Deda Elementi SL38C Bedienungsanleitung

zero2

alloy wheelset

USER’S MANUAL

Ver. 0 – Febbraio / February 2017 ©Deda Elementi

Congratulations on your new Deda Elementi wheels.

Please read these instructions carefully and follow

them for correct use. An improper installation or wrong

application of the instructions could damage the

product, that will be no more covered under warranty,

damage the bicycle or cause an accident resulting in

injury or death. Since speciﬁc tools and experience are

necessary for proper installation, it is recommended

that the product be installed by an oﬃcial Deda

Elementi dealer or a qualiﬁed bicycle technician.

GENERAL SAFETY INFORMATION

It is the user’s responsibility to examine the product

on a regular basis to determine the need for service

or replacement. Wheels and their components are

products that wear from normal use of the bicycle, for

that reason we recommend cyclists to regularly inspect

their bicycle and parts in order to detect any damage. If

any doubts or problems occurr, discontinue riding the

wheels and have them inspected by an oﬃcial Deda

Elementi dealer or a qualiﬁed bicycle technician.

• These wheels have been designed and intened to

be used on normal paved surfaces. In case of use

on not paved surfaces or oﬀ-road, wheels can be

subjected to damages, loose their functioning and

cause serious accidents and injury for the user.

• Regularly check the wheels to be certain they

are installed correctly to the bicycle and fastened

securely to the frame and fork through the quick

releases.Anincorrectinstallationofthequickrelease

canresultinthewheelseparationfromtheforkand

cause serious accidents and injury for the user.

• If any bicycle fall or accident occur, discontinue

riding the wheels and have them inspected carefully

by an oﬃcial Deda Elementi dealer or a qualiﬁed

bicycletechnician.Theuseofanydamagedbicycle

part can cause serious accidents and injury for the

user.

• Deda ZERO2 wheels use aluminum rims that

requirespecicbrakepadsforaluminumrimsonly.

Anyotherdierentbrakepad,asthoseintendedfor

carbon rims, can cause malfunctions or decrease

the braking performance and cause serious

accidents and injury for the user.

• Bicycle rim is a component subjected to wear

even during normal riding conditions. Inspect the

rim brake surface regularly and discontinue in

case of damages or doubts on the wear status of

the component. In case the rim replacement be

required, plase contact an oﬃcial Deda Elementi.

The continous use of a worn rim damage the

brakingeciency,causethecomponentfailureand

cause serious accidents and injury for the user.

• Installonlybicycletirescompatiblewithrimstechnical

specications included in this user’s manual. The

installation of tires not compatible can damage the

rim wheels, invalidate the Deda Elementi Warranty

and cause serious accidents and injury for the user.

• Follow the minum and maximum ination pressure

recommended by the tire manufacturer. The use

of ination pressures out of this range invalidate

the Deda Elementi Warranty and cause serious

accidents and injury for the user.

• ReadthewholeUser’sManualcarefullyandkeepit

in a safe place for later reference.

WARRANTY

Deda Elementi warrants that all Deda Elementi to be

free from defects in materials or workmanship for a

period of two years after original purchase unless

otherwise stated on the Warranty policy.

The Warranty is valid for the purchase of an origianl

Deda Elementi product only.

LIMITS OF WARRANTY

• Incasodisaleorproductcession,theWarrantywill

be considered valid for a two yeras period only from

the original purchace.

• The Warranty doesn’t cover damages caused by

modications, even small; any kind of adaptions

or aletration; maintenance performed by an

unauthorized people; use of the product outside the

normal riding conditions on paved road surfaces.

TheWarrantydoesn’tcoverevendamagescaused

by impacts, collisions, falls that may occurr for

accidental reasons.

• TheWarrantydoesn’tcoverdamagestothecarbon

wheels casued by using brake pads not original

Deda Elementi, even if speciﬁc for carbon rims.

• The Warranty doesn’t cover aesthetic defetcs like:

matting, chap, fading or other phenomenons that

may occur to the wheels during the use and after the

bicycle cleaning using water in pressure, solvents or

similar products, petrol.

• Incaseofimperfections,defetcsordamagesfound

ontheproduct,theuserisaskedtoentryincontact

with the dealer within 10 (ten) days; after this periond

ends the Warranty will be no more considered

eligible.

Deda Elementi reserves the right to modify partially

or completly the products, instructions and warranty

without any notice to the customer.

PACKAGING

TheWheelspackageyouhavejustpurchasedcontains

thefollowingitems:

• TheWheels

• User’sManual

• QuickReleases

• RimTapes

English

SPROCKETS INSTALLATION

Deda Elementi wheels are available with Shimano®

/ Sram® 10-11 speed cassette and Campagnolo®

10-11 speed cassette. Read and carefully follow the

installationinstructionsofthesprockets.

The rear wheel with Shimano® freehub body is

supplied with a 1.80mm aluminum spacer that is

intended to be used with Shimano® /Sram® 10

speed cassette only . Please don’t use 1.80mm spacer

with 11 speed cassette.

WARNING: Since specific tools and experience are

necessaryforproper sprocketsinstallation,incaseof

doubts it is recommended that the product be installed

by an official Deda Elementi dealer or a qualified

bicycle technician. An incorrect sprockets installation

can cause serious accidents and injury for the user.

WARNING: Please make sure that wheel freehub

body be compatible with your sprockets cassette

before proceed with the assembly. Failure to insure

compatibility between wheel and sprockets cassette

can cause malfunction of the bicycle drive train

resulting in serious accident and injury for the user.

WHEELS INSTALLATION INSTRUCTIONS

• Insertthequickreleaseintohubsothattheleverbe

on the non drive side of the wheel and tighten the

quickreleasenutslightlyontheoppositesideofthe

lever.(Note:frontquickreleaseisshorterthanrear)

• Installthefrontandrearwheelrespectivelyintothe

forkandframedrop-outs.

• Tightenthequickreleasenutuntillisincontactwith

theforkorframedrop-outs.

• ClosethequickreleaseleverfromtheOpen tothe

Closed position; if necessary adjust the closing

force manually through the nut (tightening the force

increases,untighteningtheforcedecreases)(Fig.2).

WARNING: Since specific experience is necessary

for proper wheels installation, in case of doubts it is

recommended that the product be installed by an

official Deda Elementi dealer or a qualified bicycle

technician. An incorrect wheels installation can cause

serious accidents and injury for the user.

WARNING:Whileadjustingtheclosingforcemanually,

pleasemakesuredonottightenoruntightenthenut

too much. A ½ turn of rotation can result in the non

closing of the wheel or excessive closing force of the

wheel.  The improper adjusting of the wheel closing

can cause serious accidents and injury for the user.

• Whentheleverisclosed,makesureitiscompletly

closed(fulltravel)anddonotallowtheframeorfork

toinhibitthecompleteclosingofthelever(Fig.3).

• Check before every ride the closing force of the

wheelandcorrectmechanismfunctioningofquick

releases.

WARNING:Aftercleaningthebicycleorarideinrain

conditions, please lubricate pivot and cam points in

order to prevent oxidation phenomenons that damage

thecorrectmechanismfunctioningofquickreleases.

TECHNICAL SPECIFICATIONS:

OK NO!

Fig3

TIRES

ZERO2 wheels are designed to use clincher

tires with inner tubes only. Check tires and inner

tubes dimensions according to the rim technical

specifications included in this user’s manual.

WARNING: Do not use tubular or tubeless tires with

this wheel. The use of non compatible tires with this

wheel can cause sudden and unexpected loss of

pressure, loss of control and tire failure resulting in

serious accident and injury for the user.

• Before the tire installation check that rim tape is

already installed in the right position inside the rim; if

not please install first the rim tape.

• Makesuretherimtapecoveralltherimbedholes

along the entire circumference of the wheel.

• Thevalveholeontherimtapehastobeplacedat

the same position of the valve hole of the rim wheel

(Fig.1).

• Installthetireon the wheeland proceedewithtire

inflation as per tire manufacturer recommandations.

WARNING: Never exceed the maximum inflation

pressure recommended by the wheels manufacturer

as indicated in this user’s manual. Excessive tire

pressures could damage the rim structure resulting in

serious accident and injury for the user.

WARNING: Tire installation requires a specific

experience of the product, in case of doubts please

contact an official Deda Elementi dealer or a qualified

bicycle technician. During tire installation don’t use

tools or tire lever that can fold, damage or fragilize

the rim edge. An incorrect tire installation can cause

serious accidents and injury for the user.

