Dell OptiPlex VDI Blaster Edition Bedienungsanleitung
Dell OptiPlex
FX130 and FX170
Re-Imaging Guide
Notes, Cautions, and Warnings
NOTE:
A NOTE indicates important informationthat helps you make betteruseof your
thinclient.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data
if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
______________
Information in this publication is subject to change without notice.
© 2011 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission
of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell™, the DELL logo, and OptiPlex™ are trademarks of
Dell Inc. Devon IT, the Devon IT logo, Devon IT Echo™ Thin Client Management
Software, and VDI Blaster™ are registered trademarks of Devon IT Inc. in the U.S. and
other countries. Microsoft®, Windows®, Windows Server®, MS-DOS® and Windows
Vista® are either trademarks or registered trademarks of Microsoft® Corporation in the
United States and/or other countries. Citrix®, Xen®, XenServer®, XenDesktop™, ICA™,
and XenMotion® are either registered trademarks or trademarks of Citrix Systems, Inc. in
the United States and/or other countries. VMware®, VMware View™, View Client
™,Virtual SMP®, vMotion®, vCenter®, and vSphere® are registered trademarks or
trademarks of VMware, Inc. in the United States or other countries.
Other trademarks and trade names may be used in this publication to refer to either the
entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
August 2011 Rev. A01
Contents | 3
Contents
How to Write Disk Images to Dell OptiPlex FX130 and
FX170Thin Clients..........................................................................4
Step 1: Creating the Re-Imaging Utility on a USB Flash Drive or
CD/DVD....................................................................................................4
Step 2: Retrieving the Disk Images...........................................................5
Step 3: Using the Re-Imaging Utility to Write the Disk Image to the
Thin Client................................................................................................6
Final Steps .............................................................................................12
Using the Re-Imaging Utility to Clone the Disk Images...........................12
Updating the Re-Imaging Utility to Update a BIOS on the Thin Client.....13
Other Uses of the Re-Imaging Utility ......................................................15
Getting Help..................................................................................18
Contacting Dell.......................................................................................18
Dell OptiPlex FX130 and FX170 Re-Imaging Guide | 4
How to Write Disk Images to
Dell OptiPlex FX130 and FX170
Thin Clients
This document describes how to create a re-imaged utility on a USB Flash
drive or CD/DVD and use it to write a disk image to your Dell OptiPlex
FX130 and FX170 thin clients.
The following hardware is required:
Windows or Linux system with access to the Internet
USB Flash drive with at least 2 GB of storage
Dell OptiPlex FX130 or FX170 thin client
Step 1: Creating the Re-Imaging Utility on a
USB Flash Drive or CD/DVD
The re-imaging utility is distributed as an ISO image. This ISO can be
used to create a bootable CD or USB key using third-party media
creation tools. After downloading the ISO, follow the instructions for
your media creation tool.
To download the Devon IT Re-Imaging Utility Dell Edition ISO, visit
support.dell.com
and navigate to the OptiPlex FX130 or FX170 pages.
NOTE:
The same Devon IT Re-Imaging Utility Dell Editiontool is used to download
Devon IT (DeTOS) Dell Edition, (WES2009), orWES7Operating Systems.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide | 5
Step 2: Retrieving the Disk Images
Visit
support.dell.com
to locate and download the latest operating
system image to re-image your OptiPlex FX130 or FX170 thin clients.
The OS disk images can be found on the product support pages.
The IT Re-Imaging Utility offers three ways to write the disk image. The
first option is to copy the disk image to a USB Flash drive or a
rewriteable CD/DVD. You can copy at least one disk image on your
flash drive if its capacity is at least 2 GB. The other two options involve
copying the disk image to an NFS or Windows share on your local area
network.
Option A: Saving the Disk Image(s) Locally to the USB Flash
Drive or a CD/DVD
To save the disk image to your Re-Imaging Utility drive:
1
Create a folder at the root of the USB drive called
Images
.
2
Copy the disk image(s) into that directory.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide | 6
Option B: Storing the Disk Image(s) on a Network Share
Copy the disk image(s) to a Windows shared drive or NFS mounted
directory. The screenshot below shows an example of how to copy a disk
image to a Windows network drive called WES images.
Step 3: Using the Re-Imaging Utility to
Write the Disk Image to the Thin Client
Plug the USB key or a CD/DVD drive with Re-Imaging Utility into the thin
client. To run the Re-Imaging Utility, you must ensure that your thin client is
set to boot from the USB flash drive or CD/DVD drive instead of the
internal drive.
To re-image the OptiPlex 130 and OptiPlex 170 using a USB flash drive:
1
Press <F12> during bootup to access the system boot menu.
2
Select the option named
Hard Disk
(or the name of your flash
drive) and press <Enter>.
3
Select the second option called
USB-HDD0
and press <Enter>.
You will see a menu with an option called
Default
selected.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide | 7
4
Press <Enter> or wait 10 seconds to continue. A splash screen will
appear and a blue progress bar will display as the re-imaging utility
begins to load.
After the bootup is complete the Devon IT Re-Imaging Utility Dell Edition
Main Menu
is displayed.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide | 8
Use the arrow keys to select an option that corresponds to the way you saved
your disk image.
If you copied your disk image directly to the USB flash drive or
CD/DVD itself, then select <1> and press <Enter>.
If you copied your disk image to an NFS mounted directory, then
select <2> and press <Enter>.
If you copied your disk image to Windows Network drive, then
select <3> and press <Enter>.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide | 9
Specific Instructions for Option 1: Writing the local image from
USB
1
A list of available disk images found on the local USB drive or
CD/DVD is displayed. Select the appropriate disk image file for
the thin client you are re-imaging.
2
Press <Enter> to flash the terminal with the selected image.
3
The message
Writing image to disk
is displayed, along
with a progress bar showing the current status of the reimaging
process. Do not turn off your thin client at this time.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide | 10
Specific Instructions for Options 2 and 3 –Writing the Image
from an NFS Mount or Windows Server
1
Enter the base location of the network share and press <Enter>.
For example, if you store your disk image on a Windows network
drive named
images
located on a server with an IP address of
10.0.5.12
,
then type:
//10.0.5.12/images.
2
Enter a valid username and press <Enter>.
3
Enter the password for this user. Press <Enter> to continue.
4
If you use a Windows Share, then you are prompted to enter the
domain name.
5
Once a connection has been established, a list of available disk
images found on the network drive is displayed.
Andere Handbücher für OptiPlex VDI Blaster Edition
2
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Dell Desktop Handbücher
Dell
Dell OptiPlex 380 Bedienungsanleitung
Dell
Dell Inspiron 24 5000 Series Bedienungsanleitung
Dell
Dell OPTIPLEX 9010 ALL-IN-ONE Betriebsanleitung
Dell
Dell INSPIRON Inspiron 1100 Bedienungsanleitung
Dell
Dell Precision 5820 Tower Bedienungsanleitung
Dell
Dell OptiPlex XE2 Small Form Factor Bedienungsanleitung
Dell
Dell Dimension 8400 Series Bedienungsanleitung
Dell
Dell GX240 - OptiPlex Pentium 4 1.8GHz 512MB 40GB CD... Bedienungsanleitung
Dell
Dell Inspiron 5720 Bedienungsanleitung
Dell
Dell Precision R7610 Bedienungsanleitung
Dell
Dell Inspiron 530 Series Technisches Handbuch
Dell
Dell Precision Workstation 380 Bedienungsanleitung
Dell
Dell Networking 8100 Series Bedienungsanleitung
Dell
Dell Latitude 7490 Bedienungsanleitung
Dell
Dell Precision 7770 Bedienungsanleitung
Dell
Dell Dimension YH242 Bedienungsanleitung
Dell
Dell 320N Bedienungsanleitung
Dell
Dell Vostro 20-3052 Bedienungsanleitung
Dell
Dell Precision T7400 DCDO Bedienungsanleitung
Dell
Dell PowerEdge 850 Technisches Handbuch
