Dell E5500 - Latitude - Core 2 Duo 2.53 GHz Bedienungsanleitung

Dell™Latitude™E5400andE5500ServiceManual



Notes, Notices, and Cautions

IfyoupurchasedaDELL™nSeriescomputer,anyreferencesinthisdocumenttoMicrosoft®Windows®operating systems are not applicable.

Information in this document is subject to change without notice.

©2008DellInc.Allrightsreserved.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, Latitude, ExpressCharge, and the DELL logo are trademarks of Dell Inc.; Bluetooth is a registered trademark owned by Bluetooth SIG, Inc., and is

used by Dell under license; Intel and Celeron are registered trademarks, and Core is a trademark of Intel Corporation in the U.S. and other countries; Blu-ray Disc is a trademark of

the Blu-ray Disc Association; Microsoft, Windows,WindowsVista,and Windows Vista start button logo are either trademarks or registered trademarks of Microsoft Corporation in the

United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any

proprietary interest in trademarks and trade names other than its own.

Models PP32LA and PP32LB

May2008Rev.A00

Troubleshooting

Keyboard

Working on Your Computer

LED Dashboard

Bottom of the Base Assembly

Display

Hard Drive

Optical Drive

Wireless Local Area Network (WLAN) Card

Palm Rest

Modem Card

System Board Assembly

Fan

I/O Card

Processor Heat Sink

Speaker Assembly

Processor Module

Coin-Cell Battery

Memory

Flashing the BIOS

Hinge Cover

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates potential for property damage, personal injury, or death.

Back to Contents Page

Bottom of the Base Assembly

Dell™Latitude™E5400andE5500ServiceManual

Removing the E5400 Bottom of the Base Assembly

Replacing the E5400 Bottom of the Base Assembly

Removing the E5500 Bottom of the Base Assembly

Replacing the E5500 Bottom of the Base Assembly

Removing the E5400 Bottom of the Base Assembly



1. Follow the procedures in Before Working on Your Computer.



2. Close the display and turn the computer upside down.



3. Loosen the five captive screws securing the bottom of the base assembly.



4. Pry up on the recess near the slender edge where indicated and slide the bottom of the base assembly toward the left side of the computer, and lift it

up.

Replacing the E5400 Bottom of the Base Assembly



CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional

safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

E5400 bottom of the base assembly

captive screws (5)

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional

safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTE: This procedure assumes that you have completed the removal procedure first.



1. Slide in the bottom of the base assembly to the left of the computer, hold it down, and snap it into place.



2. Tighten the captive screws, making sure the bottom of the base assembly is snapped down.



3. Follow the procedures in After Working on Your Computer.

Removing the E5500 Bottom of the Base Assembly



1. Follow the procedures in Before Working on Your Computer.



2. Close the display and turn the computer upside down.



3. Remove the single M2.5 x 8-mm screw securing the bottom of the base assembly.



4. Slide the bottom of the base assembly toward the front of the computer, and lift it up.

Replacing the E5500 Bottom of the Base Assembly



1. Slide the bottom of the base assembly toward the back of the computer until it is fully seated.



2. Replace the single M2.5 x 8-mm screw securing the bottom of the base assembly.



3. Follow the procedures in After Working on Your Computer.

Back to Contents Page



CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional

safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

E5500 bottom of the base assembly

M2.5 x 8-mm screw

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional

safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTE: This procedure assumes that you have completed the removal procedure first.

Back to Contents Page

Working on Your Computer

Dell™Latitude™E5400andE5500ServiceManual

Recommended Tools

Before Working on Your Computer

After Working on Your Computer

This document provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that:

lYou have performed the steps in Before Working on Your Computer.

lYou have read the safety information that shipped with your computer.

lWhen replacing a component, you have already removed the original, if installed.

Recommended Tools

The procedures in this document may require the following tools:

lSmall flat-blade screwdriver

lPhillips screwdriver

lSmall plastic scribe

lFlash BIOS update (see the Dell Support website at support.dell.com)

Before Working on Your Computer

Use the following safety guidelines to help protect your computer from potential damage and to help ensure your own personal safety.



1. Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.



2. Shut down your computer.

lIn Microsoft®Windows®XP, click Start®Shutdown®Shutdown.

lIn Microsoft Windows Vista®, click Start , click the arrow icon, and then click Shut Down to turn off your computer.



3. Disconnect your computer and all attached devices from their electrical outlets.



4. Disconnect any telephone or network cables from the computer.



5. Disconnect any external devices and remove any installed cards before working on your computer:

lTo remove any installed cards, such as an ExpressCard, see the Dell™TechnologyGuide on your computer or at support.dell.com.

NOTE: The color of your computer and certain components may appear differently than shown in this document.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional

safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not

covered by your warranty.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such

as a connector on the back of the computer.

NOTICE: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal

mounting bracket. Hold a component such as a processor by its edges, not by its pins.

NOTICE: When disconnecting a cable, pull on the cable's connector or on its strain-relief loop, not on the cable itself. For cable connectors with locking

tabs, press inward on the locking tabs to release the connector. When connecting a cable, ensure that the connectors are correctly oriented and

aligned to avoid damage to the connector and/or the connector's pins.

NOTE: Ensure that the computer is off and not in a power management mode. If you cannot shut down the computer using the operating system,

press and hold the power button for 4 seconds.

NOTICE: To disconnect a network cable, first unplug the cable from your computer, and then unplug it from the network wall jack.

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you service the computer.

lTo undock from a docking station, see the E-Port User's Guide or the E-Port Plus User's Guide on support.dell.com.

lTo remove a battery slice, see the setup guide that shipped with your battery slice or on support.dell.com.



6. Turn the computer upside down.



7. Slide the battery latch release to the right (open position). You may need to hold the latch release in the open position while removing the battery.



8. Slide the battery out of the battery bay.



9. Turn the computer top-side up, open the display, and press the power button to ground the system board.

After Working on Your Computer



1. Connect any external devices, such as a port replicator, battery slice, or cool slice, and replace any cards, such as an ExpressCard or SD memory card.



2. Connect any telephone or network cables to your computer.



3. Replace the battery. Slide the battery into the battery bay until it clicks into place.



4. Connect your computer and all attached devices to their electrical outlets.



5. Turn on your computer.

Back to Contents Page



battery latch release

battery

NOTICE: After you have completed the replacement procedures, ensure you connect the external devices, cards, cables, etc. before turning on your

computer.

NOTICE: Toavoiddamagetothecomputer,useonlythebatterydesignedforthisparticularDell™computer.Donotusebatteriesdesignedforother

Dell computers.

Back to Contents Page

Flashing the BIOS

Dell™Latitude™E5400andE5500ServiceManual

Flashing the BIOS From a CD

Flashing the BIOS From the Hard Drive

If a BIOS-update program media, such as a CD, is provided with a new system board, flash the BIOS from the media. If you do not have a BIOS-update

program media, see Flashing the BIOS From the Hard Drive.

Flashing the BIOS From a CD



1. Ensure that the AC adapter is connected to an electrical outlet and that the main battery is installed properly.



2. Start your computer.



3. Press the eject button at the front of the optical drive to open the drive tray.



4. Place the BIOS-update CD in the center of the drive tray, then gently push to close the tray.



5. Restart the computer.



6. When the DELL logo appears, press <F12> immediately.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft®Windows®desktop, then shut down your

computer and try again.



7. At the Boot Device Menu, use the up-and down-arrow keys or press the appropriate number on the keyboard to highlight CD-ROM, and then press

<Enter>.



8. Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the flash update is complete, the

computer automatically reboots.



9. Remove the flash BIOS update program CD from the drive.

Flashing the BIOS From the Hard Drive



1. Ensure that the AC adapter is connected to an electrical outlet, that the main battery is properly installed, and that a network cable is attached.



2. Start the computer.



3. Locate the latest BIOS update file for your computer at support.dell.com.



4. Click Download Now to download the file.



5. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.



6. In the File Download window, click Save this program to disk, and then click OK.



7. In the Save In window, click the down arrow to view the Save In menu, select Desktop, and then click Save.

NOTICE: Connect the AC adapter to an electrical outlet that is known to be working properly to prevent a loss of power. Failure to do so may cause

system damage.

NOTE: Keyboard failure may result when a key on the keyboard is held down for extended periods of time. To avoid possible keyboard failure,

press and release <F12> in even intervals until the Boot Device Menu appears.

NOTE: The Quickboot feature changes the boot sequence for the current boot only. Upon restart, the computer boots according to the boot

sequence specified in system setup.

NOTICE: Do not interrupt this process once it begins. Doing so may cause system damage.

NOTICE: Connect the AC adapter to an electrical outlet that is known to be working properly to prevent a loss of power. Failure to do so may cause

system damage.

The file downloads to your desktop.



8. Click Close if the Download Complete window appears.

The file icon appears on your desktop and is titled the same as the downloaded BIOS update file.



9. Double-click the file icon on the desktop and follow the instructions on the screen.

Back to Contents Page



Back to Contents Page

Coin-Cell Battery

Dell™Latitude™E5400andE5500ServiceManual

Removing the Coin-Cell Battery

Replacing the Coin-Cell Battery

Removing the Coin-Cell Battery



1. Follow the procedures in Before Working on Your Computer.



2. Remove the bottom of the base assembly (see Removing the E5400 Bottom of the Base Assembly or Removing the E5500 Bottom of the Base

Assembly).



3. Disconnect the coin-cell battery cable connector from the system board.



4. Lift the coin-cell battery from the system board.

Replacing the Coin-Cell Battery



1. Connect the coin-cell battery cable connector to the system board.



2. Position the coin-cell battery on the system board.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional

safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

E5400 coin-cell battery

coin-cell battery cable connector

E5500 coin-cell battery

coin-cell battery cable connector

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional

safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTE: This procedure assumes that you have completed the removal procedure first.



3. Replace the bottom of the base assembly (see Replacing the E5400 Bottom of the Base Assembly or Replacing the E5500 Bottom of the Base Assembly).



4. Follow the procedures in After Working on Your Computer.

Back to Contents Page



Back to Contents Page

Processor Module

Dell™Latitude™E5400andE5500ServiceManual

Removing the Processor Module

Replacing the Processor Module

Removing the Processor Module



1. Follow the instructions in Before Working on Your Computer.



2. Remove the bottom of the base assembly (see Removing the E5400 Bottom of the Base Assembly or Replacing the E5400 Bottom of the Base Assembly).



3. Remove the fan (see Removing the Fan).



4. Remove the processor heat sink (see Removing the Processor Heat Sink).



5. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.



6. Lift the processor module from the ZIF socket.

Replacing the Processor Module



1. Align the pin-1 corner of the processor module with the pin-1 corner of the ZIF socket, then insert the processor module.

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTICE: To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.

ZIF-socket cam screw

ZIF socket

NOTICE: To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor heat sink. The oils in your skin can

reduce the heat transfer capability of the thermal pads.

NOTICE: When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module.

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTICE: Do not touch the processor die. Press and hold the processor down on the substrate on which the die is mounted while turning the cam screw

to prevent intermittent contact between the cam screw and processor.

NOTICE: Ensure that the cam lock is in the fully open position before seating the processor module. Seating the processor module properly in the ZIF

socket does not require force. A processor module that is not properly seated can result in an intermittent connection or permanent damage to the

microprocessor and ZIF socket.

NOTE: If you are installing a new processor, you receive a new processor heat sink, which will include an affixed thermal pad, or you will receive a new

thermal pad along with a tech sheet to illustrate proper installation.

NOTE: This procedure assumes that you have completed the removal procedure first.

Andere Handbücher für E5500 - Latitude - Core 2 Duo 2.53 GHz

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dell Laptop Handbücher

Dell

Dell Inspiron 11 Bedienungsanleitung

Dell

Dell Latitude 5300 2-in-1 Chrome Bedienungs- und Wartungshandbuch

Dell

Dell Inspiron 14 5000 Series Bedienungsanleitung

Dell

Dell Latitude 7210 2-in-1 Bedienungsanleitung

Dell

Dell Latitude 3000 Series Bedienungsanleitung

Dell

Dell Latitude 3000 Series Bedienungsanleitung

Dell

Dell Vostro 1520 Bedienungsanleitung

Dell

Dell Latitude D520 Bedienungsanleitung

Dell

Dell P103G001 Bedienungsanleitung

Dell

Dell Inspiron 24 3000 series Bedienungsanleitung

Dell

Dell Latitude D520 Bedienungsanleitung

Dell

Dell Latitude E6510 Bedienungsanleitung

Dell

Dell Inspiron 11 3000 Series Bedienungsanleitung

Dell

Dell Vostro 5390 Benutzerhandbuch

Dell

Dell Inspiron 14 5408 Bedienungsanleitung

Dell

Dell Inspiron 7500 Bedienungsanleitung

Dell

Dell XPS 15 9500 Bedienungsanleitung

Dell

Dell XPS 12 P20S Bedienungsanleitung

Dell

Dell Inspiron 3700 Bedienungsanleitung

Dell

Dell Vostro 5480 Bedienungsanleitung

Dell

Dell Chromebook 3100 2-in-1 Bedienungsanleitung

Dell

Dell Inspiron 7400 Bedienungsanleitung

Dell

Dell Inspiron 7420 Bedienungsanleitung

Dell

Dell XPS 9380 Bedienungsanleitung

Beliebte Laptop Handbücher anderer Marken

HP ze2401xt - Pavilion Notebook PC Bedienungsanleitung

Velocity

Velocity NoteMagix M10 Bedienungsanleitung

Toshiba

Toshiba A105-S2236 Bedienungsanleitung

HP ENVY 17 Handbuch

Winbook

Winbook LM Bedienungsanleitung

HP PROBOOK 4520S Handbuch

Sony

Sony VAIO PCG-R505JLK Bedienungsanleitung

Lenovo

Lenovo THINKPAD X32 Bedienungsanleitung

HP Compaq tc4200 Kurzanleitung

Toshiba

Toshiba mini NB300 Bedienungsanleitung

Sony

Sony VGN-T240P VAIO Bedienungsanleitung

Compaq

Compaq Armada E700 Series Bedienungsanleitung

Fujitsu

Fujitsu Lifebook A6230 Bedienungsanleitung

Acer

Acer Aspire ONE 722 Bedienungsanleitung

Toshiba

Toshiba L300-EZ1524 Bedienungsanleitung

Lenovo

Lenovo IDEAPAD S10-3S Bedienungsanleitung

Lenovo

Lenovo THINKPAD T42 Bedienungsanleitung

Gigabyte

Gigabyte A7 Bedienungsanleitung