Deliberant APC 2Mi Bedienungsanleitung

APC 2Mi

Quick Installation Guide

Revision 1.2

19 February 2011

deliberant Page 2

this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form by any means without the written permission of Deliberant.

Notice

Deliberant reserves the right to change specifications without prior notice.

While the information in this manual has been compiled with great care, it may not be deemed an

assurance of product characteristics. Deliberant shall be liable only to the degree specified in the

terms of sale and delivery.

The reproduction and distribution of the documentation and software supplied with this product and

the use of its contents is subject to written authorization from Deliberant.

Trademarks

Deliberant logo is trademark of Deliberant LLC.

All other registered and unregistered trademarks in this document are the sole property of their

respective owners.

Quick Installation Guide Contents

deliberant Page 3

Contents

Copyright .............................................................................................................................................2

Notice ..................................................................................................................................................2

Trademarks .........................................................................................................................................2

CONTENTS ...........................................................................................................................................3

INTRODUCTION....................................................................................................................................4

FCC Warning.......................................................................................................................................4

FCC Caution ....................................................................................................................................4

FCC Radiation Exposure Statement ...............................................................................................4

Antenna Installation .........................................................................................................................4

CE Mark Warning................................................................................................................................5

R&TTE Compliance Statement ...........................................................................................................5

Safety...............................................................................................................................................5

EU Countries Intended for Use........................................................................................................5

EU Countries Not Intended for Use .................................................................................................5

ABOUT THIS GUIDE.............................................................................................................................6

Prerequisite Skills and Knowledge......................................................................................................6

Definitions, Acronyms and Abbreviations............................................................................................6

Technical Support ...............................................................................................................................6

Contact us ...........................................................................................................................................6

INSTALLATION.....................................................................................................................................7

Package Contents...............................................................................................................................7

Hardware Introduction.........................................................................................................................7

LEDs ................................................................................................................................................8

Mounting the APC 2Mi on the Wall .....................................................................................................9

ACCESS THE APC 2MI ......................................................................................................................10

Connection via WEB Browser ...........................................................................................................10

Resettingto Factory Defaults............................................................................................................11

Resetting Device via Ping..............................................................................................................11

Quick Installation Guide Introduction

deliberant Page 4

Introduction

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

FCC Caution

To assure continued compliance, any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

FCC Radiation Exposure Statement

To comply with FCC RF exposure requirements in section 1.1307, a minimum separation

distance of 20 cm is required between the antenna and all public persons.

Quick Installation Guide Introduction

deliberant Page 5

CE Mark Warning

Class A product. In a domestic environment this product may cause radio interference in

which case the user may be required to take adequate measures.

R&TTE Compliance Statement

This equipment complies with all the requirements of the Directive 1999/5/EC of the European

Parliament and the Council of 9 March 1999 on Radio Equipment and Telecommunication Terminal

Equipment and the Mutual Recognition of their Conformity (R&TTE).

The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal

Equipment and Satellite Earth Station Equipment) As of April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it.

However, special attention must be paid to the dangers of electric shock and static electricity when

working with electrical equipment. All guidelines of this manual and of the computer manufacturer

must therefore be allowed at all times to ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark,

Finland, France (with Frequency channel restrictions), Germany, Greece, Ireland, Italy, Luxembourg,

The Netherlands, Portugal, Spain, Sweden and United Kingdom.

The ETSI version of this device is also authorized for use in EFTA member states Iceland,

Liechtenstein, Norway and Switzerland.

EU Countries Not Intended for Use

None

product. In a domestic environment this product may cause radio interference in

In a domestic environment this product may cause radio interference in

Quick Installation Guide About this Guide

deliberant Page 6

About this Guide

Prerequisite Skills and Knowledge

To use this document effectively, you should have a working knowledge of Local Area Networking

(LAN) concepts and wireless Internet access infrastructures.

Definitions, Acronyms and Abbreviations

The following typographic conventions and symbols are used throughout this document:

Additional information that may be helpful but which is not required.

Important information that should be observed.

bold

Menu commands, buttons, input fields, links, and configuration keys are displayed in bold

italic

References to sections inside the document are displayed in italic.

code

File names, directory names, form names, system-generated output, and user typed

entries are displayed in constant-width type

Technical Support

If you encounter problems when installing or using this product, please consult the Deliberant website

at www.deliberant.com for:

Direct contact to the Deliberant support centers.

Frequently Asked Questions (FAQ).

Download area for the latest software, user documentation and product updates.

EU office:

UAB WILIBOX Veiveriu 150 - IIIa. Kaunas,

LT-46391

Lithuania

[email protected]

US office:

Deliberant

138 Mountain Brook Drive

Canton, GA 30115

United States of America

For support: supp[email protected]

For sales enquiries: sales@deliberant.com

Quick Installation Guide Installation

deliberant Page 7

Installation

This chapter provides installation instructions for the hardware components of the APC 2Mi.

Package Contents

The figure below displays APC 2Mi package contents.

Figure 1 –APC 2Mi Package Contents

Item

Component Name

Quantity

APC 2Mi Quick Installation Guide

APC 2Mi enclosure

Omni antenna

PoE injector

Power adapter

If any of these items are missing or damaged, please contact your reseller.

Hardware Introduction

APC 2Mi is housed in a rugged metal enclosure and has two omni antennas:

Figure 2 –APC 2Mi Overview

The APC 2Mi contains:

Power connector

Ethernet port

Reset button enables to reboot and reset the device configuration to the factory defaults.

6 LEDs: power LED, LAN activity LED and 4 LEDs for device RSSI level indication

2 omni antennas

Quick Installation Guide Installation

deliberant Page 8

The APC 2Mi has label with following information:

Figure 3 –APC 2Mi Label

The label of the APC 2Mi contains:

Model name. The official model name is APC 2Mi.

Serial Number

Radio MAC address

LAN MAC address

FCC ID: UB8-APC2Mi

IC ID: 6607-APC2Mi

LEDs

The APC 2Mi has 6 LEDs located on the side panel: power, LAN and 4 RSSI LEDs (refer at the

Figure 2 –APC 2Mi Overview for details). The various states of the LEDs indicate different connection

operations as follows:

LED

Color

Status Indication

Power

Green

On APC 2Mi is active/working

Off No power on APC 2Mi

LAN

Green

On LAN connection exists.

Blinking

Indicates the traffic on LAN interface.

Off

No LAN connection.

RSSI (1, 2, 3, 4)

Yellow

The RSSI level has reached the appropriate threshold

level (default RSSI threshold levels: 10, 25, 35, 50)

Off

The RSSI level has not reached the appropriate

threshold level

Quick Installation Guide Installation

deliberant Page 9

Mounting the APC 2Mi on the Wall

The indoor unit APC 2Mi unit can be mounted on a wall easy. Follow the steps for APC 2Mi

installation on a wall:

Step 1. Attach the unit by a two screws on a wall and push it downwards until it clicks into

position:

Step 2. Connect omni antennas (item C in the Figure 1 –APC 2Mi Package Contents),

Ethernet cable and power adapter (item D and E in the Figure 1 –APC 2Mi Package

Contents), to the APC 2Mi:

Step 3. After the power adapter was connected to the APC 2Mi, the green power LED and LAN

LED must be on (refer at the respective section LEDs). Dependently on link quality, up

to four yellow LEDs will switch on indicating that the link between two units was

established successfully.

Step 4. After the link between two devices was established, align antennas for the maximal

performance. Run the Antenna Alignment tool in the Web management interface and

move omni antennas in the horizontal and vertical planes until the maximum RSSI

visible on the Antenna Alignment graph is achieved.

Quick Installation Guide Access the APC 2Mi

deliberant Page 10

Access the APC 2Mi

The first connection to the APC 2Mi can be made using a standard Ethernet cable connected directly

to your PC. See next sections for the instructions on how to access the APC 2Mi management

interfaces.

Connection via WEB Browser

The default IP address of the APC 2Mi is 192.168.2.66 with a subnet mask of 255.255.255.0.

Step 1. Configure your PC with a static IP address on the 192.168.2.0 subnet with mask

255.255.255.0. Connect the APC 2Mi Ethernet interface in to the same physical

network as your PC. Open the Web browser and type the default IP address of the

APC 2Mi: https://192.168.2.66/

Step 2. Enter the APC 2Mi administrator login details to access the Web management:

The default administrator login settings for all APC 2Mi are:

Password: admin01

Step 3. After successful administrator log on you will see the main page of the APC 2Mi Web

management interface. The APC 2Mi now is ready for configuration. For further

instructions on Web management refer to the respective document APC 2Mi User

Guide.

Inhaltsverzeichnis

Andere Deliberant Drahtloser Zugangspunkt Handbücher

Deliberant

Deliberant APC Propeller 2 Bedienungsanleitung

Deliberant

Deliberant APC 5M-18 V2 Bedienungsanleitung

Deliberant

Deliberant FWBD0501 Bedienungsanleitung

Deliberant

Deliberant APC Montageanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung