Data Video TC-200 Bedienungsanleitung

TC-200

www.datavideo.com

Instruction manual

TITLE CREATOR

Table of Contents

FCC COMPLIANCE STATEMENT ..................................................................................... 3

WARNINGS AND PRECAUTIONS.................................................................................... 3

WARRANTY ................................................................................................................... 4

STANDARD WARRANTY ......................................................................................4

THREE YEAR WARRANTY ....................................................................................5

DISPOSAL ...................................................................................................................... 5

INTRODUCTION............................................................................................................. 6

FEATURES ........................................................................................................6

MINIMUM COMPUTER REQUIREMENTS: ................................................................6

EXAMPLE SET UP WITH TC-200..................................................................................... 7

CONNECTIONS & CONTROLS ........................................................................................ 8

FRONT PANEL...................................................................................................8

REAR PANEL.....................................................................................................9

FIRMWARE UPDATE .................................................................................................... 10

SPECIFICATIONS .......................................................................................................... 14

SERVICE & SUPPORT ................................................................................................... 16

Disclaimer of Product & Services

The information offered in this instruction manual is intended as a guide only. At all times,

Datavideo Technologies will try to give correct, complete and suitable information. However,

Datavideo Technologies cannot exclude that some information in this manual, from time to time,

may not be correct or may be incomplete. This manual may contain typing errors, omissions or

incorrect information. Datavideo Technologies always recommend that you double check the

information in this document for accuracy before making any purchase decision or using the

product. Datavideo Technologies is not responsible for any omissions or errors, or for any

subsequent loss or damage caused by using the information contained within this manual.

Further advice on the content of this manual or on the product can be obtained by contacting

your local Datavideo Office or dealer.

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Warnings and Precautions

1. Read all of these warnings and save them for later reference.

2. Follow all warnings and instructions marked on this unit.

3. Unplug this unit from the wall outlet before cleaning. Do not use liquid

or aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this unit in or nea r water.

5. Do not place this unit on an unstable cart, stand, or table. The unit may

fall, causing serious damage.

6. Slots and openings on the cabinet top, back, and bottom are provided

for ventilation. To ensure safe and reliable operation of this unit, and to

protect it from overheating, do not block or cover these openings. Do

not place this unit on a bed, sofa, rug, or similar surface, as the

ventilation openings on the bottom of the cabinet will be blocked. This

unit should never be placed near or over a heat register or radiator. This

unit should not be placed in a built-in installation unless proper

ventilation is provided.

7. This product should only be operated from the type of power source

indicated on the marking label of the AC adapter. If you are not sure of

the type of power available, consult your Datavideo dealer or your local

power company.

8. Do not allow anything to rest on the power cord. Do not locate this unit

where the power cord will be walked on, rolled over, or otherwise

stressed.

9. If an extension cord must be used with this unit, make sure that the

total of the ampere ratings on the products plugged into the extension

cord do not exceed the extension cord rating.

10. Make sure that the total amperes of all the units that are plugged into a

single wall outlet do not exceed 15 amperes.

11. Never push objects of any kind into this unit through the cabinet

ventilation slots, as they may touch dangerous voltage points or short

out parts that could result in risk of fire or electric shock. Never spill

liquid of any kind onto or into this unit.

12. Except as specifically explained elsewhere in this manual, do not

attempt to service this product yourself. Opening or removing covers

that are marked “Do Not Remove” may expose you to dangerous

voltage points or other risks, and will void your warranty. Refer all

service issues to qualified service personnel.

13. Unplug this product from the wall outlet and refer to qualified service

personnel under the following conditions:

a. When the power cord is damaged or frayed;

b. When liquid has spilled into the unit;

c. When the product has been exposed to rain or water;

d. When the product does not operate normally under normal

operating conditions. Adjust only those controls that are covered by

the operating instructions in this manual; improper adjustment of

other controls may result in damage to the unit and may often

require extensive work by a qualified technician to restore the unit

to normal operation;

e. When the product has been dropped or the cabinet has been

damaged;

f. When the product exhibits a distinct change in performance,

indicating a need for service.

Warranty

Standard Warranty

•Datavideo equipment are guaranteed against any manufacturing defects

for one year from the date of purchase.

•The original purchase invoice or other documentary evidence should be

supplied at the time of any request for repair under warranty.

•The product warranty period beings on the purchase date. If the

purchase date is unknown, the product warranty period begins on the

thirtieth day after shipment from a Datavideo office.

•Damage caused by accident, misuse, unauthorized repairs, sand, grit or

water is not covered under warranty.

•Viruses and malware infections on the computer systems are not

covered under warranty.

•Any errors that are caused by unauthorized third-party software

installations, which are not required by our computer systems, are not

covered under warranty.

•All mail or transportation costs including insurance are at the expense of

the owner.

•All other claims of any nature are not covered.

•Cables and batteries are not covered under warranty.

•Warranty only valid in the country or region of purchase.

•Your statutory rights are not affected.

Three Year Warranty

•All Datavideo products purchased after July 1st,

2017 are qualified for a free two years extension

to the standard warranty, providing the product is

registered with Datavideo within 30 days of

purchase.

•Certain parts with limited lifetime expectancy such as LCD panels, DVD

drives, Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting,

Camera module, PCIe Card are covered for 1 year.

•The three-year warranty must be registered on Datavideo's official

website or with your local Datavideo office or one of its authorized

distributors within 30 days of purchase.

Disposal For EU Customers only - WEEE Marking

This symbol on the product or on its packaging indicates

that this product must not be disposed of with your other

household waste. Instead, it is your responsibility to

dispose of your waste equipment by handing it over to a

designated collection point for the recycling of waste

electrical and electronic equipment. The separate collection and recycling of

your waste equipment at the time of disposal will help to conserve natural

resources and ensure that it is recycled in a manner that protects human

health and the environment. For more information about where you can

drop off your waste equipment for recycling, please contact your local city

office, your household waste disposal service or the shop where you

purchased the product.

CE Marking is the symbol as shown on the left of this page.

The letters "CE" are the abbreviation of French phrase

"Conformité Européene" which literally means "European

Conformity". The term initially used was "EC Mark" and it

was officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993.

"CE Marking" is now used in all EU official documents.

Introduction

Thank you for purchasing the Datavideo TC-200, Title Creator, overlay box.

The TC-200 can be used with Datavideo’s Windows based Character

Generator software such as CG-200, CG-250, CG-350 and CG-500.

The TC-200 is designed to be portable and rugged as well as quick and easy

to set up in the field. It allows producers to create professional CG overlays

with a Windows laptop instead of transporting a high end desktop PC with

PCIe cards fitted.

This manual will cover the TC-200 overlay box only, a separate manual is

provided with the supplied Character Generator software.

Features

•HDMI input for laptop CG overlay input*.

•HD-SDI video input for overlay or optional genlock

•Two HD-SDI outputs can be configured as separate Key & Fill outputs or

as CG overlay with video

•Supports video resolutions up to 1080i including PAL & NTSC

•Unit can be powered from Battery DC voltage when using an accessory

battery mounting plate [ 7 to 15 V DC Input ].

•Dip switches for easy to follow configuration

*An optional DVI to HDMI cable or Display Port adaptor to HDMI cable may be required

depending on the laptop being used.

Minimum computer requirements:

Please refer to separate CG software manual.

Example Set Up with TC-200

Connections & Controls

Front Panel

Mode Select

The DIP switch allows the user to configure the

following TC-200 settings.

SDI Output

Fill & Key channel outputs

Power LED

Turned ON when power is connected.

Rear Panel

HD/SD - SDI Input

The SDI IN connects an SDI video source via an

SDI cable.

PC Input (HDMI)

Connect a video input from the PC via an HDMI

cable.

Ethernet Port (RJ-45)

10/100M Ethernet Network Interface for FW

upgrade

DC In Socket

Connect the supplied 12V PSU to this socket. The

connection can be secured by screwing the outer

fastening ring of the DC In plug to the socket.

Firmware Update

Datavideo usually releases new firmware containing new features or

reported bug fixes from time to time. Customers can either download the

TC-200 firmware as they wish or contact their local dealer or reseller for

assistance.

This section outlines the firmware upgrade process which should take

approximately 10 minutes to complete.

The existing TC-200 settings should persist through the firmware upgrade

process, which should not be interrupted once started as this could result in

a non-responsive unit.

Successful firmware upgrade on TC-200 requires:

•TC-200 x 1

•12V Power adapter x 1

•Windows PC x 1

•Ethernet Cable x 1

•Flash Update Software (the software can be downloaded from the

official website)

Procedure

1. Connect the TC-200 to a Windows PC via the Ethernet interface.

Note: TC-200 has a default IP address of 192.168.0.211.

2. Set the PC’s IP address to 192.168.0.11.

Andere Handbücher für TC-200

Inhaltsverzeichnis

Andere Data Video Tragbarer Generator Handbücher

Data Video

Data Video CG-350TC Kit Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

ConMed

ConMed 7550 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

Power Stroke

Power Stroke PS906025 Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

PowerBoss

PowerBoss PowerBoss Bedienungsanleitung

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung