Daviscomms MTD1000 Bedienungsanleitung
500151R04
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential
MTD1000/Evaluation Kit
User Guide
500151R04
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 1 of 23
2
3
4
5
6
Contents
Preface Page No.
1System Overview ---------------------------------------------------------------------------------------- 2
2Product Package Overview --------------------------------------------------------------------------- 7
3Interfacing the MTD1000/ Evaluation kit for AT commands communication ------------- 17
4Firmware Downloading --------------------------------------------------------------------------------- 19
5Terminology ----------------------------------------------------------------------------------------------- 23
1. System Overview
1.1 MTD1000 ---------------------------------------------------------------------------------------------------
1.2 Family of options available for MTD1000 hardware configurations--------------------------
1.3 Understanding the product code of your hardware ---------------------------------------------
1.4 Part Description of MTD1000 -------------------------------------------------------------------------
1.5 Data connector pin functions and RS232 TX & RX connection diagram ------------------
2. Product Package Overview
2.1 MTD1000 Evaluation kit package description ---------------------------------------------------- 7
2.2 Installation and starting up on the MTD1000 ----------------------------------------------------- 9
2.3 LED indicators description ----------------------------------------------------------------------------12
2.3.1 Red LED (Charging Indicator) ---------------------------------------------------------- 12
2.3.2 Green LED (GSM Indicator) ------------------------------------------------------------ 12
2.3.3 Yellow LED (GPS Indicator) ------------------------------------------------------------ 12
3. Interfacing the MTD1000/ Evaluation kit for AT commands
communication
3.1 Hyper-terminal Settings ------------------------------------------------------------------------------- 13
3.2 Evaluation kit ---------------------------------------------------------------------------------------------16
3.2.1) Evaluation kit usage description ------------------------------------------------------ 16
3.2.2 Full hardware setup for MTD1000 with evaluation board ---------------------- 16
3.3 Jumper pin orientation --------------------------------------------------------------------------------17
3.3.1) Possible jumper selection configurations ------------------------------------------17
3.3.2) Jumper default positions description ------------------------------------------------ 18
4. Firmware Downloading
4.1 TR-800 GSM/GPRS Module Firmware Downloader ----------------------------------------- 19
4.2 Use of the MTD1000 firmware downloader setup guide ------------------------------------ 19
4.3 Hardware setup for flashing of firmware -------------------------------------------------------- 19
4.4 TR-800 programmer graphics user interface (GUI) setup ---------------------------------- 19
5. Terminology
5.1 GSM ---------------------------------------------------------------------------------------------------- 23
5.2 SIM CARD -------------------------------------------------------------------------------------------- 23
5.3 GPS ---------------------------------------------------------------------------------------------------- 23
5.4 GPRS -------------------------------------------------------------------------------------------------- 23
5.5 SMS ---------------------------------------------------------------------------------------------------- 23
5.6 Hyper-terminal --------------------------------------------------------------------------------------- 23
500151R04
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 2 of 23
1. System Overview
1.1 MTD1000
The MTD1000 is a small, economical and low cost, high quality multi-purpose GPS/ GSM tracking
solution for personal and vehicle tracking. It can also be used as 2-way telemetry to control relays
and transmit short messages. With battery embedded, it can remain on standby for at least 24 hours.
It transmits the GPS data by using GPRS/SMS.
For efficient data management, it comes with a memory capacity of 6,000 full detail reports that
include position, date, time, system and input/output ports status enabling continuous recording of
position and time. The data can be downloaded either over-the-air or stored for downloading at a later
time.
The MTD1000 is capable of producing it own unique device ID.
Field Applications:
•Vehicle tracking device (GSM or GSM/ GPS)
•Anti-theft (GSM or GSM/ GPS with tilt sensor or equivalent)
•Personal emergency alert with panic button
•2-way telemetry
500151R04
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 3 of 23
1.2 Family of options available for MTD1000 hardware configurations
Options available for MTD1000
•With/ Without Panic button
•With Power connector DC jack or 2 pin power connector
•With/ Without Mounting Flange (5mm diameter hole each)
•Adaptor Chargers for Europe or USA
Model: MTD1000 -IE2N3F
-Embedded GPS antenna.
-External GSM antenna
-Easy in-vehicle mounting flange installation
option.
Model: MTD1000 -EIDN3F
-Embedded GSM/GPRS antenna.
-External GPS antenna
Model: MTD1000 -IIDN3F
-Embedded GSM/GPRS antenna
-Embedded GPS antenna
-Easy in-vehicle mounting flange installation
option.
Model: MTD1000 -EEDN3F
-External GSM/GPRS antenna
-External GPS antenna
-Easy in-vehicle mounting flange installation
option.
500151R04
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 4 of 23
1.3 Understanding the product model of your hardware
The hardware product code as follows in your MTD1000
Model No: MTD1000 -xxxxxx
123456
Example 1:
Model No: MTD1000 -EIDN3F
123456
(1) External GPS,
(2) Internal GSM,
(3) DC Jack Power Connector,
(4) Without Tilt Sensor,
(5) 3 Input
(6) with Flow Control (CTS/RTS), thus 2 Output
Model number GPS GSM DC Jack Power
connector
With/
Without Tilt
Sensor No. of Input
ports
With/
Without
Flow
control
MTD 1000 -EIDN3F
GPS
"E" =External GPS Antenna
"I" =Internal GPS Antenna
GSM
"E" =External GSM Antenna
"I" =Internal GSM Antenna
Power Conn
"D" =DC Jack Power Connector
"2" =2-pin Jack Power Connector
Tilt Sensor
"Y" =With Tilt Sensor
"N" =Without Tilt Sensor
Number of Input Port
(Maximum 7 IO ports with maximum 4 output ports)
e.g. "1" =1 Input Port
"7" =7 Input Port
Serial with or without Flow Control
"F" =Serial with Flow Control (CTS/RTS) = 2 Input Port used
"S" =Serial without Flow Control = 0 Input Port
used
500151R04
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 5 of 23
1.4 PartsDescription of MTD1000
Data Connector
Power Connector
DC Jack or 2pin
(Option)
GPS Indicator
GSM Indicator
Charging Indicator
GPS
External
Antenna
Connector
SMA
(option)
GSM External
Antenna Connector
SMA (option)
Panic
Button
(Option)
Mounting Flange
(Option)
3.7V/ 780mAh
Li-Polymer battery
3 Pin Li-Polymer
connector (Male)
3 Pin Li-Polymer
connector (Female)
MTD1000 Battery
compartment cover
SIM card insertion slot
500151R04
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 6 of 23
1.5 Data connector pin functions and RS232 TX & RX connection diagram
IN-3
IN-2
IN-1
IN-4
GND
OUT-3
RXD
OUT-1
TXD
OUT-2
CONNECTOR ON MTD1000 UNIT
(VIEW FROM OUTSIDE)
NOTE:
RXD IS DATA OUTPUT
FROM MTD1000 UNIT
TXD IS DATA INPUT TO
MTD1000 UNIT
21
6
3
7
4
8
5
9
D-9 FEMALE ON INTERFACE
CABLE (VIEW FROM OUTSIDE)
FOR CONNECTING TO PC
RS232 PORT D-9 MALE
D-9 Ports Description
Pin 1 Data Carrier Detect
Pin 2 Received Data, RxD
Pin 3 Transmitted Data, TxD
Pin 4 Data Terminal Ready
Pin 5 Signal Ground, GND
Pin 6 Data set ready
Pin 7 Request to send
Pin 8 Clear to send
Pin 9 Ring Indicators
500151R04
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 7 of 23
i. MTD1000 device (GSM/GPRS/ GPS)
The communication device that processes the GSM/GPRS and GPS functions.
ii. Power Adapter
1X Power adaptor (100 –240V~ 50/60Hz 650mA Max) for the MTD1000 device
1X Power adaptor (100 –240V~ 50/60Hz 650mA Max) for the evaluation kit
Power DC jack dimension: 3.5mm*1.35 mm
iii. GPS antenna (SMA connector) for the MTD1000 device
The receiver component required to receive GPS data to the MTD1000 device for
a location fix.
iv. RS232 standard 9 pin D female/ male connector cable
The interface cable which connect the evaluation kit serial connection (male) to
the serial comport (female) of your PC.
v. 10pin male data cable harness to RS232 standard 9 pin D male connector cable
The cable that interfaces from the MTD1000 to a serial comport connection of your
PC.
2.Product Package Overview
2.1 MTD1000 Evaluation kit package description
In the MTD1000 evaluation kit box,you will receive 10 items as described below.
500151R04
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 8 of 23
vi. GSM/GPRS antenna (SMA right angle)
The receiver component required to receive GSM/GPRS data to the MTD1000
device in a network cell location.
vii. Li-Polymer battery for MTD1000
An alternative solution to power up the MTD1000 without a power adaptor up to
24 hours.
Voltage/ current specification: (3.7V/ 780mAh)
viii. Evaluation PCB board (For development purposes on the MTD functionalities)
The communications unit which allows you to configure the input and output of the
MTD1000.
xi. 10 pin male/male data cable harness
For connection from the evaluation board to the MTD1000 device
500151R04
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 9 of 23
2.2 Installation and starting up on the MTD1000
Step 1
-Insert the SIM card (Not included in package)
-Connect the Li-Polymer battery to the into the MTD1000
Note: Do not use the internal Li-Ion battery beyond standard operating temperature of -10C to
+50C. The MTD1000 can function directly from DC power supply adaptor without the internal Li-
Ion battery.
Step 2
Adjust the battery cover into the catch and slide it into the back cover latch fully.
Andere Handbücher für MTD1000
1
Inhaltsverzeichnis
Andere Daviscomms GPS Handbücher
