DCS Lina Headphone Amplifier Bedienungsanleitung

Lina Headphone Amplifier

Getting Started Guide

dCS LINA Headphone Amplifier Getting Started Guide A5.indd 2 01/12/2021 16:08

View the full User Guide

To view the full User Guide for your LINA Headphone

Amplifier, visit https://dcsaudio.com/documentation

Document information

Published on: 14/10/2021

Document ID: DCS320681 - Rev1.0

Information contained in this manual is subject to change without notice, and whilst it is

checked for accuracy, no liabilities can be accepted for errors.

dCS is Data Conversion Systems Ltd. Company registered in England No. 2072115.

dCS is a registered trademark of Data Conversion Systems Ltd.

Other product and company names may be trademarks or registered trademarks of other

companies, and are the property of their owners. They are used only for explanation,

without intent to infringe.

What's in the box

dCS LINA Headphone

Amplifier Power cable (2m) Power Link cable

(0.5m)

Getting Started Guide Welcome letter

Front

Item Description

1¼" (6.35 mm) jack

output

Connect headphones.

24-pin balanced XLR

output

Connect headphones.

33-pin balanced XLR

output (left channel)

Connect headphones (for use together with

item4).

43-pin balanced XLR

output (right

channel)

Connect headphones (for use together with

item3).

5Rotary control Turn to change the volume.

Item Description

Power/Input

button When the unit is switched off, press to switch it on.

When the unit is switched on, press to change

input.

When the unit is switched on, press and hold for

2seconds to switch it off.

7Status indicator When the unit is on, the status indicator is bright

white, blue or magenta depending on the input.

8Gain selection switch Select the required gain.

Rear

Item Description

UNBAL.RIGHT

UNBAL.LEFT

Unbalanced RCA analogue inputs. Connects the

unit to an audio source.

BAL.RIGHT

BAL.LEFT

Balanced XLR analogue inputs. Connects the unit to

an audio source.

BAL.RIGHT

BAL.LEFT

Buffered, balanced XLR analogue inputs. Connects

the unit to an audio source.

POWERLINK

RJ45 input. Connects the unit to other LINA units to

enable Power Link.

5Power socket, fuse,

and power switch

Power is connected via a standard IEC320

connector, with a power switch and a fuse holder.

Setting up

1 2

Connecting the LINA range

To connect the LINA Network DAC, LINA Master Clock and LINA

Headphone Amplifier together:

1. Position the LINA range.

2. Connect the LINA Network DAC to the LINA Headphone Amplifier.

3. Connect the LINA Master Clock to the LINA Network DAC.

1. Positioning the LINA range

You can position the units in one of the following ways:

• Place the units side by side.

• Stack the units vertically in the following order:

• LINA Headphone Amplifier at the bottom

• LINA Master Clock in the middle

• LINA Network DAC on top

To prevent overheating, we recommend that you leave some

space around the units to allow for ventilation.

2. Connecting the LINA Network DAC to the LINA

Headphone Amplifier

You can connect the LINA Network DAC to the LINA Headphone Amplifier

using the balanced XLR sockets.

1. Using two balanced XLR cables, connect the

BAL.LEFT

and

BAL.RIGHT

outputs on the LINA Network DAC to the

BAL.LEFT

and

BAL.RIGHT

inputs on the LINA Headphone Amplifier.

2. On the LINA Headphone Amplifier, choose the unbuffered XLR

input. If the status indicator is not white, press the

Power/Input

button until it changes to white.

►

For more information, see "Changing the source input" on

page12.

3. Connecting the LINA Master Clock to the LINA Network

DAC

You can lock the network and USB inputs on the LINA Network DAC to the

LINA Master Clock.

1. Switch on the LINA Network DAC and the LINA Master Clock.

2. On the LINA Network DAC, choose the network or USB input.

3. Using two BNC cables, connect the

WORDCLOCK

output

sockets on the LINA Master Clock to the

WORDCLOCK

input

sockets on the LINA Network DAC.

4. Set the clocking sync mode on the LINA Network DAC to Auto .

The LINA Network DAC selects the appropriate clock input and

locks to it.

If you lock an AES or SPDIF input on the LINA Network DAC to

the LINA Master Clock, the source equipment will not be locked

to the Clock, resulting in periodic clicks, dropouts or distortion.

To use the LINA Network DAC in this way, use source equipment

that has a word clock input and a Master Clock with extra

outputs.

Connecting inputs

You can use the input sockets on the LINA Headphone Amplifier to

connect source audio equipment, such as DACs.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere DCS Verstärker Handbücher

DCS

DCS LINA Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung