Defender wireless IP2KCB1 Bedienungsanleitung

For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT

QUICK START GUIDE

2K (4MP) Wireless IP Camera

IP2KCB1

For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT

WHAT’S INCLUDED

WHAT YOU’LL NEED FOR SET UP & INSTALLATION

• Drill

• Phillips (#2) Screwdriver

• Ladder (if required)

• Cable Protectors (optional)

• Ethernet Cable (for rst time setup only depending on your Network setup)

NOTE: The IP 2K Camera will only work on 2.4 GHz frequency and is not

compatible with 5 GHz networks.

Wireless Wi-Fi 2K IP Camera with

pre-installed 16GB Micro SD Card

Camera Mounting

Hardware

Wireless Wi-Fi

Camera Antenna

Waterproof

Connectors

Camera Power

Supply (10ft)

Quick Start Guide

For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT

GETTING STARTED

1. Connect the antenna to the camera.

2. Power on the camera by connecting the camera cable to the adapter

IMPORTANT: Depending on your Network setup, you may need to connect

the camera to your modem/router using an Ethernet cable (not included)

the rst time you add the camera to the app. Once you establish a connec-

tion you can remove the cable and continue using your Wi-Fi connection to

view the camera.

3. Connect the camera to your modem/router using an Ethernet cable for

rst time setup (not included)

*Optional: Router

Camera Reset

Button

SD Card

Input

NOTE: To access the Reset Button and SD Card (installed), remove the cover

on the back of the camera.

For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT

MOBILE APP SET UP

1. Download the SmartSignal mobile app from your app store. Open the

app on your device.

2. Follow the on-screen instructions to create your account. Setup

requires access to text or email to receive the Verication Code.

IMPORTANT: Depending on your mobile device your on-screen keyboard

may remain on the screen – minimize your keyboard to continue.

[email protected]

For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT

CAMERA SET UP (ADD DEVICE)

1. Ensure your mobile device is connected to your Wi-Fi network (2.4 GHz)–

the camera and mobile device must be connected to the same network

for setup.

2. Once your account is activated, the Add Device screen will open.

Tap the + icon to add the camera.

3. Scan the QR Code on your camera and select Single Camera Setup.

If your Network allows, the camera will connect over Wi-Fi directly.

Follow the on-screen instruction to complete the camera setup.

NOTE: If the camera does not connect, follow the Setup Using Ethernet

Cable steps.

For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT

SETUP USING ETHERNET CABLE

1. Connect the camera to your modem/router using an Ethernet Cable

(not included) for rst time setup only.

2. Complete steps 1 & 2 from the Camera Set up (Add Device) section.

Tap Device connected to network link to continue - NOTE: DO NOT

tap Next.

3. Create an Admin Password for your Device (Camera) and Tap OK

to continue.

For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT

4. Tap to select your Wi-Fi Network from the list. NOTE: the IP 2K Camera

will only work on 2.4 GHz frequency.

5. Enter your Wi-Fi Password and tap the Save icon (top of the screen)

to continue.

6. For both setup options once the camera is connected you will see the

Add successfully screen. Tap Start Preview to open the app.

NOTE: If you used a hard wire connection to get started, once the

camera has been connected to the app, you can disconnect the

Ethernet cable and use your Wi-Fi connection.

For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT

USING THE APP (MAIN SCREEN)

1 2

3 4 5

1. Camera Information

2. Motion Detection ON (yellow)/OFF

3. Device Selection

4. Alerts Received

5. Account Information & Settings

Install your camera in the desired

location. For more setup instruction,

access our full manuals and support

videos on the product page.

GUIDE DE DÉMARRAGE RAPIDE

Caméra IP sans l 2K (4MP) - IP2KCB1

GUÍA DE INICIO RÁPIDO

Cámara IP inalámbrica de 2K (4MP) - IP2KCB1

Pour le manuel complet du produit et les vidéos de support, visitez www.DEFENDER-USA.COM/SUPPORT

CE QUI EST INCLU / QUÉ ESTÁ INCLUIDO

CE DONT VOUS AVEZ BESOIN POUR

L’INSTALLATION ET L’INSTALLATION

• Percer

• Tournevis cruciforme (n ° 2)

• Échelle (si nécessaire)

• Protecteurs de câbles (optionnel)

• Câble Ethernet (pour la première instal-

lation uniquement en fonction de votre

conguration réseau)

REMARQUE: La caméra IP 2K ne fonctionnera

que sur une fréquence de 2,4 GHz et n’est pas

compatible avec les réseaux de 5 GHz.

LO QUE NECESITARÁ PARA LA

INSTALACIÓN Y LA INSTALACIÓN

• Perforar

• Destornillador Phillips (# 2)

• Escalera (si es necesario)

• Protectores de cable (opcionales)

• Cable Ethernet (solo para la conguración

por primera vez, dependiendo de su

conguración de red)

NOTA: La cámara IP 2K solo funcionará en una

frecuencia de 2,4 GHz y no es compatible con

redes de 5 GHz.

Caméra IP Wi-Fi 2K sans l avec carte Micro

SD 16 Go préinstallée

Cámara inalámbrica Wi-Fi 2K IP con tarjeta

Micro SD de 16 GB preinstalada

Le matériel de montage

Accesorios de montaje

Antenne Caméra

Antena de camara

Connecteurs Etanches

Conectores a prueba de agua

Alimentation de la caméra (10ft)

Fuente de alimentación de la cámara

(10 pies)

Guide de démarrage rapide

Guía de inicio rápido

Andere Handbücher für IP2KCB1

Inhaltsverzeichnis

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung