Datalogic PowerScan D8530 Bedienungsanleitung

Quick Reference Guide

www.scanning.datalogic.com

PowerScan D8530 Family

Datalogic Scanning, Inc.

959 Terry Street

Eugene, OR 97402

Telephone: (541) 683-5700

Fax: (541) 345-7140

Australia

Datalogic Scanning Pty Ltd

North Ryde, Australia

Telephone: [61] (2) 9870 3200

Fax: [61] (2) 9878 8688

France and Benelux

Datalogic Scanning Sarl

LES ULIS Cedex, France

Telephone: [33].01.64.86.71.00

Fax: [33].01.64 46.72.44

Germany

Datalogic Scanning GmbH

Darmstadt, Germany

Telephone: 49 (0) 61 51/93 58-0

Fax: 49 (0) 61 51/93 58 58

Italy

Datalogic Scanning SpA

Vimercate (MI), Italy

Telephone: [39] (0) 39/62903.1

Fax: [39] (0) 39/6859496

Japan

Datalogic Scanning KK

Shinagawa, Tokyo, Japan

Telephone: 81 (0)3 3491 6761

Fax: 81 (0)3 3491 6656

Latin America

Datalogic Scanning, Inc

Miami, Florida, USA

Telephone: (305) 591-3222

Fax: (305) 591-3007

Spain and Portugal

Datalogic Scanning Sarl

Sucursal en España

Madrid, Spain

Telephone: 34 91 746 28 60

Fax: 34 91 742 35 33

United Kingdom

Datalogic Scanning LTD

Watford, England

Telephone: 44 (0) 1923 809500

Fax: 44 (0) 1923 809 505

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

documentation or the procedures described therein may be reproduced or

transmitted in any form or by any means without prior written permission of

Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic

Scanning”). Owners of Datalogic products are hereby granted a non-exclusive,

revocable license to reproduce and transmit this documentation for the

purchaser's own internal business purposes. Purchaser shall not remove or

alter any proprietary notices, including copyright notices, contained in this

documentation and shall ensure that all notices appear on any reproductions of

the documentation.

Should future revisions of this manual be published, you can acquire printed

versions by contacting your Datalogic representative. Electronic versions may

either be downloadable from the Datalogic website

(www.scanning.datalogic.com) or provided on appropriate media. If you visit our

website and would like to make comments or suggestions about this or other

Datalogic publications, please let us know via the "Contact Datalogic" page.

DISCLAIMER

Datalogic has taken reasonable measures to provide information in this manual

that is complete and accurate, however, Datalogic reserves the right to change

any specification at any time without prior notice. Datalogic is a registered

trademark of Datalogic S.p.A. in many countries and the Datalogic logo is a

trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc. All other

trademarks and trade names referred to herein are property of their respective

owners.

iii

CONTENTS

Updates and Language Availability .................................................................................... iv

PowerScan® D8530 family Description................................................................................1

Using PowerScan® D8530 family .......................................................................................2

Indicators ............................................................................................................................3

Setup ..................................................................................................................................3

Connections ........................................................................................................................4

Interface Selection ..............................................................................................................7

Wedge Keyboard Nationality...............................................................................................8

USB Keyboard Nationality...................................................................................................9

Reading Parameters .........................................................................................................10

Default Configuration ........................................................................................................11

Operating Test ..................................................................................................................13

Technical Features............................................................................................................14

Service and Support..........................................................................................................18

Warranty ...........................................................................................................................18

Patents..............................................................................................................................18

Compliance .......................................................................................................................19

UPDATES AND LANGUAGE AVAILABILITY

UK/US

The latest drivers and documentation updates for this product are available on

Internet.

Log on to: www.scanning.datalogic.com

Su Internet sono disponibili le versioni aggiornate di driver e documentazione di

questo prodotto. Questo manuale è disponibile anche nella versione italiana.

Collegarsi a: www.scanning.datalogic.com

Les versions mises à jour de drivers et documentation de ce produit sont

disponibles sur Internet. Ce manuel est aussi disponible en version française.

Cliquez sur: www.scanning.datalogic.com

Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation

für dieses Produkt. Die deutschsprachige Version dieses Handbuches ist auch

verfügbar.

Adresse : www.scanning.datalogic.com

En Internet están disponibles las versiones actualizadas de los drivers y

documentación de este producto. También está disponible la versión en

español de este manual.

Dirección Internet: www.scanning.datalogic.com

POWERSCAN® D8530 FAMILY

POWERSCAN® D8530 FAMILY DESCRIPTION

The present manual includes just a few commands to allow the startup of the

scanner and setting of the required interface. For complete configuration of the

scanner, refer to the PowerScan D8530 Reference Manual or the Aladdin

configuration program, both downloadable from the website and available on

the included CD ROM.

The PowerScan® D8530 Hand-Held Reader packs a lot of performance into an

attractive, rugged, hand-held device. It operates in commercial and industrial

environments as well as the front office.

Omni-directional

Operating

To read a symbol or capture an image, you simply

aim the reader and pull the trigger. Since

PowerScan® D8530 is a powerful omni-directional

reader, the orientation of the symbol is not

important.

Decoding

Thanks to powerful algorithms, PowerScan® D8530

reliably decodes all major 1D (linear) barcodes, 2D

stacked codes (such as PDF417), 2D matrix symbols

(such as DataMatrix™), postal codes (such as

PLANET). The data stream — acquired from decoding

a symbol — is rapidly sent to the host. The reader is

immediately available to read another symbol.

Formatting and

Concatenating

The string of a decoded code may be processed

according to either a simple or advanced data

formatting and be concatenated to other codes (up to

4 different codes).

Imaging PowerScan® D8530 can also function as a camera

by capturing entire images or image portions of

labels, signatures, and other items. Two different

control modes are available for managing the camera

exposure and calibration.

Autoscanning An autoscan command causes the reader to scan

continuously and to monitor the central zone of its

reading area.

Flash Memory Flash technology allows the upgrade of the

PowerScan® D8530 reader as new symbologies are

supported or as improved decoding algorithms

become available.

DATALOGIC

USING POWERSCAN® D8530 FAMILY

PowerScan® D8530 normally functions by capturing and decoding codes.

The PowerScan® D8530 reader uses an intelligent aiming system. By pulling

the trigger, the aiming system indicates a field of view, which should be

positioned over the code:

Aiming System

When you pull the trigger, a red beam illuminates the code. If the aiming system

is centered and the entire symbology is within the aiming system, you will get a

good read. The field of view changes size as you move the reader closer or

farther away from the code.

Linear barcode 2D Matrix symbol

Relative Size and Location of Aiming System Pattern

Successful reading is signaled by an audible tone plus a good-read green LED.

NOTE

The PowerScan® D8530 hand-held reader aiming system is

designed for general reading and decoding of 1D and 2D symbols.

Some variation in reading distance will occur due to narrow bar

width and other factors.

NOTE

If reading codes positioned on reflective surfaces, it may be

necessary to tilt the reader with respect to the barcode and/or

set the Camera Control parameters. For configuring the Camera

Control parameters refer to the PowerScan® D8530 Reference

Manual available on the website and the CD-ROM.

POWERSCAN® D8530 FAMILY

INDICATORS

LED INDICATORS

The PowerScan® D8530 family uses green LED indicators to signal the

following reader functions:

STATUS BEHAVIOR

Power ON At power-on, the LEDs blink briefly, then

light up for 2 seconds to signal the power

supply is present.

Normal Function The LED lights up after a good decoding and

will switch off only at the next trigger press.

BEEPER

The PowerScan® D8530 basic software provides beeper signals for

good/wrong reading and for indicating errors. Its tone, volume and duration can

be directly configured by using the codes given in the PowerScan® D8530

Reference Manual available on the website.

The application program can also manage the beeper (User Defined Beeper)

when the reader is controlled by a Host PC. It is possible to activate the beeper

by sending a command from the Host to the reader via the current

communication interface.

GOOD READ SPOT

A green Good-Read Spot will be projected in the field of view when the reading

is successful.

SETUP

1. Make connections between PowerScan® D8530 and the Host PC using

the correct interface cable (see the following sections).

