Datecs LineaPro 7 Industrial Bedienungsanleitung
1 DATECS
LineaPro 7 Industrial
User Manual
1 DATECS LINEAPRO 7 INDUSTRIAL USER MANUAL
UM 07.01.12/v1.0.0 2
LEGAL NOTICE
THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL
OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM DATECS LTD.
Address: 4 Datecs Street, Sofia 1592, Bulgaria
Phone: +359 2 816 55 50
Fax: +359 2 816 55 65
E-mail: [email protected]
1 DATECS LINEAPRO 7 INDUSTRIAL USER MANUAL
UM 07.01.12/v1.0.0 3
REVISION HISTORY
Version
Data
Change description
1.0.0
14.12.2017
First Release
2.0.0
10.03.2020
Added Section “Regulatory”
1 DATECS LINEAPRO 7 INDUSTRIAL USER MANUAL
UM 07.01.12/v1.0.0 4
CONTENTS
REGULATORY........................................................................................................................................................................... 5
TECHNICAL SPECIFICATIONS ................................................................................................................................................... 6
GENERAL VIEW........................................................................................................................................................................ 8
GETTING STARTED................................................................................................................................................................. 10
ATTACHING APPLE DEVICE TO LINEAPRO 7 INDUSTRIAL..................................................................................................... 11
REPLACING BATTERY OF LINEAPRO 7 INDUSTRIAL.............................................................................................................. 13
OPERATION MODES .............................................................................................................................................................. 15
SCANNING BARCODES ............................................................................................................................................................. 15
CONTACTLESS CARDS READING.................................................................................................................................................. 16
TRANSFERRING DATA BETWEEN APPLE DEVICE AND PC OR MAC..................................................................................................... 17
TURN OFF DEVICE FUNCTION .................................................................................................................................................... 17
CHARGING APPLE DEVICE......................................................................................................................................................... 17
UPDATING FIRMWARE ............................................................................................................................................................ 17
CARE, MAINTENANCE AND WARRANTY............................................................................................................................... 18
1 DATECS LINEAPRO 7 INDUSTRIAL USER MANUAL
UM 07.01.12/v1.0.0 5
REGULATORY
FCC ID: YRW-LINEAPRO7I
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on.
Any change or modification to the product not expressly approved by Datecs Ltd could void the
user's authority to operate the device.
RF Exposure Information and Statement
This transmitter must not be in co-location or operating in conjunction with any other antenna or
transmitter. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.This device should be installed and operated with a minimum distance of 5 mm
between the device and your body.
ISED Statement
This device complies with license-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause
undesired operation.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.”
1 DATECS LINEAPRO 7 INDUSTRIAL USER MANUAL
UM 07.01.12/v1.0.0 6
TECHNICAL SPECIFICATIONS
Keyboard and Buttons
Two Scan buttons
Reset device button
Contactless Card Reader
(optional)
Supports:
ISO/IEC 14443 Type-A/MIFARE
- MIFARE MINI
- MIFARE CLASSIC-1K, MIFARE CLASSIC-4K
- MIFARE ULTRALIGHT, ULTRALIGHT-C
- MIFARE PLUS 2K/4K
- MIFARE DESFire
- and other
ISO/IEC 14443 Type-B
- supports most of the cards
ISO/IEC 15693
- supports most of the cards
JIS X 6319-4
- compatible with FeliCa
ISO/IEC 18000-3 mode 3
- NFC
2D Barcode Reader
2D Opticon MDI-4000* CMOS Imager 640 x 480 pixels (optional)
2D Motorola SE4750/PL3307 CMOS Imager 1280 x 960 pixels, Laser Aim (optional)
Supported 1D and 2D
Symbology*
BARCODE 1D: JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11,
Code 39, Code 93, Code 128, GS1-128 (EAN-128), GS1 DataBar (RSS),
IATA, Industrial 2of5, Interleaved 2of5, ISBN-ISSN-ISMN, Matrix 2of5, MSI/
Plessey, S-Code, Telepen, Tri-Optic, UK/ Plessey POSTAL CODE: Chinese
Post, Intelligent Mail Barcode, Korean Postal Authority code, POSTNET
2D CODE: Aztec Code, Aztec Runes, Chinese Sensible code, Codablock F,
Composite codes, Data Matrix (ECC200), Passport MRZ (OCR-B), Maxi Code
(mode 2~5), MicroPDF417, Micro QR Code, PDF417, QR code
Connectivity
Apple 9 pin connector
Pass-through sync through USB type-C
Pass-through sync through via GT1 or GT5
Bluetooth 3.0 Class 2 (option)
- SPP - Serial Port Profile
SAM holder
Device Compatibility
Apple iPhone 7 and iPhone 8
Audio Features
Electro-Magnetic Buzzer
Power Supply
DC 5V through USB type-C
DC 5V through Datecs charging station
Battery
Rechargeable Li-Ion Battery 3.6V / 2400mAh
Precise battery management by Fuel Gauge microcontroller for remaining battery
capacity
Certificates
IP65
Dimension W x H x D, mm
75.1 x 25.6 x 157.4
Weight, g
Operational temperature range
-10 °C to +40 °C / 5 to 90% RH
Storage temperature range
-20 °C to +50 °C / 5 to 90% RH
Compatible Accessories
Single charger (GT1)
5 stations charger (GT5)
Dual Charger
* Specification can be change without any notice.
1 DATECS LINEAPRO 7 INDUSTRIAL USER MANUAL
UM 07.01.12/v1.0.0 7
Use only original equipped DATECS cable USB-A to USB-C (Z05C000000-05) for
charging Apple device.
Use only UL approved USB adapters. The minimum requirements of USB
adapter is 5V/2.1A!
Waste Electrical & Electronic Equipment
The symbol means that according to local laws and regulations your product
shall be disposed of separately from household waste at the end of its working
life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material
resources.
1 DATECS LINEAPRO 7 INDUSTRIAL USER MANUAL
UM 07.01.12/v1.0.0 8
GENERAL VIEW
1 DATECS LINEAPRO 7 INDUSTRIAL USER MANUAL
UM 07.01.12/v1.0.0 9
1. Barcode engine
7. Opening for
2. Back Cover
8. Linea battery cover lock/unlock lever
3. On/Off button of Apple device
9. Battery cover
4. Left and Right scan buttons
10. External features connector
5. USB type-C connector
6. Volume buttons of Apple device
1 DATECS LINEAPRO 7 INDUSTRIAL USER MANUAL
UM 07.01.12/v1.0.0 10
GETTING STARTED
LineaPro 7 Industrial has rechargeable Li-ion battery. Can be charge from USB port or External features
connector.
Before first use, battery must be fully charged.
If the device is fully discharged, charging time to fully charged would be approx.
4 hours and 30min.
Depends of the settings, LineaPro 7 Industrial can pass-through input power supply from USB
connector or External features connector to Apple device. Charging current to Apple device can be
selected.
Charging form USB adapter:
Inhaltsverzeichnis
Andere Datecs Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
