Data Video DAC-70 Bedienungsanleitung
Up / Down Cross Converter
DAC-70
Quick Start Guide
www.datavideo.com
Jun-10.2013
P/N: G082060577B1
1
Table of Contents
Warnings and Precautions .......................................... 2
Packing List................................................................. 4
Introduction.................................................................. 4
Features ...................................................................... 4
Functions..................................................................... 5
Front Panel.............................................................. 5
Rear Panel............................................................... 6
DIP Switch Mode Selection:........................................ 7
Firmware Upgrade....................................................... 8
DAC-Center Utility....................................................... 9
Dimensions................................................................ 14
Specifications ............................................................ 15
Service & Support...................................................... 16
2
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit
may fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are
provided for ventilation. To ensure safe and reliable operation of this
unit, and to protect it from overheating, do not block or cover these
openings. Do not place this unit on a bed, sofa, rug, or similar
surface, as the ventilation openings on the bottom of the cabinet will
be blocked. This unit should never be placed near or over a heat
register or radiator. This unit should not be placed in a built-in
installation unless proper ventilation is provided.
7. This product should only be operated from the type of power source
indicated on the marking label of the AC adapter. If you are not sure
of the type of power available, consult your Datavideo dealer or your
local power company.
8. Do not allow anything to rest on the power cord. Do not locate this
unit where the power cord will be walked on, rolled over, or
otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the
total of the ampere ratings on the products plugged into the
extension cord do not exceed the extension cord’s rating.
10. Make sure that the total amperes of all the units that are plugged
into a single wall outlet do not exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet
ventilation slots, as they may touch dangerous voltage points or
short out parts that could result in risk of fire or electric shock. Never
3
spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not
attempt to service this product yourself. Opening or removing covers
that are marked “Do Not Remove” may expose you to dangerous
voltage points or other risks, and will void your warranty. Refer all
service issues to qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service
personnel under the following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating
conditions. Adjust only those controls that are covered by the
operating instructions in this manual; improper adjustment of other
controls may result in damage to the unit and may often require
extensive work by a qualified technician to restore the unit to normal
operation;
e. When the product has been dropped or the cabinet has been
damaged;
f. When the product exhibits a distinct change in performance,
indicating a need for service.
14. Due to the general consumer usage behavior, efficient power
distribution on the field, corporate environment responsibility by
eliminating harmful substances such as carbon dioxide, sulphur
dioxide, etc, and other unexpected risks, this product does not
provide standby power option.
4
Packing List
The following items should be included in the box. If any items are
missing please contact your supplier.
1 x Accessory Note
1 x Quick Start Guide
Introduction
Datavideo DAC-70 up/ down cross converter is for conversation between
SD and HD video formats. It allows instantly switch between SD and HD
video formats automatically when the video input changes. Compatible
with the advanced 3GB/s SDI, the converter includes a built-in mini-USB
connection for future updates and video format compatibility.
Features
Includes full up, down, and cross conversion between HD and SD
video formats.
Support 3 GB/s SDI Technology
Full 10-bit processing with high-quality video filtering
Built with high-quality standards and low SDI jitter to get longest SDI
cable lengths
Supports multi-channel audio (SDI 8 ch audio embedded)
Mini USB port for F/W upgrade ; Aspect ratio configuration.
5
Functions
Front Panel
Mode Select
Video source, audio source, output video format &
aspect ratio select.
Source Indicator
Display video source format.
HDMI OUT
Video and Audio output from HDMI.
HD/SD - SDI OUT
Video and Audio output from SDI.
DC In Socket
Connect the supplied 12V PSU to this socket. The
connection can be secured by screwing the outer
fastening ring of the DC In plug to the socket.
USB
Firmware upgrade/ Function control by DAC-Center
6
Rear Panel
Video In
Connect your VGA equipment to this connector
HDMI Input
Video and Audio input from HDMI.
AUDIO In
2 channels RCA unbalanced audio input.
HD-SDI In
HD - SDI input and Loop-through output connectors.
7
DIP Switch Mode Selection:
8
Firmware Upgrade
If you need update DAC-70’s firmware please check the User Adjust Tool
CD or you can link www.datavideo.comdownload the tools.
Firmware is upgradable in the field using the integrated USB port.
Step 1- Open upload firmware program tools.exe, connect unit to PC by
USB cable and turn off power
Step 2 - Turn on power
Step 3 - Turn off power and back on again to reset unit and select
firmware.
Step 4 - Press start button to update the firmware
Step 5 - Close upload firmware program tools
9
DAC-Center Utility
Settings the video source, audio source, picture adjusts...etc.
Please copy ‘’DAC-70 Center.exe ’’ tool from ‘’User Adjust Tool‘’ CD
before you setting.
1. Information – display the input format & firmware version.
2.1 Press “Video” to setting the video source.
Andere Handbücher für DAC-70
3
Inhaltsverzeichnis
Andere Data Video Medienkonverter Handbücher
Data Video
Data Video DAC-45 Bedienungsanleitung
Data Video
Data Video PD-10 Bedienungsanleitung
Data Video
Data Video BAC-03 Referenzhandbuch
Data Video
Data Video DAC-100 Handbuch
Data Video
Data Video STC-100 Bedienungsanleitung
Data Video
Data Video DAC-8PA Bedienungsanleitung
Data Video
Data Video DAC-70 Bedienungsanleitung
Data Video
Data Video DAC-9P Bedienungsanleitung
Data Video
Data Video DDC-2512 Bedienungsanleitung
Data Video
Data Video NVS-40D Bedienungsanleitung
Data Video
Data Video DAC-15 Bedienungsanleitung
Data Video
Data Video DAC-8 Bedienungsanleitung
Data Video
Data Video NVD-40 Bedienungsanleitung
Data Video
Data Video DAC-50 Bedienungsanleitung
Data Video
Data Video DAC-50S Bedienungsanleitung
Data Video
Data Video NVD-25 Bedienungsanleitung
Data Video
Data Video DAC-8P Bedienungsanleitung
Data Video
Data Video DAC-200 Bedienungsanleitung
Data Video
Data Video VS-100 Bedienungsanleitung
Data Video
Data Video DAC-60 Bedienungsanleitung
