Datalogic Viper CE Cradle Bedienungsanleitung

Viper™CE Cradle

User’s Manual

Viper™CE Cradle

USER'S MANUAL

DATALOGIC S.p.A.

Via Candini 2

40012 - Lippo di Calderara di Reno

Bologna - Italy

Viper™CE Cradle

Ed.:12/2003

Datalogic reserves the right to make modifications and improvements without prior notification.

Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or

consequential damages resulting from the use of this material.

Product names mentioned herein are for identification purposes only and may be trademarks and or

registered trademarks of their respective companies.

822000350 (Rev. B)

iii

CONTENTS

1GENERAL INFORMATION ..........................................................................1

1.1 Viper™CE Cradle .........................................................................................1

2INSTALLATION............................................................................................3

2.1 Mounting the Cradle......................................................................................3

2.1.1 Portable Desktop Use...................................................................................3

2.1.2 Fixed Desktop Use........................................................................................4

2.2 Installing Device Drivers on PC.....................................................................5

2.2.1 RS232 Device Driver Installation ..................................................................5

2.2.2 USB Device Driver Installation......................................................................8

3CONNECTIONS ...........................................................................................9

3.1 RS232 Connection........................................................................................9

3.2 USB Connection .........................................................................................11

4TECHNICAL FEATURES...........................................................................12

GENERAL INFORMATION

1 GENERAL INFORMATION

1.1 VIPER™CE CRADLE

The Viper™CE cradle paired with one Viper™CE terminal builds a Reading System

for the collection, decoding and transmission of barcoded data.

The communication between terminal and host PC through the Viper™CE cradle

may occur also by using the standard ActiveSync connection.

Figure 1 – Viper™CE Cradle General View

Key:

A) LEDs and discharge button

B) IrDA optical interface

C) Terminal contacts

D) Battery slot

E) USB type B connector

F) RS232 connector

G) Power jack

Viper™CE Cradle

The Viper™CE cradle is a serial communication adapter between the host computer

and the IrDA optical interface on the Viper™CE. It also functions as a battery

charger.

By inserting the Viper™CE terminal into the cradle data can be transmitted to the

host and its battery begins charging. In addition, an extra battery can be charged by

inserting it into the top of the Viper™CE cradle as shown in the following figure.

Figure 2 – Viper™CE Cradle Complete Functioning

The LEDs positioned on the front part of the Viper™CE cradle (see figure below)

indicate the cradle status:

Figure 3 - LED Indicators

LED STATUS

Charger Green pulse: it is on for a few seconds when the external

supply or the battery supply has been

recognized.

Green blinking: slow charge.

Red constant: charging.

Green constant: charge completed.

Red/Green: they turn on alternatively while discharging.

Orange blinking: error.

IrDA Red blinking: transmitting data.

Power Green: it is constant when the cradle is on.

Extra battery

charge

Data transmission

INSTALLATION

2 INSTALLATION

2.1 MOUNTING THE CRADLE

The Viper™CE cradle consists of a cradle and a base and can be mounted for

portable or fixed desktop usage.

The Viper™CE cradle package contains the following:

Viper™CE Cradle 4 rubber feet

This User's Manual 2 screws

CD-ROM 1 CAB-417 RS232 cable

2.1.1 Portable Desktop Use

Rubber foot seat (4)

Figure 4 - Rubber Foot Placement

For desktop use, proceed as follows:

1. Referring to Figure 4, carefully clean the rubber feet seat of the base to remove

any impurities that could reduce adhesion.

2. Remove the protective plastic from the rubber feet and stick them onto the

bottom surface of the base.

3. Insert the cradle into the base.

Viper™CE Cradle

2.1.2 Fixed Desktop Use

Fixing screw (2)

Figure 5 - Fixing Screw Placement

Before performing the following operation it is necessary to detach the cradle from its

base by holding the base and pushing the cradle upwards.

For fixed desktop installation proceed as follows:

1. Position the base on the desired surface;

2. Fix it on the surface by means of the two screws shown in the figure above.

3. Insert the cradle into the base.

Inhaltsverzeichnis

Andere Datalogic Dockingstation Handbücher

Datalogic

Datalogic Memor 1 Bedienungsanleitung

Datalogic

Datalogic DL-AXIST Single Ethernet Dock Bedienungsanleitung

Datalogic

Datalogic Lynx D Bedienungsanleitung

Datalogic

Datalogic JOYA X2 Single Slot Dock Bedienungsanleitung

Datalogic

Datalogic MEMOR K Single Slot Dock Bedienungsanleitung

Datalogic

Datalogic Memor 1 Bedienungsanleitung

Datalogic

Datalogic Lynx D Bedienungsanleitung

Datalogic

Datalogic MEMOR 20 Bedienungsanleitung

Datalogic

Datalogic Memor 10 Bedienungsanleitung

Datalogic

Datalogic DH60 Bedienungsanleitung

Datalogic

Datalogic Four Slot Dock Bedienungsanleitung

Datalogic

Datalogic Jet Bedienungsanleitung

Datalogic

Datalogic Falcon X3 Bedienungsanleitung

Datalogic

Datalogic Skorpio Bedienungsanleitung

Datalogic

Datalogic J Series Bedienungsanleitung

Datalogic

Datalogic OM-GRYPHON SERIES Bedienungsanleitung

Datalogic

Datalogic DL-AXST Single Slot Dock Bedienungsanleitung

Datalogic

Datalogic Elf/Falcon X3 Bedienungsanleitung

Datalogic

Datalogic ELF Bedienungsanleitung

Datalogic

Datalogic JoyaTouch Bedienungsanleitung

Datalogic

Datalogic Memor X3 Bedienungsanleitung

Datalogic

Datalogic Kyman-NET Single Cradle Desk Bedienungsanleitung

Datalogic

Datalogic Memor Bedienungsanleitung

Datalogic

Datalogic Elf 4SD Bedienungsanleitung

Beliebte Dockingstation Handbücher anderer Marken

Sony

Sony Dream Machine XDR-DS12iP Bedienungsanleitung

Acer

Acer USB Type-C Dock II Bedienungsanleitung

ATEN

ATEN UC-2000 Bedienungsanleitung

Xcellon

Xcellon HDD-202 Bedienungsanleitung

Dok

Dok CR09 Bedienungsanleitung

Philips

Philips BTM630/12 Bedienungsanleitung

IOGear

IOGear Travel Pro GUD3C09 Bedienungsanleitung

RKI

RKI SDM-E2 Bedienungsanleitung

iHome

iHome iP15 Bedienungsanleitung

VITURE ONE

VITURE ONE MOBILE DOCK Bedienungsanleitung

Lindy

Lindy 42984 Bedienungsanleitung

CipherLab

CipherLab 8001 Bedienungsanleitung

Pyle

Pyle PIPDSP2 Bedienungsanleitung

Avol

Avol AS2350 Bedienungsanleitung

Philips

Philips DC190/79 Bedienungsanleitung

Targus

Targus DOCK315EUZ Bedienungsanleitung

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUBX2082808a Bedienungsanleitung