Defender IIIT Bedienungsanleitung

IIIT

The Ultimate Personal Safety Alarm Product Code: AL00016

WARNING

The high output siren ﬁtted to this quality personal alarm may cause ear damage if used at

close range for a prolonged period of time. Keep away from children and pets ears. This

product is designed for use as a deterrent; it does not guarantee protection or personal safety.

Remove the screws to

replace the battery (9V)

defendersecurityproducts.co.uk

Introduction

The Defender IIIT is ﬁtted with a high intensity strobe bulb that produces a ﬂashing light when the

140dBs* alarm is activated. The Defender IIIT uses a traditional ripcord activation and has an

independent torch function.

The Defender IIIT is Sold Secure and Secured by Design, please see the following websites for

more information: www.securedbydesign.com and www.soldsecure.com

Operation

1. To operate the alarm, simply pull the ripcord pin out of the socket. To stop the alarm

sounding, replace the ripcord pin into the socket on the top of the alarm.

2. To use as a torch, simply press in the button on the side of the unit.

Keyring attachment

Attach the key ring provided to the bottom of the alarm, and then attach this to your bag strap.

Hold the ripcord or attach it to yourself with the G-Clip. If the bag is snatched, the ripcord pin is

removed which will activate the alarm and strobe lights will ﬂash to shock and deter the attacker.

The alarm will remain attached to the bag which is likely to cause the thief to drop the item to get

away from the alarm.

Mounted alarm

The alarm can be attached to a ﬁxed point such as a wall to act as a panic alarm. The easy-use

bracket can be screwed to a wall and the alarm easily slides into the bracket and can be removed

again by opening the crocodile clip on the reverse of the handle. The ripcord will be at the top of

the alarm and hang down the side of the alarm. To activate, pull the cord upwards.

Battery installation / replacement

1. Loosen the two screws on the back cover of the alarm with a small Phillips or Pozi

screwdriver to access the battery compartment.

2. Remove the old battery and insert a fresh 9V battery in the same polarity.

3. Reﬁt the back cover and tighten screws.

CAUTION

• When testing the alarm, make sure you hold it at least at arm’s length away from your ear.

• The power source or propellant has a ﬁnite / limited life.

• DO NOT MODIFY THE ALARM.

• The alarm should be kept out of reach and audible range of children and pets.

Note:

Performance may be adversely aected following prolonged exposure to extreme temperatures.

Personal safety alarm guidance

It is advised that use of an audible personal alarm should not be relied on as the sole means of

preventing an attack and should be used in conjunction with other precautionary measures. Please

note the following advice:

General use

When in your car

Before you use your alarm

Remember

Personal safety alarms are designed for use by individuals who are under threat from attack and

should be used with care and responsibility. It is intended to shock and disorientate an attacker to

provide a distraction so that the user can make an escape.

It is not intended to be used as a distress signal for attracting help and attention. However the noise

may induce fear of intervention and detection of others so this is an opportune secondary function.

DON’T FORGET AN AUDIBLE PERSONAL ALARM SHOULD NOT BE EXPECTED TO PROVIDE A

COMPLETE SAFEGUARD AGAINST ASSAULT AND USERS SHOULD ALWAYS TAKE SUITABLE

PRECAUTIONS TO REDUCE THE RISK OF ATTACK.

• Always have the alarm close to hand and ready for use.

• Plan your route / journey in advance.

• Tell someone where you are going and what time you will be back.

• Walk with conﬁdence.

• Be alert.

• Always have the alarm close to hand and ready for use.

• Always park in well lit areas.

• Have the keys ready as you approach your car.

• If another vehicle (including the police) is signalling you to stop, do not pull over in an

isolated spot, wait until you reach a safe area.

• Be alert at all times.

• Be sure you know how to activate and de-activate the alarm.

• Make regular checks on power and at the ﬁrst indication of a weak sound, replace the

battery.

• Practice appropriate means of carrying the alarm ready for use.

Defender Security Products

Unit 40

Manor Industrial Estate

Flint, Flintshire

CH6 5UY Your Safety is Our Expertise

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Defender Sicherheitssystem Handbücher

Defender

Defender PX301 Bedienungsanleitung

Defender

Defender 4K1T4B4V2 Bedienungsanleitung

Defender

Defender Phoenix 3.5" Digital Wireless Security Video... Bedienungsanleitung

Defender

Defender SN502-4CH Bedienungsanleitung

Defender

Defender PHOENIXM2 Bedienungsanleitung

Defender

Defender 4K1T4B4 Bedienungsanleitung

Defender

Defender PHOENIX Bedienungsanleitung

Defender

Defender CA6150 Bedienungsanleitung

Defender

Defender EL00147 Bedienungsanleitung

Defender

Defender 2K Bedienungsanleitung

Defender

Defender EL00194 Bedienungsanleitung

Defender

Defender PX301 Bedienungsanleitung

Defender

Defender PHOENIX1 Bedienungsanleitung

Defender

Defender EL00002 Bedienungsanleitung

Defender

Defender SENTINEL3 Bedienungsanleitung

Defender

Defender AL00005 Bedienungsanleitung

Defender

Defender MKA TORCH Bedienungsanleitung

Defender

Defender DX-500 SOLAR Bedienungsanleitung

Defender

Defender CA6000 Bedienungsanleitung

Defender

Defender AL00035 Bedienungsanleitung

Defender

Defender Cooper Torch Bedienungsanleitung

Defender

Defender AL00033 Bedienungsanleitung

Defender

Defender WHDREC Bedienungsanleitung

Defender

Defender MINIMAX AL00010 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung