Datalogic MAGELLAN 3200VSI Bedienungsanleitung

2D Upgrade Kit

Magellan

3200VSi / 3300HSi

Follow these instructions to upload a 2D license file to either a Magellan 3200VSi or 3300HSi model scanner. This will upgrade

the scanner to read 2D bar codes in addition to the already available symbologies. Read all of these instructions before starting.

1. If you have not already done so, remove the scanner from its installed position to allow access to the microSD card slot.

2. Ensure there are no other cables attached to the scanner, then apply power and wait for the reset beep.

3. Lift and rotate the rubber cover to access the card slot (see the illustration on the next page), then carefully insert the 2D

upgrade microSD card into the slot until it "clicks" into place. If installed properly, you should immediately hear a rapid

sequence of tones to indicate the upgrade process has started.

For the 3300HSi scanner, use a coin or similar blunt

object to lever the top cover from the scanner, then grasp

the lift handles and carefully lift the unit from the counter.

For the 3200VSi model, separate the scanner from

its back cover.

CAUTION

The microSD card slot is spring loaded. Keep your finger lightly in place atop the card until you are

sure it is fully seated in place.

Use your finger or thumbnail to push in on the top edge of the card to be slightly below flush with

the scanner enclosure when inserting or removing the card. This will engage/disengage the

spring mechanism.

Never insert tools or other foreign objects into the microSD card slot.

Improper insertion of the microSD card can result in the premature exhaustion of 2D upgrade

licenses.

If you do not hear audible tones upon microSD card full insertion, the card does not contain any

2D upgrade licenses.

Top Cover

Coin Slot Lift Handles

Back Cover

Optional Back

Cover/Stand

Assembly

4. Wait for five seconds after hearing the audio indication (a rapid sequence of tones indicates the upgrade has started) before

proceeding. This will give the scanner time to complete the upload.

5. Push in gently using your finger or thumbnail to disengage and remove the microSD card. Remember to keep your finger

in place atop the card’s edge to avoid accidentally “launching” the card from the spring-loaded slot.

6. Reconnect all cables which were disconnected earlier.

7. Your scanner is now ready to scan PDF 417 and Datamatrix bar codes. All other 2D symbologies will need to be enabled

using programming bar codes which can be found in the Product Reference Guide (PRG) or by using the Magellan On

Screen Programming (OSP) utility available from the website at www.scanning.datalogic.com.

8. Test the scanner’s new 2D reading ability by scanning sample 2D bar codes of the type(s) you need to read. Once you have

verified the scanner’s new capability, re-install the unit in its original position.

3300HSi Model 3200VSi Model

Rubber

Cover

microSD Card Slot

microSD

Card Slot

Rubber

Cover

Scanner

microSD Card

Push down past

ush to seat,

then carefully

release

Seated card

Andere Handbücher für MAGELLAN 3200VSI

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Datalogic Barcode-Lesegerät Handbücher

Datalogic

Datalogic Touch 90 pro Bedienungsanleitung

Datalogic

Datalogic PowerScan 9500 Series Installations- und Betriebshandbuch

Datalogic

Datalogic PowerScan PM9600 Series Bedienungsanleitung

Datalogic

Datalogic QuickScan Lite QW2100 Bedienungsanleitung

Datalogic

Datalogic QuickScan I QM2131 Installations- und Betriebshandbuch

Datalogic

Datalogic POWERSCAN PBT7100 guide Installations- und Betriebshandbuch

Datalogic

Datalogic Gryphon GFE4400 Kurzanleitung zur Einrichtung

Datalogic

Datalogic DLC7070 Bedienungsanleitung

Datalogic

Datalogic Gryphon Series Installations- und Betriebshandbuch

Datalogic

Datalogic Gryphon I GBT4400 Bedienungsanleitung

Datalogic

Datalogic BC9 0-BT Series Bedienungsanleitung

Datalogic

Datalogic Matrix 210 Betriebsanleitung

Datalogic

Datalogic DS2400N Bedienungsanleitung

Datalogic

Datalogic Matrix 300 Bedienungsanleitung

Datalogic

Datalogic Formula 8500 Bedienungsanleitung

Datalogic

Datalogic Gryphon I GFS4400 Bedienungsanleitung

Datalogic

Datalogic Magellan 800i Installations- und Betriebshandbuch

Datalogic

Datalogic QuickScan QD24 series Installations- und Betriebshandbuch

Datalogic

Datalogic QuickScan I QD21 1 Series Installations- und Betriebshandbuch

Datalogic

Datalogic POWERSCAN PBT7100 guide Installations- und Betriebshandbuch

Datalogic

Datalogic PowerScan BT8300 Family Bedienungsanleitung

Datalogic

Datalogic Magellan 1100i Installations- und Betriebshandbuch

Datalogic

Datalogic DX8200A Bedienungsanleitung

Datalogic

Datalogic DS4600A Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung