Datasheen D902AC Bedienungsanleitung

D902ACADSL2/2+ Combo Router

User Manual

V1.3

Datasheen D902AC User Manual

Page 2 Total 25 Pages

CONTENTS

1.OVERVIEW.......................................................................................................................................................3

1.1ABOUTADSL......................................................................................................................................3

1.2ABOUTADSL2/2+...............................................................................................................................3

1.3 FEATURES...........................................................................................................................................3

2 SPECIFICATION..............................................................................................................................................4

2.1 INTERFACE INTRODUCTION..........................................................................................................4

2.1.1 INDICATOR AND INTERFACE..................................................................................................4

2.1.2 SPLITTER SPEC...........................................................................................................................4

2.2 HARDWARE CONNECTION.............................................................................................................4

2.3 LED STATUS INDICATION................................................................................................................5

3. CONFIGURATION..........................................................................................................................................6

3.1 DEFAULT CONFIGURATION............................................................................................................6

3.2 COMPUTER CONFIGURATION........................................................................................................6

3.3ADSLMODEM CONFIGURATION...................................................................................................6

3.3.1 LOG IN..........................................................................................................................................6

3.3.2 SAVE SETTING............................................................................................................................6

3.4WAN CONFIGURATION ....................................................................................................................7

3.4.1 CONFIGURATION GUIDE..........................................................................................................7

3.4.2 RFC1483 BRIDGE CONFIGURATION.......................................................................................9

3.4.3 PPPOE CONFIGURATION........................................................................................................ 11

3.4.4 STATIC ADDRESS.....................................................................................................................12

4 OTHER CONFIGURATION .........................................................................................................................13

4.1 LAN CONFIGURATION...................................................................................................................13

4.1.1 CONFIGURATION OF MODEM’S IP ADDRESS....................................................................13

4.1.2 DHCP CONFIGURATION .........................................................................................................13

4.2 PASSWORD CONFIGURATION......................................................................................................14

5 USAGE OF USB INTERFACE......................................................................................................................15

5.1 DRIVERAUTOMATIC INSTALLATION.........................................................................................15

5.2 DRIVERAUTOMATIC UNINSTALLATION...................................................................................17

5.3 DRIVER MANUAL INSTALLATION ..............................................................................................17

5.4 DRIVER MANUAL UNINSTALLATION.........................................................................................20

5.5 CONFIGURATION OF "USB REMOTE NDIS NETWORK DEVICE"...........................................23

6. TROUBLESHOOTING.................................................................................................................................24

6.1 UNABLE TOACCESS INTERNET ..................................................................................................24

6.1.1 CHECK THE LINE AND THE DEVICE ...................................................................................24

6.1.2 CHECK YOUR CONFIGURATION ..........................................................................................24

ANNEX：SHIPPING LIST...............................................................................................................................25

Datasheen D902AC User Manual

Page 3 Total 25 Pages

1.OVERVIEW

1.1ABOUT ADSL

An ADSL MODEM is a broadband Internet access device, which utilizes the high frequency segment of

the phone line to transmit high-speed data without affecting the voice transmission. The frequency of the ADSL

signal is higher than that of voice, so voice and ADSL signal can coexist in one line by using a splitter to

insulate each from the other. ADSL data transfer adapts the asymmetry model. It supports upload transmission

speed up to 1Mbps and download speed up to 8 Mbps (24Mbps for ADSL2+). ADSL is an ideal device for

broadband access.

1.2 ABOUT ADSL2/2+

Transmission performance of ADSL2 is improved comparing with the first generation of ADSL. These

improvements are mainly concerned with long distance, anti-line-loss, anti-noise, etc. By doubling the

transmission bandwidth, ADSL2+ has implemented a downlink rate as high as 24 Mbps. Therefore, Internet

applications such as synchronous transmission of multi video stream, online games and huge capacity of

downloading files are made possible.

1.3FEATURES

1、Support ANSI T1.413 ISSUE 2、ITU G.992.1 (G.DMT)、ITU G.992.2 (G.LITE)、ITU G992.3、

ITU G992.5

2、Web-based configuration and monitoring.

3、Support multiple PVCs.

4、Routing function.

5、NAPT、DHCP function.

Datasheen D902AC User Manual

Page 4 Total 25 Pages

2 SPECIFICATION

2.1 INTERFACE INTRODUCTION

2.1.1 INDICATOR AND INTERFACE

Table 2.1

ITEM Name State introduction

Indicator

POWER A steady red light means the power connection works properly

LINK Yellow, shows DSL line status.

DATA Green, Flashing means the Modem is transmitting or receiving

data

PC Three color, Indicates status of connection to the PC

Interface

LINE Connected with phone line or “ADSL” port of the splitter.

ETHERNET

To be connected to a PC network card by a straight-through

network cable, also can use a crossover cable to connect to Hub,

Switch or Router.

USB To be connected to a PC USB interface by a USB line.

POWER Power interface, Connect with power adapter.

RST

Reset to default setting.

Press the reset button and turn on the power, then keep pressing

the reset button for 5 seconds. Then you can reset the modem

with the default settings.

SWITCH To turn on / off the power.

2.1.2 SPLITTER SPEC Table 2.2

Interface Introduction

LINE Connected with telephone line

ADSL

Connect with the LINE port of the

ADSL Modem using telephone

line provided.

PHONE Connect with telephone

2.2 HARDWARE CONNECTION

Figure 2.1

Datasheen D902AC User Manual

Page 5 Total 25 Pages

Introduction：

1、Use a telephone cord to connect the LINE port of the splitter with the RJ-11 port (the phone jack) on

the wall.

2、Use another telephone cord to connect the ADSL port of the splitter with the LINE port of the ADSL

Modem.

3、Use another telephone cord to connect the telephone set with the PHONE port of the splitter.

4、Connect Ethernet port of the ADSL MODEM with 10/100BASE-T port of the computer using the

network cable that comes with the modem.

5、Plug in the power cord, and turn on the power.

If you do not want Internet services and telephone voice services simultaneously, please just connect the

LINE port of the ADSL Modem with the RJ-11 port (the phone jack) on the wall using a telephone cord. In this

case, the splitter is not necessary.

2.3 LED STATUS INDICATION

Table 2.3

Steady light Flashing Fast flashing Off

POWER (red) Power on / / Power off

LINK(yellow) The modem is in

good connection

In handshaking status / Connection not set up

DATA (green) Wan is connected / Transmitting or

receiving data

Wan is not connected

Green Ethernet line is

connected

/ Ethernet is

Transforming data

Ethernet line not connected

properly

Red USB is connected USB is Transforming

data

USB is not connected

properly

Orange USB and Ethernet

are connected

USB and Ethernet are

Transforming data

USB and Ethernet are not

connected properly

Datasheen D902AC User Manual

Page 6 Total 25 Pages

3. CONFIGURATION

3.1 DEFAULT CONFIGURATION

ADSL MODEM has pre-configured with the VCI/VPI which is in common use. The default dial-up mode

is bridge encapsulation. For bridge mode, no need to configure any more parameter. However, the third party

dial-up software is needed for connection with the Internet.

3.2 COMPUTER CONFIGURATION

The default IP address for ADSL MODEM is: 192.168.1.1; The Subnet Mask is：255.255.255.0. Users can

configure ADSL MODEM through an Internet browser. ADSL MODEM can be used as gateway and DNS

server; users need to set the computer’s TCP/IP protocol as follow:

1、Set the computer IP address at same segment of ADSL MODEM, such as set the IP address of the

network card to one of the “192.168.1.2”～“192.168.1.254”.

2、Set the computer’s gateway the same IP address as the ADSL Modem’s.

3、Set computer’s DNS server the same as ADSL Modem’s IP address or that of an effective DNS server.

3.3 ADSL MODEM CONFIGURATION

3.3.1 LOG IN

Open the browser; input http://192.168.1.1 at the address column. Press “Enter” key then the entry dialog

box will show up as Figure 3.1. Input Username: admin ,Password: password (capital sensitive), then press

Enter.

Figure 3.1

3.3.2 SAVE SETTING

After getting through each page for parameters setting, click “Save” or “Save apply” to store the value in

ADSL MODEM. Briefly, we named “Save”.

Datasheen D902AC User Manual

Page 7 Total 25 Pages

Note

：

When you save the settings, the web page will be refreshed slowly, please wait it finished.

After you save the settings, it will take effect until next reboot.

Some settings only take effect after rebooting the router.

3.4 WAN CONFIGURATION

If the configuration is bridge encapsulation, there is no need to configure any more parameters. Only need

to use the third party dial-up software to connect the Internet.

Totally, this router supports：PPPoA、PPPoE、MER、IPoA、Bridging. For detail configuration information,

please check the following configuration guide.

3.4.1 CONFIGURATION GUIDE

Click “WAN” on the left page, enter into “WAN” configuration page.

Note: At most we can have eight connections. If you need to add a new connection, please delete or modify

an existing connection.

Figure 3.2

Click on the next connection which you want modify. Press “Edit” button, enter the configure guide, as

Figure 3.3

Datasheen D902AC User Manual

Page 8 Total 25 Pages

Figure 3.3

The value for VPI/VCI is assigned by your ISP. After inputting the PVC value, press “Next” into

“connection type”. As Figure 3.4.

Figure 3.4

The Modem supports five ADSL protocol modes. Choose the protocol which is appointed by ISP and PVC

Datasheen D902AC User Manual

Page 9 Total 25 Pages

encapsulation, click “Next” enter to the protocol configure. Below, we introduce the configuraion of the

five protocol modes.

• PPPoverATM(PPPoA) • PPP over Ethernet (PPPoE)

• MAC Encapsulated Routing (MER) • IP over ATM (IPoA)

• Bridging

Some connection lines need to confirm the LLC or VC, if you can’t confirm, please don’t modify the

default value or ask your ISP.

3.4.2 RFC1483 BRIDGE CONFIGURATION

Select the Bridging mode. Then press “Next” to specify the Service Name, and select the “Enable Service” as

Figure 3.5.

Figure 3.5

Press “Next” to enter into “WAN configuration”, click “save” to save configuration, if you need to modify

the parameter, click “back” as Figure 3.6.

Datasheen D902AC User Manual

Page 10 Total 25 Pages

Figure 3.6

Note

：

When you use bridge mode, please close “DHCP SERVER”, the result as Figure 3.7

Figure 3.7

Andere Handbücher für D902AC

Inhaltsverzeichnis

Andere Datasheen Netzwerk-Router Handbücher

Datasheen

Datasheen D902AC Bedienungsanleitung

Datasheen

Datasheen D902AW Bedienungsanleitung

Datasheen

Datasheen D316S Bedienungsanleitung

Datasheen

Datasheen D902AS Bedienungsanleitung

Datasheen

Datasheen D326S Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise