Datalogic MAGELLAN 8400 Bedienungsanleitung

1x 1x 1x

MagellanTM 83/8400 Calibration Process Quick Reference Sheet

1 2 3 4

5 6 7 8

Ensure that the Scanner-

Scale is powered-on (the

green top LED and orange

>0< button will be lit or

flashing).

Return the wire lift handle

to its down position and

replace the Top Platter. (If

the Top Platter does not

seat correctly, recheck to

see that the lift handle is

fully retracted.)

After ensuring the platter

is fully seated, press &

release the flashing >0<

button once. Wait for the

scanner to sound two

beeps. (The >0< button

will continue to flash.)

Place 20 lbs. of certified

weights on the platter and

press & release the >0<

button once. The scanner

will emit a trill sound upon

registering the weight.

Remove the weights from

the platter and press &

release the >0< button once

to complete the calibration

sequence. The scanner will

reset and the >0< button

will light steadily.

Remove the Top Platter

from the scanner-scale,

and locate the switch

door.

Open the calibration door

cover by pushing back

towards the optics

chassis. (It may be

necessary to push the

wire lift handle into the

upright position to access

the cover.)

Use your finger to reach

inside the calibration bay,

locate the small plunger

switch and press &

release it once. The

scanner will issue seven

rapid beeps and the >0<

button will begin to flash.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.

9Remove the platter and

push the wire lift handle

to the upright position in

preparation for sealing the

calibration door.

10 Fully close the calibration

door and apply the

calibration seal in accor-

dance with local require-

ments. The door is fully

closed when the holes in

the door and the metal

tab are aligned. (See

Sealing Notes.)

No portion of the seal,

whether wire, paper

label or other method,

should be in contact

with the weigh frame

(shown in green) or

scale movement will be

compomised.

Lift Handle Sealing Notes

Conditions to Avoid:

Wire loop too long (not snug)

Calibration door not closed

Seal in contact with weigh frame

CALL DATALOGIC TECHNICAL SUPPORT: 1-800-547-2507

VIEW THE CALIBRATION VIDEO AT: http://www.youtube.com/watch?v=wHYjcTdd9Gk

IF YOU ENCOUNTER PROBLEMS OR HAVE QUESTIONS ABOUT

ANY PART OF THE CALIBRATION PROCESS:

820061014 (Rev. A)October 2013

Andere Handbücher für MAGELLAN 8400

Dieses Handbuch passt für folgende Modelle

Andere Datalogic Barcode-Lesegerät Handbücher

Datalogic

Datalogic PowerScan PD7130 Installations- und Betriebshandbuch

Datalogic

Datalogic PowerScan BT9500 Family Bedienungsanleitung

Datalogic

Datalogic Magellan 2200VS Bedienungsanleitung

Datalogic

Datalogic QuickScan QM21 1 Series Bedienungsanleitung

Datalogic

Datalogic Matrix-1021 HD Bedienungsanleitung

Datalogic

Datalogic Dragon D131 Bedienungsanleitung

Datalogic

Datalogic PowerScan RF Bedienungsanleitung

Datalogic

Datalogic QuickScan Lite QW2400 Bedienungsanleitung

Datalogic

Datalogic Reader Matrix-1000 Bedienungsanleitung

Datalogic

Datalogic Magellan 2200VS Bedienungsanleitung

Datalogic

Datalogic QuickScan BC2030 Bedienungsanleitung

Datalogic

Datalogic Magellan 2200VS Bedienungsanleitung

Datalogic

Datalogic Gryphon 4200 Series Bedienungsanleitung

Datalogic

Datalogic PowerScan D8330 Bedienungsanleitung

Datalogic

Datalogic PowerScan D8330 Bedienungsanleitung

Datalogic

Datalogic Dragon Bedienungsanleitung

Datalogic

Datalogic BC-80X0 Cradle Bedienungsanleitung

Datalogic

Datalogic QuickScan Mobile Bedienungsanleitung

Datalogic

Datalogic Gryphon D100 Bedienungsanleitung

Datalogic

Datalogic Gryphon GD4200 Installations- und Betriebshandbuch

Datalogic

Datalogic Dragon D151 Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Montage- und Bedienungsanleitung

Datalogic

Datalogic Heron D130 Bedienungsanleitung

Datalogic

Datalogic PowerScan D8330 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung