Data Video DAC-100 Bedienungsanleitung

Digital Video Converter

C-

-1

Installation Guide

http://www.datavideo-tek.com

DAC-100

RCA VIDEO & AUDIO CABLE

S-VIDEO CABLE

1AC ADAPTER

AC ADAPTER

S-VIDEO CABLE

(REQUIRES RED & WHITE RCA

AUDIO CABLE)

RCA VIDEO & AUDIO CABLE

FIREWIRE

(6 PIN MALE TO 6 PIN MALE)

DAC-100

What’s in the Box?

GETTING STARTED

INSTALLATION GUIDE

MANUAL

REGISTRATION CARD

SUPPORT INFO

FIREWIRE CABLE

6 PIN MALE TO 6 PIN MALE

Audio Bit Rate Selector

Input Selector

Source Indicator

Audio

Bit Rate Indicator

S-Video

Input

Composite Video Input

Left Audio Input

Right Audio Input

S-Video Output

Composite Video Output

Left Audio Output

Right Audio Output

INPUT SIDE

OUTPUT SIDE

Dip Switches

(Behind the Plastic Cover)

AC Adapter Connector

Power Switch

MEET THE DAC-100

FireWire

Input/Output

FireWire

Input/Output

FRONT (Input)

CAPTURING

How to connect DAC-100 to capture Video from a VCR or Camcorder

1. Connect the RCA Video/audio cables from the VCR’s Line output to the input on the DAC-100.

2. Connect the FireWire cable to the DAC-100, connect opposite end to the PC or Mac’s FireWire Port.

3. Power on the DAC-100 and the VCR.

4. Start the Editing Software. (Not Supplied)

5. Press the DAC-100’s Source Button to switch it to “AV” and the A Encode Button to “16 bit”.

6. Go to the “Capture or Import” mode on the Editing software to begin capturing video to a PC or a MAC

FireWire to

PC/MAC

FireWire

PRESS

Set to “16 bit”

Set to “AV”

PRESS

SOURCE

A ENCODE

DAC-100 Input Side

CAPTURING

1. Connect the S-Video cable and RCA audio cables from the VCR’s Line output to the input on the DAC-100.

2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac’s FireWire Port.

3. Power on the DAC-100 and the VCR.

4. Start the Editing Software. (Not Supplied)

5. Press the DAC-100’s Source Button to switch it to “AV” and the A Encode Button to “16 bit”.

6. Go to the “Capture or Import” mode on the Editing software to begin capturing video to a PC or a MAC.

FireWire

S-Video

PRESS

Set to “16 bit”

Set to “AV”

PRESS

FireWire to

PC/MAC

SOURCE

A ENCODE

How to capture Video from a VCR or Camcorder

DAC-100 Input Side

EXPORTING TO

Set to “AV”

PUSH

Set to “16 bit”

1. Connect the RCA Video/audio cables from the VCR’s Line input to the output on the DAC-100.

2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac’s FireWire Port.

3. Power on the DAC-100 and the VCR.

4. Start the Editing Software. (Not Supplied)

5. Press the DAC-100’s Source Button to switch it to “DV” and the A Encode Button to “16 bit”.

6. Go to the “Export” mode on the Editing software to begin exporting video to the VCR.

FireWire

FireWire to

PC/MAC

SOURCE

A ENCODE

How to Export Video from the computer to Tape

DAC-100 Output Side

EXPORTING TO ( )

1. Connect the S-Video and RCA audio cables from the VCR’s Line input to the output on the DAC-100.

2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac’s FireWire Port.

3. Power on the DAC-100 and the VCR.

4. Start the Editing Software. (Not Supplied)

5. Press the DAC-100’s Source Button to switch it to “DV” and the A Encode Button to “16 bit”.

6. Go to the “Export” mode on the Editing software to begin exporting video to the VCR.

FireWire

REAR VIEW

Set to “16 bit”

Set to “AV”

PUSH

Set to “16 bit”

FireWire to

PC/MAC

SOURCE

A ENCODE

How to Export Video from the computer back to Tape

DAC-100 Output Side

The Important Notice of Safety Instruction

and Radio & TV Interference

1. Read all of these instructions and save them for later reference.

2. Follow all warnings and instructions marked on the products.

3. Unplug this product from the wall outlet before cleaning. Do not use

liquid or aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water.

5. Do not place this product on an unstable cart, stand or table. The

product may fall, causing serious damage to the product.

6. Slots and openings on the cabinet and the back or bottom are

provided for ventilation. To ensure reliable operation of the product

and to protect it from overheating, do not block or cover these

openings. The openings should never be blocked by placing the

products on a bed, sofa, rug or other similar surface. This product

should never be placed near or over a radiator or heat register. This

product should not be placed in a built-in installation unless proper

ventilation is provided.

7. This product should be operated from the type of power source

indicated on the marking label of the AC adapter. If you are not sure

of the type of power available, consult your dealer or local Power

Company.

8. Do not allow anything to rest on the power cord. Do not locate this

product where the cord will be walked on.

9. If an extension cord is used with this product, make sure that the total

of the ampere ratings on the products plugged into the extension cord

to not exceed the extension cord ampere rating. Also, make sure that

the total of all products plugged into the wall outlet does not exceed

15 amperes.

10. Never push objects of any kind into this product through cabinet slots

as they may touch dangerous voltage points or short out parts that

could result in a risk of fire or electric shock. Never spill liquid of any

kind on the product.

11. Except as explained elsewhere in this guide, don’t attempt to service

this product yourself. Opening and removing those covers that are

marked “Do Not Remove” may expose you to dangerous voltage

points or other risks. Refer all servicing on those compartments to

service personnel.

12. Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are

covered by the operating instructions since improper

adjustment of other controls may result in damage and will often

require extensive work by a qualified technician to restore the

product to normal operation.

E. If the product has been dropped or the cabinet has been

damaged.

F. If the product exhibits a distinct change in performance,

indicating a need for service.

Service and Support

It is our goal to make your products ownership a satisfying experience. Our

supporting staff is available to assist you in setting up and operating your

system. Please refer to our web site www.datavideo-tek.com for answers

to common questions, support requests or contact your local office below.

Datavideo Corporation (USA)

12300-U East Washington Blvd., Whittier, CA 90606 USA

Tel: +1 562 696 2324 www.datavideo.us

Datavideo Technologies Europe BV

Californiedreef 263565 BL Utrecht, The Netherlands

Tel: +31 30 261 9656 www.datavideo.info

Datavideo UK Limited

Unit 2 Waterside Business Park, Hadfield, Glossop, Derbyshire SK131BE UK

Tel: +44 1457 851000 www.datavideo.info

Datavideo Technologies Co., Ltd.

10F, 176 Jian-Yi Rd, Chung Ho City, Taipei Hsien, Taiwan 235

Tel: +886 2 8227 2888 www.datavideo.com.tw

Datavideo Technologies China Co.

2F-D, 2 Lane 777, West Guangzhong Rd, Zhabei District, Shanghai, China

Tel: +86 21 5603 6599 www.datavideo.cn

Datavideo Technologies (S) PTE Ltd.

100 Lor 23, Geylang Rd, #01-03 D’Centennial, Singapore 388398

Tel: +65 6749 6866 www.datavideo.sg

Andere Handbücher für DAC-100

Inhaltsverzeichnis

Andere Data Video Medienkonverter Handbücher

Data Video

Data Video DAC-60 Bedienungsanleitung

Data Video

Data Video DAC-200 Bedienungsanleitung

Data Video

Data Video VS-100 Bedienungsanleitung

Data Video

Data Video DAC-9P Bedienungsanleitung

Data Video

Data Video DAC-7L Bedienungsanleitung

Data Video

Data Video NVD-30 MARK II Bedienungsanleitung

Data Video

Data Video Tally Box TB-20 Bedienungsanleitung

Data Video

Data Video NVD-25 Bedienungsanleitung

Data Video

Data Video PD-10 Bedienungsanleitung

Data Video

Data Video BAC-03 Bedienungsanleitung

Data Video

Data Video DAC-8 Bedienungsanleitung

Data Video

Data Video NVD-35 MARK II Bedienungsanleitung

Data Video

Data Video DAC-70 Bedienungsanleitung

Data Video

Data Video DAC-9P Bedienungsanleitung

Data Video

Data Video DAC-70 Bedienungsanleitung

Data Video

Data Video DAC-75T Bedienungsanleitung

Data Video

Data Video DAC-8PA Bedienungsanleitung

Data Video

Data Video DAC-2 Bedienungsanleitung

Data Video

Data Video DAC-07 Bedienungsanleitung

Data Video

Data Video KMU-100 Bedienungsanleitung

Data Video

Data Video NVS-40D Bedienungsanleitung

Data Video

Data Video NVD-40 Bedienungsanleitung

Data Video

Data Video DAC-30 Service-Handbuch

Data Video

Data Video VP-260 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung