Colibrick A/D Converter Table of Contents
Contents
1 Colibrick acquisition device 1
1.1 Front panel of the Colibrick device 2
1.2 Rear panel of the Colibrick device 2
1.3 A/D converter types in general 2
2 Requirements 4
3 Installation 5
3.1 The Colibrick device 5
3.2 Standard cable for Clarity station 6
3.3 Connection with chromatograph 7
3.3.1 Connection of signal cables 7
3.3.2 Connection of starting cables 8
3.4 Clarity Configuration 9
3.4.1 Measuring on multiple instruments 11
3.4.2 Using multiple Colibrick converters 12
4 Using the Colibrick 13
4.1 DataApex Colibrick Setup 13
4.2 Method Setup 17
4.2.1 Method Setup - Acquisition 17
4.2.2 Method Setup - Measurement 19
4.3 Digital Inputs and Outputs 20
4.4 Device Monitor 21
5 Troubleshooting 22
5.1 Locate your problem 22
5.2 Problems with Colibrick 23
5.2.1 How to check the proper installation of the Colibrick driver 24
5.2.2 Manual installation 26
5.2.2.1 Installation and reinstallation in Windows 8, 7 and Vista 26
5.2.2.2 Installation and reinstallation in Windows XP 29
5.2.2.3 Reinstallation of drivers using the System Restore Point 33
5.2.3 Data Acquisition - non-functional 34
5.2.4 Data Acquisition - Simulated 36
6 Tables and specifications 37
6.1 Description of the INT7 connector (Male) 37
6.2 Parameters of digital inputs and outputs 38
6.3 Colibrick - CE conformity declaration 39
6.4 Technical Data 40
- i -
