Dell Active Fabric Manager Bedienungsanleitung
Dell Fabric Manager
Installation Guide 1.0.0
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
©2012 Dell Inc.
Trademarks used in this text: Dell™, the Dell logo, Dell Precision™, OptiPlex™, Latitude™, PowerEdge™, PowerVault™,
PowerConnect™, OpenManage™, EqualLogic™, Compellent™, KACE™, FlexAddress™, Force10™and Vostro™are trademarks of Dell
Inc. Intel®, Pentium®, Xeon®, Core®and Celeron®are registered trademarks of Intel Corporation in the U.S. and other countries. AMD®
is a registered trademark and AMD Opteron™, AMD Phenom™and AMD Sempron™are trademarks of Advanced Micro Devices, Inc.
Microsoft®, Windows®, Windows Server®, Internet Explorer®, MS-DOS®, Windows Vista®and Active Directory®are either trademarks
or registered trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat®and Red Hat®
Enterprise Linux®are registered trademarks of Red Hat, Inc. in the United States and/or other countries. Novell®and SUSE®are
registered trademarks of Novell Inc. in the United States and other countries. Oracle®is a registered trademark of Oracle Corporation
and/or its affiliates. Citrix®, Xen®, XenServer®and XenMotion®are either registered trademarks or trademarks of Citrix Systems, Inc. in
the United States and/or other countries. VMware®, Virtual SMP®, vMotion®, vCenter®and vSphere®are registered trademarks or
trademarks of VMware, Inc. in the United States or other countries. IBM®is a registered trademark of International Business Machines
Corporation.
2012 - 06
Rev. A0X
Contents
Notes, Cautions, and Warnings...................................................................................................2
1 Overview.......................................................................................................................................5
Hardware Requirements...........................................................................................................................................5
Port Requirements....................................................................................................................................................5
Software Requirements ...........................................................................................................................................6
Prerequisites.............................................................................................................................................................6
2 Installing the Dell Fabric Manager...........................................................................................7
3 Accessing the Dell Fabric Manager .....................................................................................13
4 Starting and Stopping the DFM on Windows 7....................................................................15
5 Restarting the Dell Fabric Manager.......................................................................................17
Restarting the DFM on Linux CentOS.....................................................................................................................17
Restarting the DFM on Windows 7.........................................................................................................................17
6 Uninstalling the Dell Fabric Manager....................................................................................19
Uninstalling the DFM on Linux CentOS...................................................................................................................19
Uninstalling the DFM on Windows 7:......................................................................................................................19
4
1
Overview
In this guide, you will learn how to install the Dell Fabric Manager (DFM) in your environment. For additional information
about using DFM—see the
Dell Fabric Manager Deployment Guide
and Online Help. To view the
Dell Fabric Manger
Deployment Guide
in the DFM, click the Help pull-down menu in the upper right of the screen.
NOTE: You cannot install the DFM with an existing PostgreSQL database.
Hardware Requirements
Table 1. Linux CentOS Hardware Requirements
Hardware Requirement
Processor Intel®Xeon®E5620 2.4Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem
System Type 64-bit operating system
Memory For Linux CentOS, 32GB Memory (8x4GB), 1333MHz Dual Ranked LV RDIMMs for 2
Processors, Advanced ECC
Disk Space 1TB 7.2K RPM SATA 3.5 Hot Plug Hard Drive
Table 2. Windows 7 Hardware Requirements
Hardware Requirement
Processor Intel®Core (TM) i5–2520M CPU @2.50Ghz
Memory 8 GB
System Type 64–bit operating system
Disk Space 1TB 7.2K RPM SATA 3.5 Hot Plug Hard Drive
Port Requirements
Port Number Description
443 and 80 DFM Server ports used to take request from client (browser)
161 For SNMP get and set protocol between DFM Server and switch.
162 For SNMP trap listener between DFM Server and switch.
5432 Database server
61616 ActiveMQ
5
Software Requirements
Table 3. Software Requirements for Linux CentOS
Software Notes
Linux CentOS 5.7
and 5.8
Linux CentOS requires administrator permission on the target server. Make sure that you have
permission on the network service account to modify the system temp directory. For Linux
CentOS, the temp directory is temp /tmp.
Internet Explorer 9
Chrome 18 and
higher
Firefox 12 and 13
Table 4. Software Requirements for Windows 7
Software Notes
Windows 7 Windows requires administrator permission on the target server. Make sure that you have
permission on the network service account to modify the system temp directory. For Windows,
the temp directory is (%systemroot%\temp)
Internet Explorer 9
Chrome 18 and
higher
Firefox 12 and 13
Prerequisites
Before you begin, gather the following information:
• Telnet credentials.
• Syslog IP address–Use this address to store the syslog messages.
• TFTP server address–Use this address to load the Dell Force10 operating software (FTOS) software images and
configuration files during bare metal provisioning (BMP).
• Password for DFM superuser.
• Simple network management protocol (SNMP) read and write community strings.
6
2
Installing the Dell Fabric Manager
The following section describes how to install the DFM on Windows 7 and Linux CentOS 5.7 and 5.8. After installation is
complete, see the
Dell Fabric Manager Deployment Guide
and Online Help for configuration and deployment information.
NOTE: You cannot install the DFM with an existing PostgreSQL database.
1. Close all your programs before installing the DFM.
2. Download the DFM software package.
For Linux CentOS, the software package is titled dfm_1.0.0.bin.
For Windows, the software package is titled dfm_1.0.0.exe.
You can access the download page on the web: https://www.force10networks.com/CSPortal20/Software/
Downloads.aspx
3. Click the software package link to begin the installation process.
The Introduction screen displays.
4. Click the Next button.
The License Agreement screen displays.
7
5. Click I accept the terms of the License Agreement and then click the Next button.
The Choose Install Folder screen displays.
6. In the Where Would you like to Install field, specify the destination directory to install the DFM.
For Linux, the default directory is /opt/dell/dfm.
For Windows, the default directory is C:\Program Files\Dell\Dell_Fabric_Manager.
The TFTP Information screen displays.
8
7. In the TFTP Address field, specify the trivial file transfer protocol (TFTP) server address to load the FTOS software
images and configuration files during bare metal provisioning (BMP). You can also select an address from the TFTP
address pull-down menu.
8. Click the Next button.
The Syslog/SNMP Information screen displays.
9. In the Syslog IP Address field, specify the syslog server IPv4 address to collect the syslog messages from the
switches in the distributed core.
10. Click the Next button.
11. In the SMNP Configuration area, enter the SNMP read and write community strings; for example, public and
private, so that the DFM can perform SNMP queries on the switches in the distributed core. The trap host uses the
default value from your current host IP address.
12. Click the Next button.
The Switch Telnet Credentials screen displays.
9
The Switch Telnet Credentials creates a user on the switches so that you can remotely make configuration
changes to the switches in the distributed core. The privilege level is set to 15 and is a read-only field. By default,
the installer uses the following switch credential information:
– default username—admin
– password— admin
– enable password— force10
13. From the Protocol pull-down menu, select one of the following protocols: Telnet, SSHv2, or Telnet & SSHv2.
14. Click the Next button.
The Port Configuration Information screen displays.
15. Enter the port number for the web servers and database server:
a) In the Web Server Port for (http) field; enter the HTTP web server port. The default value is 80
b) In the Web Server Port for (https); enter the HTTPS web server port. The default value is 443.
10
Andere Handbücher für Active Fabric Manager
3
Inhaltsverzeichnis
Andere Dell Server Handbücher
Dell
Dell PowerEdge Cluster FE100 Bedienungsanleitung
Dell
Dell XC730xd Bedienungsanleitung
Dell
Dell PowerEdge R510 Bedienungsanleitung
Dell
Dell PowerEdge systems 6300 Stücklistenhandbuch
Dell
Dell PowerEdge UPS 500T Bedienungsanleitung
Dell
Dell POWEREDGE DL385 Bedienungsanleitung
Dell
Dell EMC ScaleIO Ready Node 14G Bedienungsanleitung
Dell
Dell Force10 S2410-01-10GE-24P Bedienungsanleitung
Dell
Dell POWER EDGE SC1430 Bedienungsanleitung
Dell
Dell E665 Bedienungsanleitung
Dell
Dell PowerEdge T100 Bedienungsanleitung
Dell
Dell PS4000X Bedienungsanleitung
Dell
Dell PowerEdge R930 Bedienungsanleitung
Dell
Dell Wyse 7030 Bedienungsanleitung
Dell
Dell PowerEdge 4400 Allgemeine Anweisungen
Dell
Dell PowerEdge M1000e Bedienungsanleitung
Dell
Dell PowerEdge 2400 Bedienungsanleitung
Dell
Dell DX6012S Bedienungsanleitung
Dell
Dell PowerEdge 8450 Technisches Handbuch
Dell
Dell PowerEdge R830 Bedienungsanleitung
