENTITLED “DAREX
XT-3000 Maintenance" in this Instruction Manual.
• NEVER TOUCH INTERNAL PARTS OF THE
SHARPENER WHEN THE SHARPENER IS ON The
rotating grinding wheel can cause injury.
• USE CAUTION WHEN REPLACING THE GRIND-
ING WHEEL Follow instructions entitled “How to
change a wheel”, on page 21 of the XT-3000
Instruction Manual.
• KEEP GUARDS IN PLACE and in working order.
See Decal at left.
• REMOVE WRENCHES Always check to see that any
tools have been removed from sharpener before
turning it on.
• KEEP WORK AREA CLEAN Cluttered areas and
benches invite accidents.
• DON'T USE IN DANGEROUS ENVIRONMENT Do
not use power tools in damp or wet locations, or
expose them to rain. Do not use tools in the
presence of flammable liquids or gases.
• KEEP WORK AREA WELL LIT
• STORE EQUIPMENT in a safe place when not in
use.
• DON'T FORCE TOOL It will do the job better and
safer at the rate for which it was designed.
• USE THE RIGHT TOOL Don’t force tool or
attachment to do a job it was not designed for.
• ALWAYS USE SAFETY GLASSES Also use face or
dust mask if cutting operation is dusty. Everyday
eyeglasses only have impact resistance lenses and
they are NOT safety glasses. See Decal at left.
• AVOID ACCIDENTAL STARTING Make sure switch
is in the “OFF" position before plugging it in.
• USE RECOMMENDED ACCESSORIES Consult the
owner's manual for recommended accessories. The
use of improper accessories may cause hazards. See
Decal at left.
• CHECK FOR DAMAGED PARTS Before further use
of the tool, a guard or other part that is damaged
should be carefully checked to assure that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting and any
other conditions that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced.
• NEVER LEAVE TOOL RUNNING UNATTENDED
Turn power off.
• USE PROPER EXTENSION CORD Make sure
extension cord is in good condition. When using an
Safety Instructions
extension cord be sure to use one heavy
enough to carry the current the Drill
Sharpener will draw. An undersize cord will
cause a drop in line voltage, resulting in a
loss of power and/or overheating.
• DO NOT USE DAMAGED OR UNSHAPED
WHEELS Use grinding wheels suitable for
speed of grinder.
• THE CONTINUOUS A-WEIGHTED sound
pressure level at the operator’s ear is not
over 60dB (A).
• RISK OF INJURY DUE TO ACCIDENTAL
STARTING. Do not use in an area where
children may be present.
• THE WEIGHTED ROOT MEAN SQUARE
ACCELERATION VALUE to which the arms
are subjected to does not exceed 2.5 m/s2.
• KEEP CHILDREN AWAY. All visitors should
be kept safe distance from work area.
• MAKE WORKSHOP KID PROOF with pad-
locks or master switches.
• WEAR PROPER APPAREL. Do not wear
loose clothing, neckties, rings, bracelets or
other jewelry which may get caught in mov-
ing parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long
hair.
• DON’T OVERREACH. Keep proper footing
an balance at all times. .
• MAINTAIN TOOLS WITH CARE. Keep
tools sharp and clean for best and safest per-
formance. Follow instructions for lubricating
and changing accessories.
• DISCONNECT TOOLS before servicing,
when changing accessories, such as blades
and the like.
• NEVER STAND ON TOOL. Serious injury
could occur if the tool is tipped or if the
grinding tool is unintentionally contacted.
230v~,50Hz,6A
230v~,50Hz,8A