2. Read the correct Interface Selection code.

Your reader is now ready to read codes using the default settings.

DATALOGIC

CONNECTIONS

CONNECTING THE CABLE

A. Rubber gasket

B. Plastic boot

C. Cable spacer

D. Cover

E. Strain relief

cSlip the cover over the cable.

dPush the plastic boot into the

rubber gasket. Take care that the

tab on the plastic boot is aligned

with the notch in the rubber gasket.

ePush the plastic boot and gasket

into the handle. Ensure that the

“Front” marking on the plastic boot

is facing out, with the arrow

pointing towards the front of the

scanner.

fInsert the cable into the socket of

the plastic boot.

gInsert the cable spacer into the

cable wire and slide it towards the

handle.

hPush the cover along the cable

towards the reader, and hook it

over the yellow “tooth”.

iInsert the strain relief into the cover

and tighten the screw to fix the

whole assembly to the reader

handle.

Notch

Align

Tab

Arrow

POWERSCAN® D8530 FAMILY

RS-232

WEDGE

USB

The USB interface is compatible with:

Windows®98 (and later) IBM POS for Windows®

Mac OS 8.0 (and later) 4960 Operating System

DATALOGIC

START-UP

As with all USB devices, upon connection, the Host performs several checks by

communicating with the PowerScan® D8530™. During this phase the green

LED on the PowerScan® D8530™reader blinks and normal operations are

suspended. The correct USB driver must be loaded before the PowerScan

D8530 is ready to read codes

For all systems, the correct USB driver for the default USB-KBD interface is

included in the Host Operating System and will either be loaded automatically or

will be suggested by the O.S. and should therefore be selected from the dialog

box (the first time only).

When configuring the USB-COM interface, the relevant files and drivers must be

installed from the USB Device Installation software, which can be downloaded

from the web site http://www.scanning.datalogic.com or can be found on the

CD-ROM.

The reader is ready.

Andere Handbücher für PowerScan D8530

Inhaltsverzeichnis

Andere Datalogic Barcode-Lesegerät Handbücher

Datalogic

Datalogic RIDA DBT6400 Bedienungsanleitung

Datalogic

Datalogic PowerScan PD9130 Bedienungsanleitung

Datalogic

Datalogic PD9330 Bedienungsanleitung

Datalogic

Datalogic Gryphon 2D Series Installations- und Betriebshandbuch

Datalogic

Datalogic QuickScan QBT2430 Bedienungsanleitung

Datalogic

Datalogic Gryphon GD4200 Installations- und Betriebshandbuch

Datalogic

Datalogic PowerScan PD8590-DPM Bedienungsanleitung

Datalogic

Datalogic QuickScan BC2030 Bedienungsanleitung

Datalogic

Datalogic Gryphon L GD4300 Bedienungsanleitung

Datalogic

Datalogic Magellan 2200VS Bedienungsanleitung

$Datalogic Kyman\ Bedienungsanleitung$

Datalogic

Datalogic Kyman\ Bedienungsanleitung

Datalogic

Datalogic OM-DRAGON Series Bedienungsanleitung

Datalogic

Datalogic QuickScan QD2430 Bedienungsanleitung

Datalogic

Datalogic PowerScan M8300 Bedienungsanleitung

Datalogic

Datalogic PowerScan PD96 Series Installations- und Betriebshandbuch

Datalogic

Datalogic lynx bt Bedienungsanleitung

Datalogic

Datalogic GRYPHON BT100 Bedienungsanleitung

Datalogic

Datalogic Magellan 9300i Bedienungsanleitung

Datalogic

Datalogic QuickScan Lite QW2400 Installations- und Betriebshandbuch

Datalogic

Datalogic FireScan D111 Series Bedienungsanleitung

Datalogic

Datalogic GRYPHON BT SH3500 Bedienungsanleitung

Datalogic

Datalogic Matrix 320 Installations- und Betriebshandbuch

Datalogic

Datalogic Heron HD3130 Installations- und Betriebshandbuch

Datalogic

Datalogic Magellan 1100i Installations- und Betriebshandbuch

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung

Microscan

Microscan MS-1 Gebrauchs- und Pflegehandbuch