Dell EMC SD-WAN Edge 600 Series Bedienungsanleitung

Dell EMC SD-WAN Edge 600 Series

Setup Guide

August 2019

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of

your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of

data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury,

or death.

trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective

owners.

2019 - 08

Rev. A00

Contents

1 Edge 600 Series..............................................................................4

Installation instructions ........................................................................... 4

Specications............................................................................................7

Contents 3

Edge 600 Series

The Dell EMC SD-WAN Edge 600 Series (610, 620, 640, and 680) is a purpose-built, high-

value uCPE platform to host virtual networking functions (VNFs).

For detailed installation information, including instructions for the wall mount and optional

dual rackmount tray installation, see the Dell EMC SD-WAN Edge 600 Series Installation

Guide at www.dell.com/support.

After unpacking the Edge 600 Series, inspect the device and immediately report any

damage to your Dell EMC sales representative.

Topics:

• Installation instructions

•Specications

Installation instructions

Information icon denitions:

• The Warning icon signals information about hardware handling that could result in injury.

• The Caution icon signals information about situations that could result in equipment

damage or lost of data.

• The Note icon signals important operational information.

Install the device

WARNING: To avoid electrostatic discharge (ESD) damage, wear grounding wrist

straps when handling this equipment.

WARNING: This device has optical transceivers, which comply with the limits of

Class 1 laser radiation. When working with optical bers, follow all warning labels

and always wear eye protection.

4 Edge 600 Series

WARNING: When no cable is connected, visible and invisible laser radiation may be

emitted from the aperture of the optical transceiver ports. Avoid exposure to laser

radiation and do not stare into open apertures.

Install the device in an area that meets the following safety requirements:

• Near a properly grounded AC power outlet.

• In a temperature-controlled room with a continuous temperature range from 0°C to

40°C (32°F to 104°F)

• In a dry, clean, and well-ventilated room away from heat sources such as hot air vents or

direct sunlight

• Away from severe electromagnetic noise

• Away from direct view within the workplace

The numbers one through four in the following gure correspond to the setup procedure:

1 Connect the power adapter to the AC power outlet. Connect the other end of the

power adapter to the power port on the Edge. When the Edge powers ON, verify that

the status LED on the front of the Edge is on.

NOTE: Connect the device to a properly wired earth-ground AC power

outlet.

2 Connect one of the default WAN ports (GE3-6 or SFP1-2) to an available Internet

connection. SFP modules are not included.

Edge 600 Series 5

a 1—SFP 1-2 b 2—GE 3-6

NOTE: By default, the Edge gets a DHCP IP address from the ISP on the

WAN uplink. When the WAN connection is fully operational, the cloud LED

on the front of the Edge is green.

3 If you received an email from your IT administrator, follow the instructions in the email

to complete the Edge activation.

If you did not receive an email, request the setup instructions from your IT

administrator or nd more information at the Dell EMC support site at www.dell.com/

support.

4 Connect local devices such as computers and switches to the GE1 or GE2 ports, or

through the Edge WiFi.

• GE1 or GE2 ports

6Edge 600 Series

After following these instructions, if you are still unable to activate the Edge, contact your IT

administrator or open a Dell EMC support request.

Specications

Table 1. Edge 600 Series specications

Feature Specication

Size 8.1 in x 7.9 in x 2.0 in (W x D x H)

20.8 cm x 20.0 cm x 5.20 cm (W x D x H)

Weight, depending on the product

NOTE: Platform weight does not

include power adapter weight.

2.87 lb to 3.11 lb

1.30 Kg to 1.41 Kg

AC power input 100 VAC–240 VAC, 50/60 Hz

AC maximum current draw per system 100 VAC: 2.0 A

240 VAC: 1.0 A

Typical power consumption 16 core: 40 W

8 core: 35 W

4 core: 20 W

2 core: 16 W

Maximum power consumption 16 core: 50 W

8 core: 45 W

4 core: 30 W

2 core: 26 W

RoHS information Go to: Restricted Material Compliance.

Edge 600 Series 7

Table 2. Edge 600 Series temperatures

Feature Specication

Operating temperature 0°C to 40°C (32°F to 104°F)

Storage temperature –40°C to 70°C (-40°F to 158°F)

Operating relative humidity 5% to 85% (RH), non-condensing

continuously

5% to 90% (RH), non-condensing short

term (< 1% of operational hour per year)

Storage relative humidity 5% to 90% (RH)

Operating altitude Maximum: 10,000 feet (3,048 meters)

No performance degradation up to 3,117 feet

(950 meters)

8 Edge 600 Series

Andere Handbücher für SD-WAN Edge 600 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dell EMC Netzwerk-Hardware Handbücher

Dell EMC

Dell EMC VEP4600 Bedienungsanleitung

Dell EMC

Dell EMC Virtual Edge Platform 1405 Series Bedienungsanleitung

Dell EMC

Dell EMC ECS EX Series Montageanleitung

Dell EMC

Dell EMC SD-WAN Edge 600 Series Bedienungsanleitung

Dell EMC

Dell EMC VxRail P series Kurzanleitung

Dell EMC

Dell EMC NX440 Gebrauchsanweisung

Dell EMC

Dell EMC PowerEdge MX5016s Handbuch

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Dell EMC

Dell EMC Virtual Edge Platform 1405 Series Benutzerhandbuch

Dell EMC

Dell EMC Storage NX3230 Bedienungsanleitung

Dell EMC

Dell EMC PowerFlex Appliance Bedienungsanleitung

Dell EMC

Dell EMC VxRail P series Bedienungsanleitung

Dell EMC

Dell EMC VEP4600 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung

Cantek

Cantek NR310-4 Bedienungsanleitung