Fig 1

Rim tape

Valve hole

Closed Open

Fig2

Modello Ruote SL38C

Cassette

Compatibility

10v Shimano / Sram (with

1.80mm spacer)

11v Shimano

10-11v Campagnolo

Rim

Size 622x16C

Width 21.5mm

Height 25.0mm

RimTape 622x17mm

Tire

Compatibility Clincher

Hubs

Front 100mm

Rear 130mm

Recommended

TiresSizes min700x23-max700x32

Spokes

Front 284mm;at;

straight pull

RearNon

Drive side

297mm;at;

straight pull

RearDrive

side

284mm;at;

straight pull

Nipples 15mmABS,aluminum

CLEANING, MAINTENANCE AND REPLACEMENT

PARTS

Thewheelsyouhavejustpurchasedarehightechnolgy

products that require specific care and maintenance to

fully obtain the maximum performance advantages and

to preserve them over time. So we recommend to follow

simplerulesofusetoavoidanykindofproblem.

WARNING: Never clean the wheels and parts using

high pressure and high temperature water. The water

pressure can overcome seals and bearings protections

systems causing damages irreparably or malfunfion of

internal parts of the hub. Never use solvents, chemicl

products, petrol or similar substances, over the hubs

thatcan damage sealsand rubber gasketsorremove

the grease from the bearings completely.

After the bicycle washing, dry every parts and

components avoiding to store water into the hollow

points of the wheel ( for instance inside the rim and hub).

Frequently check the wear status od the wheels parts

and if necessary make the maintenance and/or parts

replacement through the official Deda Elementi dealers.

Therecommendedserviceintervalsdependontheuse

and using condition of the wheels. It is recommended

tomakeaninspectionaftereachridingseasonorevery

time in case of bearing problems, wheel out of center or

damaged parts are apparent. Since specific tools and

experience are necessary for hub maintenance, wheel

trueing or parts replacement it is recommended that the

service should be done by official Deda Elementi dealer.

For any service or replacement parts, only orginal

Deda Elementi spare parts have to be used in order

to guarantee the product quality and the warranty

maintaining.

CONTACTS

For any question or technical information please

contact Deda Elementi by visiting the website at www.

dedaelementi.com and through the email address

[email protected].

Deda Elementi s.r.l reserves the right to modify without

notice the content of this manual always guaranteeing

the avalaibility of the updated versions on the website

dowanload area.

Wheel Type Freehub Cassette Compatibility

Shimano/Sram Shimano 11v Shimano 10v + 1.80mm

spacer

Sram 10v +

1.80mm spacer

Campagnolo Campagnolo 11v Campagnolo 10v -

www.dedaelementi.com

Deda Elementi S.r.l.

ViaLeonardoDaVinci,21/23

26010CampagnolaCremasca(CR)-Italia

Tel.+390373750129

Fax+390373751105

#ridededa

www.dedaos.com.tw

DedaOS

No.8,Lane150-30,Sec.3,XitunRd.,

XitunDist.

TaichungCity407,Taiwan(R.O.C.)

tel:+886-4-24623436

fax:+886-4-24623430

DedaElementiUSA

[email protected]

Andere Handbücher für SL38C

Dieses Handbuch passt für folgende Modelle

Andere Deda Elementi Fahrrad Handbücher

Deda Elementi

Deda Elementi SL38C Bedienungsanleitung

Beliebte Fahrrad Handbücher anderer Marken

RAMBO

RAMBO R1000X2M-FF-BFD Bedienungsanleitung

Vermeiren

Vermeiren SAFARI Bedienungsanleitung

Velec

Velec A2/36V Bedienungsanleitung

Coswheel

Coswheel A-ONE Bedienungsanleitung

Betzold

Betzold 97869 Bedienungsanleitung

Cervélo

Cervélo S3 2019 Bedienungsanleitung

Tenways

Tenways AGO X Bedienungsanleitung

Festo

Festo EGSC-BS-KF Stücklistenhandbuch

Gio Electric

Gio Electric H1 Volt Bedienungsanleitung

GOGOBEST

GOGOBEST GM30 Bedienungsanleitung

DAHON

DAHON CIAO - 2009 Bedienungsanleitung

Aprimatic

Aprimatic ONDA 500 Kurzanleitung

MV Agusta

MV Agusta Lucky Explorer GRAVEL Gebrauchsanweisung

Greyp

Greyp G6 Series Bedienungsanleitung

Babboe

Babboe Carve-E Bedienungsanleitung

Huka

Huka orthros Bedienungsanleitung

Xtracycle

Xtracycle Stoker 2021 Bedienungsanleitung

APRILIA

APRILIA DORSODURO 750 ABS 2015 Bedienungsanleitung