Datacom Systems Tap Series Leitfaden

Fiber taps allow you to make a copy of network trafﬁc as it travels between two network devices. These highly reliable, non-

powered devices are the perfect solution to collect and capture network trafﬁc for application analysis.

Tap Series FTP-1000,2000,4000

FASTstart Guide

What is included? (1) Fiber tap w/ mounting bracket (for use with RMC-2 , RMC 12-2 or RMC-3, RMC 12-3)

(1) Download Card/Faststart Guide (tells where to download more product information)

For More information

DATACOM

SYSTEMS INC

Installation Follow the wiring diagrams shown below. Fiber taps are directional, and use speciﬁc inputs and outputs for TX and RX to work

properly. Make sure to clean all connectors with compressed air and clean patch cable connectors prior to installation.

Typical Insertion loss ratios*: •50/50 MM -4.2 dB •70/30 MM -3.0/-6.7 dB •50/50 SM -3.9 dB •70/30 SM -2.2/-6.3 dB (*approximate)

Customer Service is available from our website: www.datacomsystems.com or by calling +1 315 463 9541

Find out more. Visit

www.datacomsystems.com

FTP-1000 Series

Router

Front View

Firewall

Analysis Tool

Port

1Port

MONITORA B

TX RX TX RX

Link 1

NET

Link 1

TX RX

NET

MON

Link 2

NET

MON

TX RX TX RX

NET

Link 1

TX RX TX

NET

MON

Link 3

Link 2 Link 4

NET

RX TX RX

NET

MON

NET

RX TX RX TX

NET

MON

NET

RX TX RX

NET

MON

Front View

Firewall A

Router A

Firewall B

Router B

Router A

Firewall A

Firewall B

Router

Firewall

FTP-2000 Series

FTP-4000 Series

Front View

Page 1

Tap Series FTP-1000,2000,4000

FASTstart Guide

For More information

DATACOM

SYSTEMS INC

Customer Service is available from our website: www.datacomsystems.com or by calling +1 315 463 9541

Page 2

Correct Wiring: When installing a Fiber Tap, it is important to make sure that the Tx and

Rx fibers are connected to the respective ports on the Fiber Tap. When wired correctly, the

traffic incoming on an Rx port will be split before being sent to two separate Tx ports (One

copy to the other Network device, the other copy to Monitor).

Reverse Wiring: If the fibers are connected backwards, light will not be received on the

monitoring port. This is because the internal coupler that splits the light is unidirectional.

To Avoid Reverse Wiring: Reverse wiring can be difficult to catch initially, since an

incorrectly cabled Fiber Tap will still send light between the network ports and connectivity

will be seen on both network endpoints. Be sure to check the for light on the monitor ports as

well as the network ports when installing the Fiber Tap.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Datacom Systems Netzwerk-Hardware Handbücher

Datacom Systems

Datacom Systems 1000BT-AT-SX Bedienungsanleitung

Datacom Systems

Datacom Systems VS-1112-F Leitfaden

Datacom Systems

Datacom Systems SS-1200-S Series Bedienungsanleitung

Datacom Systems

Datacom Systems FTP-8000 Series Leitfaden

Datacom Systems

Datacom Systems MULTINETswitch D28100BTSL Montageanleitung

Datacom Systems

Datacom Systems WANswitch W2358DSL Montageanleitung

Datacom Systems

Datacom Systems SS series SPAN Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung