Datalogic Controller SC6000 Bedienungsanleitung

SC6000 Controller

QUICK REFERENCE GUIDE

CONTENTS

SC6000-1200 STANDARD MODEL ........................................................................................................................1

SC6000-1211 PROFIBUS MODEL ..........................................................................................................................4

SC6000-1215 DEVICENET MODEL ........................................................................................................................5

SC6000-1230 DUAL ETHERNET MODEL ..............................................................................................................6

COMMON FEATURES ............................................................................................................................................7

NOTE

For further details on product installation, see the complete Reference Manual available on the

configuration CD-ROM included with this product.

SC6000 STANDARD MODEL

SC6000-1200 STANDARD MODEL

Figure A

Connector Panel

Figure B

Power ON and Communication LEDs

Status LEDs

LCD Display

Programming Keypad

Connector Panel Legend

234

Figure C

Modem Connector

Power/Net Connector

Main Interface Connector

Ethernet Connector

uxiliary Interface Connector

Extended I/O Connector

SC6000 STANDARD MODEL

Electrical Connections

The SC6000 is designed to easily connect to the PWO power supply through two standard accessory cables. All

system cabling is concentrated at the PWO except for some Host connections and the Auxiliary interface for

SC6000 configuration using a laptop PC.

The following connector pinouts are given for reference.

MAIN INTERFACE

Pin RS232 RS485 Full Duplex

2 TX TX485 +

3 RX RX485 +

5 GND_ISO GND_ISO

7 CTS RX485 -

8 RTS TX485 -

9-pin D-sub Female Connector

CAUTION

Do not connect GND and GND_ISO to different (external) ground references. GND and

GND_ISO are internally connected through filtering circuitry which can be permanently

damaged if subjected to voltage drops over 0.8 Vdc.

AUXILIARY INTERFACE

Pin Name Function

2 TX Transmit

3 RX Receive

5 GND Ground

9-pin D-sub Female Connector

MODEM CONNECTOR

Pin Name Function

1 CD Carrier detect

2 RX Receive

3 TX Transmit

4 DTR Data terminal ready

5 GND Ground

6 DSR Data set ready

7 RTS Request to send

8 CTS Clear to send

9 RI Ring indicator

9-pin D-sub Male Connector

ETHERNET CONNECTOR

Pin Name Function

1 TX + Transmitted data (+)

2 TX - Transmitted data (-)

3 RX + Received data (+)

6 RX - Received data (-)

4, 5, 7, 8 N.C. Not connected

1 8

RJ45 Modular Connector

SC6000 STANDARD MODEL

Typical Layouts

Ethernet Connection

Main Connection

Modem Connection

SC6000 PROFIBUS MODEL

SC6000-1211 PROFIBUS MODEL

234

SC6000 Profibus Connector Panel

Modem Connector

Power/Net Connector

Main Interface Connector

Profibus Connector

uxiliary Interface Connector

Extended I/O Connector

Ethernet Connector

PROFIBUS CONNECTOR

Pin Name Function

1 Shield* Shield, protective ground resp.

2 N.C. Not connected

3 B-LINE (RxD/TxD-P) Received/Transmitted data-P

4 CNTR-P** Repeater control signal

5 DGND Data ground (M5V)

6 +5 V Voltage plus (P5V)

7 N.C. Not connected

8 A-LINE (RxD/TxD-N) Received/Transmitted data

9 CNTR-N** Repeater control signal

9-pin D-sub Female Connector

* signal is optional

** signal is optional; RS485 level

Fieldbus Network

SC6000 DEVICENET MODEL

SC6000-1215 DEVICENET MODEL

234

SC6000 DeviceNet Connector Panel

Modem Connector

Power/Net Connector

Main Interface Connector

DeviceNet Connector

uxiliary Interface Connector

Extended I/O Connector

Ethernet Connector

DEVICENET CONNECTOR

Pin Name Function

2 V+ Supply voltage – positive pin

5 CAN_L CAN bus data line – L

1 SHIELD Shield

4 CAN_H CAN bus data line – H

3 V- Supply voltage – negative pin

5-pin male DeviceNet Connector

Fieldbus Network

SC6000 DUAL ETHERNET MODEL

SC6000-1230 DUAL ETHERNET MODEL

SC6000 Dual Ethernet Connector Panel

234

Modem Connector

Power/Net Connector

Main Interface Connector

Second Ethernet Connector

uxiliary Interface Connector

Extended I/O Connector

Ethernet Connector

ETHERNET CONNECTOR

Pin Name Function

1 TX + Transmitted data (+)

2 TX - Transmitted data (-)

3 RX + Received data (+)

6 RX - Received data (-)

4, 5, 7, 8 N.C. Not connected

1 8

RJ45 Modular Connector

Dual Ethernet Connection

COMMON FEATURES

Overall Dimensions

319.5

[12.58]

248.7

[9.79]

80.2

[3.16]

99.7

[3.93]

124.4

[4.90]

39.7

[1.56]

MØ8

39.7

[1.56]

124.4

[4.90]

298

[11.73]

inch

SC6000 Overall Dimensions

180

[7.09]

309

[12.17]

[0.20]

N°2R15

[R0.59]

[0.59]

[1.97]

[1.89]

N°6 8

[0.32]

[3.15]

[3.74]

[1.57]

[3.35]

[1.97]

[3.35]

[1.89]

300

[11.80]

[1.57]

[0.33]

N°2R10

[R0.39]

N°2Ø56

[Ø2.22]

[0.63]

[1.18]

[0.59]

N°2Ø8

[Ø0.33]

[0.79]

inch

ST-222 Bracket Overall Dimensions

COMMON FEATURES

Mechanical Installation

To mount the SC6000 Controller on the reading station frame proceed as follows:

1 Mount the bracket on the reading station frame: the slots on the bracket will help obtain the best positioning.

When working in environments characterized by strong vibrations, set the screws as close as possible to the

bracket edges, see the figure below.

2 Tighten the ST-222 bracket to the reading station frame using the screws and washers.

Mounting the bracket on the conveyor

3 Position the SC6000 Controller at the top of the bracket: make sure the two large round openings coincide to

the ones located at the edges of the SC6000 Controller.

4 While supporting the SC6000 Controller, rotate the whole device until it is aligned for the best viewing

position, then insert the set pin screw with locking washer until it inserts into one of the small positioning

holes located on the terminal bracket.

SC6000 Controller Side View with Punched Steel Ring and Relative Set Pin Screw

Set pin screw

The specially punched steel ring has been designed to obtain the most precise rotation possible in terms of

angle calibration, steadiness and consequent absence of torque between both sides of device.

Andere Handbücher für Controller SC6000

Inhaltsverzeichnis

Andere Datalogic Controller Handbücher

Datalogic

Datalogic SC4000 Bedienungsanleitung

Datalogic

Datalogic DX8200 Bedienungsanleitung

Datalogic

Datalogic Controller SC6000 Bedienungsanleitung

Datalogic

Datalogic Controller SC6000 Bedienungsanleitung

Datalogic

Datalogic Controller SC6000 Bedienungsanleitung

Datalogic

Datalogic HF-CNTL-IND-02 Bedienungsanleitung

Datalogic

Datalogic VS Series Bedienungsanleitung

Datalogic

Datalogic COBALT C0405-USB-01 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch