Dell Wyse 3040 Thin Client Bedienungsanleitung

Dell Wyse 3040 Thin Client

User Guide

Regulatory Model: N10D

Regulatory Type: N10D001

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

trademarks may be trademarks of their respective owners.

2017 - 03

Rev. A00

Welcome to Dell Wyse 3040 thin client

Dell Wyse 3040 thin client is a low-cost entry level thin client platform. These thin clients have a x86 processor, which allows you to

run Wyse ThinOS, PCoIP enabled Wyse ThinOS, and Wyse ThinLinux. The platform is used as a thin client by connecting to any

monitor and allows you to use a remote access client for VDI or cloud-based computing.

About this guide

This guide is intended for Wyse 3040 thin clients which run Wyse ThinOS, PCoIP enabled Wyse ThinOS, and Wyse ThinLinux. It

provides hardware specications and OS-specic congurations to help you work with Wyse 3040 thin clients.

Dell Wyse external references

This section provides links to technology related support and self-service sites for Dell Wyse thin clients.

•Dell reference guides

•Dell Service and Support — Latest software images

•Dell Wyse Device Manager — Information about Dell remote management software

•Dell and the Environment — Information about Dell compliance with RoHS and with the Waste Electrical and Electronic

Equipment (WEEE)

•Dell and e-Recycling — Information about recycling and reuse of Dell products

•Dell Warranty Registration* — Register your product

Wyse 3040 thin client hardware installation

For more information on the hardware installation, see

Dell Wyse 3040 thin client Quick Start Guide

Wyse 3040 thin client on ThinOS

This section provides the instructions on how to easily congure and eciently manage Wyse 3040 thin client that runs on ThinOS.

Logging on to the Wyse 3040 thin client running Wyse ThinOS

What you see after logging on to the server depends on the administrator congurations.

•Users with a Classic Desktop - will see the classic ThinOS desktop with full taskbar, desktop, and Connect Manager familiar to

ThinOS users. This option is the default out-of-the-box experience and is recommended for terminal server environments with

published applications and for backward compatibility with ThinOS 6.x versions.

•Users with a Zero Desktop - will see the Zero Desktop with the Zero Toolbar showing the assigned list of connections from

which to select. This option is recommended for VDI and any full-screen only connections.

In any desktop case, you can select the desktop option you want (Classic Desktop or Zero Desktop) and create the connections you

need using the Visual Experience tab on the Remote Connections dialog box.

To open the Remote Connections dialog box, perform one of the following tasks:

•Classic Desktop — Click User Name , and then select System Setup → Remote Connections.

NOTE: User Name is the user who is logged-on and is located at the lower-left pane of the taskbar

•Zero Desktop — Click the System Settings icon on the Zero Toolbar, and then select Remote Connections.

Conguring the dual head display settings on Wyse ThinOS

To congure the dual head display settings:

1. From the desktop menu, click System Setup, and then click Display.

The Display dialog box is displayed.

2. Click Dual Head tab, and use the following guidelines:

This feature is applicable for supported dual monitor capable thin clients only.

a. Dual Head—Select Mirror Mode to have the two monitors work in a matching state, or Span Mode to have the two

monitors work separately second is extended from rst.

b. Main Screen—Select which of the two monitors you want to be the main screen (Screen1 or Screen2). The other screen

is extended from the main screen.

c. Layout—Select how you want the two monitors to be oriented to each other.

Horizontal — where you move between the monitors from the left and right of the screens.

Vertical— where you move between the monitors from the top and bottom of the screens.

d. Alignment— Select how you want the monitors to be aligned Bottom, Center, or Top.

Bottom means screens are bottom-aligned in a horizontal orientation; Center means screens are center-aligned; Top means

screens are top-aligned in a horizontal orientation.

e. Taskbar (Classic Desktop Only)—Select under which screen you want the taskbar to appear Whole Screen or Main

Screen

Gamma Supported Monitors Only— Use the Gamma Setup tab to adjust the saturation values for Red, Green and Blue on

VGA connected monitors supporting gamma settings, if you feel the default settings are too light. Be aware that the Gamma

Setup tab will be disabled once you click Save+Exit. You can enable it again by setting rgamma={1-100} ggamma={1-100}

bgamma={1-100} in the Resolution INI parameter. For more information, see Dell Wyse ThinOS INI Guide.

For Swap dual screens, when you set Main Screen to Screen2, an additional check box is displayed at the bottom of the tab

that allows you to swap dual screens. If you clear the check box, the Screen1 is usually the left one or the top one in dual

display. When you set Main Screen to Screen2, the main screen is changed to the right screen or bottom screen. If you

select the Swap dual screens check box, you are able to set Main Screen to Screen2, but still have it at the left side or the

top side, which is considered more user friendly.

Conguring the network settings on Wyse ThinOS

To congure the network settings use the following options:

•Conguring the general settings.

•Conguring the DHCP options settings.

•Conguring the ENET settings.

•Conguring the WLAN settings.

Conguring the General settings

To congure the general network settings:

1. From the desktop menu, click System Setup, and then click Network Setup.

The Network Setup dialog box is displayed.

2. Click the General tab, and use the following guidelines:

a. To set the default gateway, select the type of network interface from the available options.

1. Single Network support — Either wireless or wired network is connected.

•ENET — Click this option, if you want set up the Ethernet Wired Network Connection.

•WLAN — Click this option, if you want to set up the Wireless Network Connection.

• If you use wireless network after selecting ENET connection or wired network after selecting WLAN connection,

then the system log "WLAN: set default gate way xxx.xxx.xxx.xxx" for rst case and "ENET: set default gate way

xxx.xxx.xxx.xxx" for second case are printed to ensure that the UI setting reects the actual usage.

NOTE: The User Interface (UI) will not be changed automatically.

2. Dual Network support — Both wireless and wired networks are connected. The default gateway is determined by the

UI settings.

b. Enter the URL address of the DNS domain in the DNS Domain box.

c. Enter the IP address of the DNS server in the DNS Server box.

Use of DNS is optional. DNS allows you to specify remote systems by their host names rather than IP addresses. If a

specic IP address (instead of a name) is entered for a connection, it is used to make the connection. Enter the DNS

domain and the network address of an available DNS server. The function of the DNS domain entry is to provide a default

sux to be used in name resolution. The values for these two boxes may be supplied by a DHCP server. If the DHCP server

supplies these values, they replace any locally congured values. If the DHCP server does not supply these values, the

locally congured values will be used.

NOTE: You can enter up to 16 DNS server addresses, separated by a semicolon, comma, or space. The rst

address is for the primary DNS server and the rest are secondary DNS servers or backup DNS servers .

d. Enter the IP address of the WINS server in the WINS Server box.

Use of WINS is optional. Enter the network address of an available WINS name server. WINS allows you to specify remote

systems by their host names rather than IP addresses. If a specic IP address (instead of a name) is entered for a

connection, it is used to make the connection. These entries can be supplied through DHCP, if DHCP is used. DNS and

WINS provide essentially the same function, name resolution. If both DNS and WINS are available, the thin client attempts

to resolve the name using DNS rst and then WINS.

You can enter two WINS server addresses (primary and secondary), separated by a semicolon, comma, or space.

e. Enter the digit multiplier of 30 seconds in the TCP Timeout box to set the time-out value of a TCP connection. The value

must be 1 or 2 which means the connection time-out value is from 1x30= 30 seconds to 2x30= 60 seconds. If the data for

connecting to the server is not acknowledged and the connection is timed out, setting the time-out period retransmits the

sent data and again tries to connect to the server till the connection is established.

3. Click OK to save the settings.

Conguring the DHCP Options Settings

To congure the options settings:

1. From the desktop menu, click System Setup, and then click Network Setup.

The Network Setup dialog box is displayed.

2. Click the Options tab, and use the following guidelines:

a. DHCP Option IDs — Enter the supported DHCP options. Each value can only be used once and must be between 128 and

254.

b. Interpret DHCP Vendor-Specic Info — Select this check box for automatic interpretation of the vendor information.

c. DHCP Vendor ID — Shows the DHCP Vendor ID when the dynamically allocated over DHCP/BOOTP option is selected.

d. DHCP UserClass ID — Shows the DHCP UserClass ID when the dynamically allocated over DHCP/BOOTP option is

selected.

3. Click OK to save the settings.

Conguring the ENET Settings

To congure the ENET settings:

1. From the desktop menu, click System Setup, and then click Network Setup.

The Network Setup dialog box is displayed.

2. Click the ENET tab, and use the following guidelines:

Inhaltsverzeichnis

Andere Dell Desktop Handbücher

Dell

Dell Inspiron 3650 Bedienungsanleitung

Dell

Dell Dimension L c Series Bedienungsanleitung

Dell

Dell OPTI PLEX GX1 Bedienungsanleitung

Dell

Dell Dimension 0F0272A01 Bedienungsanleitung

Dell

Dell Precision Workstation 470 Bedienungsanleitung

Dell

Dell D31M Bedienungsanleitung

Dell

Dell Vostro 270 Betriebsanleitung

Dell

Dell Latitude 7480 Bedienungsanleitung

Dell

Dell OptiPlex 390 Bedienungsanleitung

Dell

Dell Dimension L Series Bedienungsanleitung

Dell

Dell ChengMing 3991 Bedienungsanleitung

Dell

Dell OptiPlex 5060 Small Form Factor Benutzerhandbuch

Dell

Dell Inspiron 530sa Bedienungsanleitung

Dell

Dell OptiPlex 7450 Bedienungsanleitung

Dell

Dell Vostro 230s Bedienungsanleitung

Dell

Dell OptiPlex XE2 Bedienungsanleitung

Dell

Dell OptiPlex 7080 Tower Bedienungsanleitung

Dell

Dell Precision 3930 Rack Bedienungs- und Wartungshandbuch

Dell

Dell Precision 10JEJ Bedienungsanleitung

Dell

Dell Dimension 2300C Bedienungsanleitung

Dell

Dell W29C Bedienungsanleitung

Dell

Dell OptiPlex 160 Bedienungsanleitung

Dell

Dell Precision 650N Bedienungsanleitung

Dell

Dell Dimension Lxxxc Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Compaq

Compaq iPAQ Internet Device Bedienungsanleitung

Parker

Parker PA Series Bedienungsanleitung

Lenovo

Lenovo IdeaCentre A540-24ICB Betriebsanleitung